• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.5
• /
• pp.810-816
• /
• 1996

This study was conducted to measure the hydration characteristics at $20^{\circ}C$ and investigated the effect of water to rice ratio(v/w) on the texture properties of cooked rice of ten different varieties based on maturity. Water absorptions during soaking were completed between 30min and 35min at $20^{\circ}C$. The ranges of equilibrium moisture content were between 0.3247g $H_2O/g$ dry matter and 0.3577g H201g dry matter. During the cooking process, the water content of cooked rice increased 6~7% with increased the ratio of water to rice from 1.4 to 1.6(v/w). The hardness(H) of cooked rice decreased, while the stickiness(-H) and -H/H ratio increased with increased ratio of water to rice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.288-295
• /
• 1999

Nineteen japonica and Tongil-type rices were selected from seventy nine Korean and Japanese rice cultivars grown in 1989 based on the water uptake behavior of milled rice under the room temperature and boiling conditions. The selected rice cultivars were investigated for water absorbability and some physicochemical characteristics of milled rice, proper water amount for cooking and sensory evaluation of cooked rice. The relationships among the tested grain properties were also examined. The highest varietal variation of water uptake rate was observed at twenty minutes after soaking in water. The maximum water uptake of milled rices at room temperature occurred mostly at about eighty minutes after soaking in water. Newly harvested rices showed a significantly lower water uptake rate of milled rice at 20 minutes after soaking, a relatively higher maximum water absorption ratio under the room temperature, and the less water uptake and volume expansion of boiled rice compared with the one-year old rice samples. The water uptake rate and the maximum water absorption ratio showed significantly negative correlations with the K/Mg ratio and alkali digestion value(ADV) of milled rice. The rice materials showing the higher amount of hot water absorption exhibited the larger volume expansion of cooked rice. The harder rices with lower moisture content revealed the higher rate of water uptake at twenty minutes after soaking and the higher ratio of maximum water uptake under the room temperature condition. These water uptake characteristics were not associated with the protein and amylose contents of milled rice ansd the palatability of cooked rice. The water/rice ratio(in w/w basis) for optimum cooking was averaged to 1.52 in dry milled rices (12% wet basis) with varietal range from 1.45 to 1.61 and the expansion ratio of milled rice after proper boiling was averaged to 2.63(in v/v basis). The water amount needed for optimum cooking was the lowest in Cheongcheongbyeo (Tongil-type rice) and the highest in Jinbubyeo, and the amount could be estimated with about 70% fittness by the multiple regression formula based on some water uptake characteristics, ADV and amylose content of milled rice as the independent variables. Nineteen rice cultivars were classified into seven groups based on scatter diagram projected by principal component analysis using eight properties related to water uptake and gelatinization of milled rice.

• Korean journal of food and cookery science
• /
• v.19 no.5
• /
• pp.571-580
• /
• 2003

The purpose of this study was to assess the optimum coating ratio for rice, using various ratios of mulberry leaves extract, 1.0, 1.5, and 2.0%, and to determine the optimum ratio of added water, in proportion to the total weight of mulberry rice. The moisture content of the soaked rice, and the optimum water uptake rate, moisture content of the cooked rice, as well as its blue and color values, mechanical characteristics, internal structure and sensory evaluation, were analyzed. The statistical data analyses were completed using the SAS program. The results are summarized as follows: The moisture content of mulberry rice was less than that of raw rice. The average optimum water uptake of the soaked mulberry rice at the different water temperatures, 10, 20 and 30, was 20% of the total weight of the raw mulberry rice. As for the results of the sensory evaluation,; 140% water, in proportion to the total weight of raw mulberry rice, was judged to be the optimum. The average moisture content of the cooked mulberry rice was 45∼50%, but there was no significant difference in the various coating ratios. The blue value of the cooked mulberry rice awas highest on the first day of cooking. The L- and a-values decreased with increasing coating ratio, but the b-value increased under the same conditions. As for the mechanical characteristics,; the adhesiveness, hardness and springiness decreased during 2 days of storage. The internal structure of the mulberry rice, observed by SEM, showed a close structure on increasing the coating ratios of mulberry leaves extracts. It was concluded that the optimum coating ratio of mulberry rice and ratio of added water for cooking wereas 1.5 and 140%, respectively, in proportion to the total weight of raw mulberry rice.

• Korean journal of food and cookery science
• /
• v.7 no.4
• /
• pp.71-86
• /
• 1991

This study was attempted to enhance nutritional value of cooked rice by adding milk in cooking water. Cooked and soaked rice with five different levels of milk in cooking water (0%, A: 30%, B: 50%, C: 70%, D: 100%, E) was tested for rheological parameters, fine structural changes, sensory evaluation. 1. Water absorbance of raw rice in cooking water with varying amountes of milk, was tested at $5^{\circ}C$ and $15^{\circ}C$ for 2 hours. Water absorption ratio was decreased as milk content was increased and soaking temperature was low. Time for maximum water absorption of sample A was 40 min at 1$15^{\circ}C$ but for sample B to D, it was not reached until 120 min. 2. Electronmicroscopic observation revealed that starch granules of rice lost their regular forms by soaking for 90 minutes, but recovered most of initial regularity after 24 hours. Increase in milk content of soaking water decreased marginal sharpness of the starch granule, presumably due to reduced swelling of the granule. 3. Degree of gelatinization of cooked rice was highest in sample A and progressively decreased as milk content was increased. It was, however, increased in all samples when the cooking water to rice ratio was raised from 160% to 180%. During 4 hour storage, rates of retrogradation were not different between A and B samples, but those of C, D and E were about 2.5 times higher than A and B under the optimal condition of 170% cooking water to rice ratio. This was in the order reverse to hardness order of AC>A, D＞E at cooking water to rice ratios of 160% and 170%, above which A sample surpassed the rest of samples. 4. Sensory evaluation conducted by fifteen university students as panelists showed that there were more significant differences among five samples in flavour, texture than appearance and a notable preference for b and C over A, D and E.

• Agricultural and Biosystems Engineering
• /
• v.7 no.1
• /
• pp.42-47
• /
• 2006

The objective of this study was to investigate the effects of air-phase germination with water-spraying and anion stimuli on germination ratio, sprout growth and ${\gamma}$-aminobutyric acid (GABA) of brown rice. Air-phase germination method with intermittent spraying water improved germination ratio and sprout growth by about 100% compared with the conventional water-soaking method. Anion radiation was applied during the germination process and improved the germination ratio, sprout growth and color quality of the germinated brown rice. Germination ratio and sprout growth were improved up to 9% with anion radiation, and its brightness was higher than brown rice germinated with no anion radiation. The air-phase germination with water-spraying improved the GABA content of germinated brown rice by about 8-9 times compared with that of brown rice.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.445-456
• /
• 1998

This study was carried out to evaluate the performance of a medium scale rice polisher of 2.5 t/h and to improve its performance for producing the clean rice with high quality. The maximum internal pressure, broken rice ratio. whiteness in the rice polisher were investigated, and the effects of outlet resistance, water spraying rate, shaft revolution speed and rice moisture content on the polishing performance were analyzed to find out proper operating conditions. The conclusions of this study were as follows: 1. In the performance evaluation of the polisher, the broken rice ratio increment of 0.1%, the max. internal pressure of about 11 N/${cm}^2$, and whiteness increment of 2.2~3.7 resulted at the conditions of 20 PS driving power, 950 rpm, 150 cc/min water spraying rate, 44.1 Nㆍcm outlet resistance and about 15% rice moisture content. 2. Though max. internal pressure and whiteness at the 17% rice moisture content were higher than those at the 15% moisture content under the same operating conditions of the polisher, but the broken rice rate at the 17% moisture content was absolutely low compared with that at 15% moisture content. The water spraying effect to reduce broken rice and to increase whiteness was much significant at the 15% moisture content not significant at 17% moisture content. 3. The main parameter of the performance was outlet resistance, and low resistance of about 44.1 Nㆍcm was recommended at the polisher. 4. The proper water spraying rate in the polisher was about 150 cc/min. 5. As the shaft revolution speed decreased from 950 rpm and 800 rpm to 650 rpm, the broken rice ratio increased and whiteness decreased. 6. As the driving power of the polisher increased from 20 PS to 30 PS, the max. internal pressure decreased by about 1~2.5 N/${cm}^2$ and whiteness increased by about 1~2, but the broken rice rate was not changed. 7. The proper operating conditions of the polisher seemed to be the revolution speed of 800-950 rpm, the water spraying rate of about 150 cc/min, the oulet resistance of about 44.1 N.cm and 30 PS driving power.

• Journal of the Korean Home Economics Association
• /
• v.8 no.1
• /
• pp.93-99
• /
• 1970

To Know the factors required to make best quality of steamed rice with large amount of rice, several organizations that serve meals were surveyed. Factor that mostly influence the amount of water to the amount of rice is a kind or rice. In the case of good quality rice, when the amount of rice is more than 10cups, the ratio of water to rice is 0.9 and that of poor quality rice is 0.7 Average ratio is 0.8 Therefore, ordinarily with the ratio of 0.8, good quality of steamed rice can be made. Washed rice should be used to measured the of rice. To make a good quality of steamed rice with large amount of rice, center part of the boiling rice should be stirred generously several times to equalize the temperature.

• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 2001.12a
• /
• pp.39-74
• /
• 2001

The endeavors enhancing the grain quality of high-yielding japonica rice were steadily continued during 1980s∼1990s along with the self-sufficiency of rice production and the increasing demands of high-quality rices. During this time, considerably great, progress and success was obtained in development of high-quality japonica cultivars and qualify evaluation techniques including the elucidation of interrelationship between the physicochemical properties of rice grain and the physical or palatability components of cooked rice. In 1990s, some high-quality japonica rice caltivars and special rices adaptable for food processing such as large kernel, chalky endosperm aromatic and colored rices were developed and its objective preference and utility was also examined by a palatability meter, rapid-visco analyzer and texture analyzer. The water uptake rate and the maximum water absorption ratio showed significantly negative correlations with the K/Mg ratio and alkali digestion value(ADV) of milled rice. The rice materials showing the higher amount of hot water absorption exhibited the larger volume expansion of cooked rice. The harder rices with lower moisture content revealed the higher rate of water uptake at twenty minutes after soaking and the higher ratio of maximum water uptake under the room temperature condition. These water uptake characteristics were not associated with the protein and amylose contents of milled rice and the palatability of cooked rice. The water/rice ratio (in w/w basis) for optimum cooking was averaged to 1.52 in dry milled rices (12% wet basis) with varietal range from 1.45 to 1.61 and the expansion ratio of milled rice after proper boiling was average to 2.63(in v/v basis). The major physicochemical components of rice grain associated with the palatability of cooked rice were examined using japonica rice materials showing narrow varietal variation in grain size and shape, alkali digestibility, gel consistency, amylose and protein contents, but considerable difference in appearance and torture of cooked rice. The glossiness or gross palatability score of cooked rice were closely associated with the peak. hot paste and consistency viscosities of viscogram with year difference. The high-quality rice variety “Ilpumbyeo” showed less portion of amylose on the outer layer of milled rice grain and less and slower change in iodine blue value of extracted paste during twenty minutes of boiling. This highly palatable rice also exhibited very fine net structure in outer layer and fine-spongy and well-swollen shape of gelatinized starch granules in inner layer and core of cooked rice kernel compared with the poor palatable rice through image of scanning electronic mcroscope. Gross sensory score of cooked rice could be estimated by multiple linear regression formula, deduced from relationship between rice quality components mentioned above and eating quality of cooked rice, with high Probability of determination. The ${\alpha}$ -amylose-iodine method was adopted for checking the varietal difference in retrogradation of cooked rice. The rice cultivars revealing the relatively slow retrogradation in aged cooked rice were Ilpumbyeo, Chucheongbyeo, Sasanishiki, Jinbubyeo and Koshihikari. A Tongil-type rice, Taebaegbyeo, and a japonica cultivar, Seomjinbyeo, shelved the relatively fast deterioration of cooked rice. Generally, the better rice cultivars in eating quality of cooked rice showed less retrogiadation and much sponginess in cooled cooked rice. Also, the rice varieties exhibiting less retrogradation in cooled cooked rice revealed higher hot viscosity and lower cool viscosity of rice flour in amylogram. The sponginess of cooled cooked rice was closely associated with magnesium content and volume expansion of cooked rice. The hardness-changed ratio of cooked rice by cooling was negatively correlated with solids amount extracted during boiling and volume expansion of cooked rice. The major physicochemical properties of rice grain closely related to the palatability of cooked rice may be directly or indirectly associated with the retrogradation characteristics of cooked rice. The softer gel consistency and lower amylose content in milled rice revealed the higher ratio of popped rice and larger bulk density of popping. The stronger hardness of rice grain showed relatively higher ratio of popping and the more chalky or less translucent rice exhibited the lower ratio of intact popped brown rice. The potassium and magnesium contents of milled rice were negatively associated with gross score of noodle making mixed with wheat flour in half and the better rice for noodle making revealed relatively less amount of solid extraction during boiling. The more volume expansion of batters for making brown rice bread resulted the better loaf formation and more springiness in rice bread. The higher protein rices produced relatively the more moist white rice bread. The springiness of rice bread was also significantly correlated with high amylose content and hard gel consistency. The completely chalky and large gram rices showed better suitability for fermentation and brewing. Our breeding efforts on rice quality improvement for the future should focus on enhancement of palatability of cooked rice and marketing qualify as well as the diversification in morphological and physicochemical characteristics of rice grain for various value-added rice food processings.

• Korean Journal of Human Ecology
• /
• v.5 no.1
• /
• pp.81-88
• /
• 1996

The effects of water to rice ratio on the properties of cooked nonwaxy and waxy rice during storage were investigated by sensory evaluation and instrumental test by Instron. The result of sensory evaluation revealed more significant difference in most of texture characteristics than flavour. As the water to rice ratio increased, the moisture content of cooked rice increased and the value of moistness and plumpness increased but that of hardness decreased. Overall eating quality was the highest in cooked nonwaxy rice with 1.4(water/rice) and in cooked waxy rice with 1.2(water/rice). In the case of instrumental test, hardness showed highly significant difference and the value of hardness of nonwaxy cooked rice was greater than that of waxy cooked rice.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.245-252
• /
• 1998

The structural characteristics of a small scale rice polisher was analyzed to improve its performance. Spraying characteristic of nozzles used for rice polishing was also analyzed by a machine vision system. The internal pressure of the polishing chamber was measured according to outlet resistance, water spraying, and roller shaft speed. In addition, the performance of the rice polisher was evaluated to improve it in the basis of internal pressure in polishing chamber, whiteness, and broken rice ratio of clean rice according to the operating conditions. Actual nozzle discharge rate and drop size were 125 cc/min and 86~97 ${\mu}{\textrm}{m}$, respectively. In the case of water spraying on rices, the internal pressure showed 4.9~9.8N/$\textrm{cm}^2$ increase. broken rice ratio decreased, and there was no difference in whiteness. The internal pressure inueased up to two times with the increase of the outlet resistance. Also, the pressure at the upper part of screen was one and half times as high as the pressure at the lower part. In the case of water spraying rate of 150 cc/min, the roller shaft speed of 850 rpm resulted in no difference in whiteness and decrease of 0.3% in broken rice ratio, comparing to the roller shaft speed of 950 rpm.