• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.780-790
• /
• 2020

In this study, the cell-wall microstructure and anti-swelling effectiveness (ASE) of heat-treated larch wood were evaluated and the correlation between them was analyzed. For this purpose, some larch lumbers were heat-treated for 12, 18, and 24 hours at temperatures of 190℃ and 220℃. By observing the scanning electron microscopy cross-sectional image of the heat-treated larch, it was confirmed that the shape of heat-treated wood cell changed, the cut-section of the wood cell wall was rough, and the intercellular space has become wide as the intercellular bonds had broken because of heat-treatment. In addition, the evaluation of the swelling for each treatment condition revealed that, as the heat-treatment temperature and duration increased, the amount of absorbed water and swelling decreased and the ASE increased. The decrease in the amount of absorbed water is thought to be affected by the chemical change in the cell wall by heat-treatment. On the contrary, the decrease in the swelling and the increase in the ASE are thought to be due to a combination of chemical changes and physical changes such as structural changes in the cell wall.

• Advances in materials Research
• /
• v.3 no.4
• /
• pp.183-197
• /
• 2014

Copolymers of gelatin and poly (vinyl alcohol), (PVA) grafted by acrylic acid (AAc) with excellent water absorption and retention abilities under neutral conditions were successfully synthesized using $^{60}Co$ gamma radiations in presence of ammonium persulphate (APS), as water soluble initiator and sodium bicarbonate ($NaHCO_3$) as foaming agent. The optimum synthesis conditions pertaining to maximum swelling percentage were evaluated as a function of gelatin/PVA ratio, amount of water, concentration of APS, $NaHCO_3$, monomer concentration and total irradiation dose. Maximum percent swelling (1694.59%) of the copolymer, gelatin-co-PVA, was obtained at optimum $[APS]=2.92{\times}10^{-1}mol/L$, $[NaHCO_3]=7.94{\times}10^{-2}mol/L$ and 1.5 mL of water at total dose of 31.104 kGy while in case of grafted copolymer, (gelatin-co-PVA)-g-poly(AAc), maximum percent swelling (560.86%) was obtained using $8.014{\times}10^{-1}mol/L$ of AAc in 9 mL water with 31.104 kGy preirradiation dose. The pristine and grafted copolymers were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning electron Microscopy (SEM), Thermal gravimetric analysis (TGA) and X-Ray Diffraction (XRD) methods. The copolymers loaded with an antiseptic, Povidone, were used as wound dressing materials for wounded gastrocnemius muscle of mice and the results exhibit that (gelatin-co-PVA)-g-poly (AAc) copolymer is a potent wound dressing material as compared to the copolymer.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.2
• /
• pp.132-136
• /
• 1995

This study was carried out to elucidate the effective of some swelling agents on the soaking treatment of raw silk. The swelling of raw silk is commonly practiced by soaking in warm water, However, it is not enough to weaving of raw silk. Therefore, the combination of some chemical agents were tested to improve the swelling ratio of raw silk. The pretreatment of raw silk in 0.4N sodium carbonate aqueous solution before soaking in the mixed solution of Emulon 1 g/l, Emanol 0.5 g/l and 0.04N sodium silicate increased the swelling ratio by 57%, compared to the nontreatment. In SEM observation, the surface of raw silk soaked in swelling agents was swollen and smoothed.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.2
• /
• pp.25-35
• /
• 1990

To investigate the effects of swelling treatment by ammonia on characteristics of carboxymethy1cellulose(CMC) and CMC solution, the domestic kraft pulp pretreated with 5%, 10%, 15% and 20% $NH_4OH$ solution, was carboxymethylated by the standard method, and then the CMC prepared was tested. The physical properties of CMC and CMC solution, such as degree of substitution, transparency. viscosity, weight increase and solubility, were measured, and the comparison with commercial domestic CMC used as a food additive was done. The results obtained were as follows; 1. In CMC manufactured by standard solvent method, hardwood bleached kraft pulp(LBKP) was more substituted than safwood bleached kraft pulp(NBKP), and viscosity of NBKP was higher than that of LBKP. 2. When ammonia swelling treatment was done, degree of substitution gradually decreased with increasing concentration of $NH_4OH$, and degree of substitution of LBKP decreased with a larger range than that of NBKP. 3. When ammonia swelling treatment was done. transparency of CMC solution from LBKP was hardly effected, but in case of NBKP gradually increased with increasing concentration of $NH_4OH$. 4. When ammonia swelling treatment was done, viscosity of CMC solution was higher than that of CMC solution without ammonia swelling treatment. Especially, CMC of high viscosity could be manufactured in 5%, 10% concentration levels of $NH_4OH$. 5. In CMC manufactured from domestic NBKP, CMC at the range of 0.40 to 0.50 in DS was dispersed easily and quickly dissolved, and CMC at more than 0.50 in DS was dispersed slowly in water solution. 6. In comparison with commercial domestic CMC used as a food additive, CMC manufactured from domestic NBKP was higher in DS, and was lower in viscosity and transparency.

• Geotechnical Engineering
• /
• v.12 no.2
• /
• pp.33-42
• /
• 1996

The weathering of mudrock in the Pohang area is mainly caused by slaking and swelling when the mudrock is absorbed with water. In this regard, this paper chows the results of chemical analysis and the identification of rock-forming minerals from XRD. It also compares the slaking and swelling characteristics of mudrocks sampled from 3 different sites. The chief rock -forming minerals are the quartz, and the several types of clay minerals. The slake durability indices are ranged from 71% to 96%, and these values are closely related to the liquid limit of the powdered nock specimen. In a similar manner to the slaking characteristics the greatest values of the swelling pressure and the swelling strain were measured from the mudrock specimen with the highest value of liquid limit. The greatest measured values of the swelling pressure and the swelling strain are 9.4 kg 1 cm2 and 33.5% respectively. The residual sheer strength of mudrock decreases as the number of wet -diy cycles increases, and the residual strength at 5 cycles are measured to c,=0.24kg/cm2 and p,=28$^{\circ}$. The lowest residual strength is measured at the fresh rock -rock contact surface in the moist condition of which values are cr: 0 and n,: 21.5$^{\circ}$.

• Textile Coloration and Finishing
• /
• v.17 no.1
• /
• pp.30-37
• /
• 2005

The tensile properties, acetic acid solubility and degree of swelling in distilled water of cellulose/chitosan and sericin/chitosan film blended by mixing chitosan acetic acid solution with cellulose solution or sericin solution were investigated and the effect of crosslinking agent on solubility and degree of swelling were also considered. From the experimental results, the model of intermolecular bond is proposed. Tensile modulus of 100% cellulose film is high but the tensile strength and elongation are low. The elongation of 100% chitosan film is high but tensile modulus and strength is low. But it is possible to make film having same or higher tensile strength and modulus compared to that of 100% cellulose film by mixing cellulose and chitosan or by mixing sericin and chitosan. Chitosan is solved in 5vol % acetic acid solution but cellulose and sericin are not solved. Degree of swelling of chitosan in distilled water is higher than that of cellulose and sericin. Lower than 40wt% chitosan content, the solubility of cellulose/chitosan film in 5vol % acetic acid solution shows lower expected value but higher in case of sericin/chitosan film.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.1
• /
• pp.38-52
• /
• 1995

The liposomes have been developed in many drugs and cosmetics fields. In this context, it should be mentioned that MLV liposomes can be prepared standing with the main compounds of the intercellular lipids, cholesterol, palmitic acid, cholesteryl ester and lecithin, by swelling reaction. We report properties of the formation of MLV liposomes with use of the lipid base and Microfluidizer. MLV liposomes formed as multilamellar vesicles(MLV). The effect of the gelation of MLV liposomes have been on swelling reaction which have been mixed lipid with polyol and water phase at high temperature(90$\pm$5$^{\circ}C$). MLV liposomes have been prepared in incorporating alpha hydroxy acid ligrediens. Optimum condition of MLV liposomes were passed three times in the microfluidizer, particle size of the vesicles should be within 150-350nm and those confirmed by freeze-fracture electron microscopy.

• Geomechanics and Engineering
• /
• v.8 no.5
• /
• pp.687-706
• /
• 2015

Methods commonly used to evaluate the improvement of lime-treated expansive soil include swelling characteristics and unconfined compressive strength. In the field, lime-treated expansive soils are in compacted unsaturated state. Soil water characteristic curves (SWCCs) represent a key parameter to interpret and describe the behavior of unsaturated expansive soil. This paper investigates the use of SWCC as a technique to evaluate improvements acquired by expansive soil after lime treatment. Three different lime contents were considered 2%, 4% and 6% by dry weight of clay. Series of tests were performed to determine the SWCC for the different lime content under curing periods of 7 and 28 day. Correlations between key features of the soil water characteristic curves of lime treated expansive soils and basic engineering behavior such as swelling characteristics and unconfined compression strength were established. Test results revealed that initial slope ($S_1$), saturated water content ($w_{sat}$), and air entry value (AEV) play an important role in reflecting improvement in engineering behavior achieved by lime treatment.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.626-631
• /
• 2014

Water purification requires a large amount of energy that can cause pollution problems. For this reason, forward osmosis (FO) has attracted intense interest that required a relatively low amount of energy for water purification. The forward osmosis has a serious problem that it needs drawing agents creating osmotic pressure to extract water from contaminated water. In this study, a copolymer of zwitterionic moiety and an interpenetrating polymer network (IPN) hydrogel based on thermo-responsive polymer hydrogel, poly(N-isopropylacrylamide) (PNIPAM) were prepared and attached on FO membranes, which successfully played the role of drawing agents. In the copolymer hydrogel, its swelling ratio was improved, but thermo-sensitivity was decreased. The swelling ratio and thermo-sensitivity of IPN hydrogel was lowered. We could confirm that swelling ratio is related to osmotic pressure.

• Journal of agriculture & life science
• /
• v.46 no.2
• /
• pp.43-48
• /
• 2012

This study was investigated on the properties of board made from Miscanthus sinensis var. purpurascens particles differed in density of board and mixed ratio of powder type- and liquid type-phenolic resin. As the board density increase, thickness swelling and bending strength increased while water absorption decreased. With increasing the resin content, water absorption and thickness swelling decreased while MOR and internal bond strength increased. The board made of liquid type phenol-formaldehyde resin was low in water absorption and thickness swelling, and there were similar bending strengths between power type- and liquid type-phenol resin in resin cont of 11% and 13% at the board density $0.4g/cm^3$ and internal bond strength was higher with liquid type-phenolic resin in its bending strength.