• 한국지반공학회논문집
• /
• 제37권11호
• /
• pp.83-92
• /
• 2021

본 연구에서는 공극률이 큰 포항지역 이암의 특성을 평가하고자 유효공극률 측정, 전자 현미경(SEM) 관찰 및 X-선 회절분석(XRD), 슬레이킹, 팽창, 수침기간에 따른 일축압축강도 특성을 분석하였다. 16개의 시험편(정육면체, 5cm)에 대한 시험결과, 유효공극률(porosity)은 평균 14.67%로 일반적인 이암 공극률보다 높은 공극률을 보였으며, 전자 현미경(SEM) 관찰을 통해 실제로 공극률이 큼을 확인하였다. X-선 회절분석결과 팽윤성 점토광물 함유량은 2.3~4.1%(녹니석, 카올린)로 선행연구 된 포항지역 이암보다 낮은 점토 함유량을 보였다. 슬레이크 내구성 지수는 37.73~87.73%로 저~중정도 내구성을 보여 선행연구 결과 대비 다소 낮은 내구성을 보였으며, 팽윤성은 30분간 장축방향 최대 흡수팽창 변화률 1.79~1.82%로 급격하게 팽창함을 확인하였다. 수침에 따른 일축압축강도 감소 특성은 수침 10분 경과 후 만에 시험편이 급격히 풍화되어 강도가 감소하여 기존 포항지역 이암과 관련된 선행연구의 결과와도 상이함을 확인하였다. 이것은 연구대상 이암의 큰 공극률 때문으로 판단된다.

• 폴리머
• /
• 제31권4호
• /
• pp.349-355
• /
• 2007

열 응답성을 갖는 poly(N-isopropylacrylamide) (PNIPAAm) 수화젤의 팽윤 및 수축 특성을 변화시키기 위하여, 물을 용매로 하여 AN 함량이 10 mol% 이내인 P(NIPAAm-co-AN) 공중합체 및 이들의 수화젤을 합성하였고, AN 함량이 공중합체 수화젤의 임계젤전이온도(CGTT) 및 팽윤 거동에 미치는 영향을 분석하였다. 공중합체 수화젤들은 $30{\sim}32\;^{\circ}C$에서 CGTT를 나타내었으며, AN 함량이 증가함에 따라 CGTT는 저온 쪽으로 이동하였다. 이들 공중합체 수화젤을 CGTT 이하 온도의 물에서 팽윤시키면 AN 함량이 많아짐에 따라 팽윤속도가 느려지고 평형 팽윤비 값이 작아지지만, CGTT 이상에서 수축시키면 AN 함량이 많은 수화젤이 더 빠르고 더 많이 수축하였다.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.311-317
• /
• 2003

일정변형속도 압밀시험(CRS)을 이용하여 점성토의 팽창지수 산정 특성을 조사하였다. CRS압밀시험에서 재하단계의 변형률은 0.05%/min와 0.03%/min을 적용하였으며, 재하단계에서는 재하단계의 변형속도의 1/1, l/5, 1/10, 1/15에 해당하는 변형속도를 적용하였다. 표준압밀시험과 비교하여 팽창지수를 산정한 결과 1/5∼1/10정도의 변형속도를 적용했을 때 서로 유사한 팽창지수가 산정되었다. 또한, 유효응력과 과잉간극수압비의 관계에서 교차점이 존재함을 알았으며 이 교차점을 기준으로 변형속도에 의존적인 부분과 비의존적인 부분이 존재함을 알 수 있었다.

• Membrane and Water Treatment
• /
• 제4권2호
• /
• pp.127-142
• /
• 2013

In order to investigate the significance of "salting-out" and "pore swelling" effects on the nanofiltration of neutral solutes, rejection properties of two NF ceramic and polymeric membranes were studied with single polyethyleneglycol (PEG) solution and mixed PEG/inorganic electrolyte solutions. For both membranes, the rejection rate of PEG was found to decrease significantly in the presence of ions. In the case of the ceramic membrane (rigid pores), this phenomenon was imputed to the sole partial dehydration of PEG molecules induced by the surrounding ions. This assumption was confirmed by the lowering of the PEG rejection rates which followed the Hofmeister series. Experimental data were used to compute the resulting decrease in the Stokes radius of PEG molecules in the presence of the various salts. Concerning the polymeric membrane, the decrease in the rejection rate was found to be systematically higher than for the ceramic membrane. The additional decrease was then ascribed to the swelling of the pores. The experimental data of rejection rates were then used to compute the variation in the mean pore radius in the presence of the various salts. The pore swelling phenomenon due to accumulation of counterions inside pores was supported by electrokinetic charge density measurements.

• Macromolecular Research
• /
• 제12권3호
• /
• pp.269-275
• /
• 2004

To graft N-isopropylacrylamide (NIPAAm) onto alginate, varying dosages of ${\gamma}$-rays were irradiated onto alginate films in deionized water and methanol media, which are non-solvents of alginate. We investigated the hydrogels graft ratio, mechanical strength, swelling kinetics and ratio, and behavior with respect to drug release. The graft yield of NIPAAm increased upon increasing the irradiation dose. The use of the aqueous solution increased the graft yield relative to that obtained in methanol. The mechanical strength of the grafted hydrogels increased after grafting with NIPAAm. In a study of the swelling kinetics, we found that all hydrogels reached an equilibrium swollen state within 3 h. The equilibrium swelling ratio of the hydrogels decreased upon increasing the irradiation dose. The swelling ratio of the hydrogels decreased dramatically between 30 and 35$^{\circ}C$ because phase separation of NIPAAm occurred at 32$^{\circ}C$. The swelling process, with respect to the temperature change, was repeatable. An NIPAAm-grafted alginate containing a drug sustained its release rate until 3 h after an initial high drug release caused by a burst effect.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.46-56
• /
• 1998

The objective of this study was to investigate the relationship between water vapor diffusion properties and the pore structure of paper. Gas-phase molecular diffusivity of water vapor through pores was determined based on the kinetic theory of gas. A mathematical model was derived to characterize the dimensional changes of the pore caused by the fiber-swelling mechanism. A modified-Fickean diffusion model was designed to simulate the water-vapor diffusion phenomena in porous paper web. Structural characterisocs of paper pores including the tortuosity and the shape factor was studied on a theoretical basis of Knudsen flow diffusion. Results are summarized as follows: 1. The theoretical water vapor diffusivity in gas-phase was 0.092$cm^2$ /min, 2. Porosity was inversely proportional to the degree of wet-swelling of paper, 3. Solid-phase water-diffusivity of fiber was 1.2 $ \times 10^{-5}cm^2/min$, 4. Modified diffusion model was fairly consistent to the experimental data (from part I), and 5. The Fickean pore tortuosity, ranging from 1,000 to 2,500, was in inverse proportion to the porosity of paper, and the Knudsen shape factor and length-angle factor for micro-pores in paper were 0.5~3.5 and about 340, respectively.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제42권2호
• /
• pp.67-76
• /
• 2016

Dracunculiasis, otherwise known as guinea worm disease (GWD), is caused by infection with the nematode Dracunculus medinensis. This nematode is transmitted to humans exclusively via contaminated drinking water. The transmitting vectors are Cyclops copepods (water fleas), which are tiny free-swimming crustaceans usually found abundantly in freshwater ponds. Humans can acquire GWD by drinking water that contains vectors infected with guinea worm larvae. This disease is prevalent in some of the most deprived areas of the world, and no vaccine or medicine is currently available. International efforts to eradicate dracunculiasis began in the early 1980s. Most dentists and maxillofacial surgeons have neglected this kind of parasite infection. However, when performing charitable work in developing countries near the tropic lines or other regions where GWD is endemic, it is important to consider GWD in cases of swelling or tumors of unknown origin. This paper reviews the pathogenesis, epidemiology, clinical criteria, diagnostic criteria, treatment, and prevention of dracunculiasis. It also summarizes important factors for maxillofacial surgeons to consider.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2005년도 수소연료전지공동심포지움 2005논문집
• /
• pp.233-240
• /
• 2005

A series of inorganic-organic hybrid membranes were prepared with a systematic variation of titanium dioxidenanoparticles content. Their water uptake, methanol permeability and proton conductivity as a function of inoranic oxide content were investigated. The results obtained show that the inorganic oxide network decreases the proton conductivity and water swelling. It is also found that increase In inorganic oxide content leads to decrease of methanol permeability. In terms of the morphology, membranes are homogeneous and exhibit a good adhesion between inorganic domains and the polymer matrix. The properties of the composite membranes are compared with the standard nafion membrane.

• 대한의용생체공학회:의공학회지
• /
• 제28권3호
• /
• pp.344-347
• /
• 2007

A interpenetrating polymer network (IPN) hydrogel, composed of chitosan (CS) and poly(diallydimethylammonium chloride) (PDADMAC) was prepared, which exhibited electrical sensitive behavior. The swelling behavior of the CS/PDADMAC SIPN hydrogel was studied by immersion of the gel into various pH buffer solutions, and their stimuli response in electric fields also investigated. In order to clarify the relationship between the equilibrium swelling ratio and bending behavior of the SIPN hydrogels, the state of water in the SIPN hydrogel was also investigated using differential scanning calorimetry (DSC).

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.52-58
• /
• 2006

Coffee chaff for manufacturing of the 6 mm thick cement-bonded boards was obtained from a coffee processing industry at Omuo-Ekiti, in Ekiti State, Nigeria. Boards were produced with three levels of cement to coffee chaff ratio of 1.5:1, 2.5:1 and 3.5:1; and at three levels of mixing curing reagent of 2.0%, 2.5% and 3.0%. Three dimensional properties of thickness swelling (TS), water absorption (WA) and linear expansion (LE) were investigated after 48 hours immersion in water. The mean values obtained for TS, WA and LE ranged from 0.46% to 1.47%, from 11.52% to 24.00%, from 0.19% to 0.35%, respectively. The most dimensionally stable boards were produced at the highest mixing levels of curing reagent and cement to coffee chaff ratio of 3.0% and 3.5:1, respectively. The coffee chaff is suitable as raw material for the manufacture of cement-bonded composites and it would be able to stimulate and activate the use of other agro-byproducts for the manufacture of value-added panels.