• 제목/요약/키워드: water surface discharge

검색결과 635건 처리시간 0.021초

가을철 영일만수괴의 일반해양학적 특성 (General Oceanographic Factors In Yeongil Bay Of Korea, Late October 1973)

  • 곽희상
    • 한국해양학회지
    • /
    • 제11권2호
    • /
    • pp.89-95
    • /
    • 1976
  • 우리 나라 연안에 대한 해양학적 조사는 그렇게 조직적으로 조사된 편이 못된다. 1960년대 이후로 수질오염과 관련해서 연안수질조사를 많이 실시해왔지만(원;1963, 1964, 1970, 장과 배;1968, 박 등;1969, 이 등;1969, 김;1970, 원과 박;1970, 1973, 최와 정;1971, 1972, 강;1972, 이 등;1972a, b, 1973, 1974a, b, c, d, e, 1975a, b, 변 등;1973, 한 등;1973, 황 등;1973, 1974, 1975, 김과 조;1974a, b, 박 등;1974a, b 박과 조;1974, 이 등;1974, 정과 권;1974, 곽과 이;1975, 박 등;1975, 박;1975a, b, 김 등;1976, 김 등;1976, 김과 김;1976) 대부분이 해양의 특성을 파악하는데 불충분했고 단 한번을 조사하더라도 면밀한 조사를 실시한 예는 그리 많지 못하다.

  • PDF

식생된 수로에서의 수위변화 분석 (Change of Water Level in Vegetated Channels)

  • 김병찬;윤성준;김민정;이종석
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
    • /
    • pp.780-783
    • /
    • 2008
  • 본 연구는 Manning's coefficient 와 Chezy coefficient를 이용하여 양재천 하도의 조도를 산정할 수 있는 모형을 개발하였다. 계산된 등가조도는 수위-유량자료가 없는 하천에서 수위, 유량 및 조도계수를 산정하는데 이용하였다. 조도계수는 대상구간에 대해 부정류 해석을 수행하여 유량규모별로 수위를 산정하였다. 그 결과 식생이 있을 때와 없을 때의 수위차가 1.29m 이었고, 식생밀도가 증가함에 따라 흐름저항이 크게 증가함을 알 수 있었다.

  • PDF

Surface modification of $TiO_2$ by atmospheric pressure plasma

  • 조상진;정충경;부진효
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.96-96
    • /
    • 2010
  • To improve surface wettability, each sample was treated by atmospheric pressure plasma (APP) using dielectric barrier discharge (DBD) system. Argon and oxygen gases were used for treatment gas to modify the $TiO_2$ surface by APP with RF power range from 50 to 200 W. Water contact angle was decreased from $20^{\circ}$ to $10^{\circ}$ with argon only. However, water contact angle was decreased from $20^{\circ}$ to < $1^{\circ}$ with mixture of argon and oxygen. Water contact angle with $O_2$ plasma was lower than water contact angle with Ar plasma at the same RF power. It seems to be increasing the polar force of $TiO_2$ surface. Also, analysis result of X-ray photoelectron spectra (XPS) shows the increase of intensity of O1s shoulder peak, resulting in increasing of surface wettability by APP. Moreover, each water contact angle increased according to increase past time. However, contact angle increase with plasma treatment was lower than without plasma treatment. Additionally, the efficiency of $TiO_2$ photocatalyst was improved by plasma surface-treatment through the degradation experiment of phenol

  • PDF

Sputter etching에 의한 PET직물의 심색성 향상 (Increase in Color Depth of Black Dyed PET Fabrics Treated by Sputter Etching)

  • Shim, Yu Bong;Lee, Mun Cheul
    • 한국염색가공학회지
    • /
    • 제9권1호
    • /
    • pp.15-22
    • /
    • 1997
  • The alkali treated and black dyed PET fabrics were sputter etched under Ar gas atmosphere. The color depth of PET fabrics were increased with sputter etching time only under some limits of discharge power. And above that limits of discharge power the color depth of PET fabrics was decreased by increasing discharge power and treatment time. Minute cracks were made by sputter etching in the whole surface of fabrics to the direction of perpendicular to the longitudinal side of yarns. The fineness and density of minute crack were increased with lowering discharge power. And the size of crack was far smaller than that of microcrater which was obtained by alkali treatment. It is considered that the increase of color depth is related to the minute crack. The water permeation time of sputter etched fabrics was increased with increasing discharge power and treating time. The increase of color depth attained by sputter etching was fully kept through repeated laundering.

  • PDF

코로나 방전처리와 그라프트 중합에 의한 카르복시산기의 기울기 표면 제조에 관한 연구 (Study on the Gradient Surface of Carboxylic Acid Group Using Corona Discharge Treatment and Subsequent Graft Polymerization)

  • 김형우;이문철;박병기
    • 한국염색가공학회지
    • /
    • 제6권2호
    • /
    • pp.17-23
    • /
    • 1994
  • Carboxylic acid group gradient surface where the density of carboxylic acid groups changes gradually along the sample length was prepared. Carboxylic acid group gradient surface was produced by the treatment of low density polyethylene sheet using a corona with gradually increasing power, followed by the grad polymerization of acrylic acid. The prepared gradient surface was characterized by the measurement of water contact angle, Fourier-transform infrared spectroscopy in the attenuated total reflectance mode, and electron spectroscopy for chemical analysis.

  • PDF

표면개질에 의한 물방울 접촉각 변화를 이용하여 제작된 PDMS 마이크로 렌즈 (Fabrication method of PDMS microlensesusing water-based molding method)

  • 김홍기;윤광석
    • 센서학회지
    • /
    • 제17권5호
    • /
    • pp.375-379
    • /
    • 2008
  • This paper reports a new fabrication method of polydimethylsiloxane (PDMS) microlenses with various curvatures by using a water-based mold. The hydrophobic surface of Polypropylene (PP) substrate was modified by corona discharge using tesla coil to have hydrophilic surface. Then hydrophilic surface of PP substrate takes hydrophobic recovery to have various contact angles from less than $25^{\circ}$ to about $84^{\circ}$. By using the water droplets with various contact angles as replica molds for PDMS process, we could obtain PDMS microlenses with various curvatures.

유량측정 방법의 정확도 분석 -괴산댐 하류 달천 적용 사례를 중심으로- (Inter-comparison of Accuracy of Discharge Measurement Methods - A Case Study Performed in the Dalcheon River Downstream of the Goesan Dam-)

  • 이찬주;김동구;권성일;김원
    • 한국수자원학회논문집
    • /
    • 제43권12호
    • /
    • pp.1039-1050
    • /
    • 2010
  • 본 연구에서는 괴산댐 하류 달천에서 6가지 직접 유량 측정 방법-유속면적법, 봉부자법, ADCP이동측정법, ADCP정지 측정법, 전자파표면유속계, LSPIV-을 적용하고, 이를 댐 방류량 및 유속면적법과 비교함으로써 정확도를 상호 평가하였다. 이를 위해 2005년부터 2010년까지 실시된 총 39회의 유량측정결과가 분석되었다. 댐 방류량과의 비교 결과, 봉부자법을 제외한 나머지5가지 방법은 평균 6.2% 이내의 절대값오차를 나타냈다. 유속면적법과 다른 4가지방법을 비교할 경우, 전자파표면유속계는 7.35%, 나머지 3가지 방법은 6% 이내의 절대값오차를 나타냈다. 봉부자법은 댐 방류량 및 유속면적법과 비교하여도 오차의 범위가 크게 나타났는데, 이에 대해서는 추가적인 검증이 필요하다.

샌드댐 설치에 따른 물공급 개선 효과 예비 분석 (Preliminary Analysis on Improvement of Water Supply Capacity of Sand Dam)

  • 정일문;이정우
    • 대한토목학회논문집
    • /
    • 제41권1호
    • /
    • pp.29-37
    • /
    • 2021
  • 물공급 소외지역인 산간 최상류 지역을 위한 현지 적응형 물공급 체계의 도입이 필요하다. 이를 위해서는 수원의 확보와 최적이용 방안 및 연계 가능한 수원과의 결합이 관건이다. 특히 유역 최상류에 위치한 산간지역에는 계곡수와 복류수를 통해 공급되는 지하수 유출량을 활용하는 방안을 강구해야 한다. 본 연구에서는 강원도 춘천의 가뭄발생지역을 대상으로 샌드댐을 활용한 물공급 체계의 개선방안을 모색하였다. 방법은 기존 수원 하부에 모래저류조를 가상으로 설치하여 현재 취수량을 고려한 모델링을 수행하고 추가로 샌드댐에서 취수가능한 양을 산정하는 방식으로 분석을 수행하였다. 샌드댐을 기존 수원의 4배 크기로 적용한 경우 수면경사와 수리전도도의 변화에 따라 배수량이 크게 증대하는 것으로 나타났다.

자갈하천에서 연속적인 수위 자료를 이용한 경사면적법 유량 산정 -달천 사례연구- (Application of Slope-area Discharge Estimation Method using Continuously Observed Water Level Data in a Gravel Bed River -Case Study of the Dal Cheon River-)

  • 이찬주;김지성;김치영;김동구
    • 한국수자원학회논문집
    • /
    • 제41권5호
    • /
    • pp.503-515
    • /
    • 2008
  • 본 연구에서는 연속적인 수위 자료를 이용하여 경사면적법으로 유량을 산정하고 그 결과를 분석하였다. 대상 하천은 괴산댐 하류의 달천으로 여울과 웅덩이를 포함하는 약 960m의 구간이다. 하상 재료의 입경을 분석하였고 이를 이용하여 3가지 조도계수값을 산정하여 유량 계산에 활용하였으며, 추가로 하천정비기본계획의 조도계수도 사용되었다. 경사면적법으로 계산된 유량은 댐 방류량과 비교되었다. 댐 방류량과 비교한 상대오차는 조도계수에 큰 영향을 받는 것으로 나타났으며, 연구 대상 구간에 적절한 조도계수는 0.042 이상인 것으로 나타났다. 대상 구간의 평균하상 경사보다 완만한 수면경사를 갖는 계산 구간에서는 구간 전체의 조도계수보다 낮은 조도계수를 사용할 경우 유량 오차가 적었으며, 수면경사가 평균하상경사보다 급한 구간에서는 조도계수를 크게 사용하여야 상대오차가 감소하는 것으로 나타났다. 하도의 전체적인 하상경사를 고려하여 조도계수를 설정할 경우에는 수면경사가 완만한 구간과 급한 구간을 모두 포함하도록 전체 계산 구간을 설정하는 것이 적절한 것으로 나타났다. 500 cms 이상의 유량에서는 실측 유량과의 상대 오차가 일정해지므로, 비교 유량 측정이 이루어질 경우 조도계수를 검증한 후, 경사면적법을 적용함으로써 간접 유량측정 결과의 정확도를 높일 수 있을 것으로 판단된다.

Influence of operation of thermal and fast reactors of the Beloyarsk NPP on the radioecological situation in the cooling pond. Part 1: Surface water and bottom sediments

  • Panov, Aleksei;Trapeznikov, Alexander;Trapeznikova, Vera;Korzhavin, Alexander
    • Nuclear Engineering and Technology
    • /
    • 제54권8호
    • /
    • pp.3034-3042
    • /
    • 2022
  • The results of radioecological monitoring of the cooling pond Beloyarsk NPP (Russia) have been presented. The influence of waste technological waters of thermal and fast NPP reactors on the content of artificial radionuclides in surface waters and bottom sediments of the Beloyarsk reservoir has been studied. The long-term dynamics of the specific activity of 60Co, 90Sr, 137Cs and 3H in the main components of the freshwater ecosystem at different distances from the source of radionuclide discharge has been estimated. Critical radionuclides (60Co and 137Cs), routes of their entry and periods of maximum discharge of radioisotopes into the cooling pond have been determined. It is shown that the technology of electricity generation at Beloyarsk NPP, based on fast reactors, has a much smaller effect on the flow of artificial radionuclides into the freshwater ecosystem of the reservoir. During the entire period of monitoring studies, the decrease in the specific activity of radionuclides from NPP origin in surface waters was 4.3-74.5 times, in bottom sediments 10-505 times. The maximum discharge of artificial radionuclides into the reservoir was noted during the period of restoration and decontamination work aimed at eliminating emergencies at the AMB thermal reactors of the first stage of the Beloyarsk NPP.