• 한국태양에너지학회 논문집
• /
• 제35권3호
• /
• pp.73-79
• /
• 2015

In this study, a thermal storage performance and characteristics of daily operation were investigated when the air and the liquid were heated simultaneously by a hybrid solar air-water heater that can make hot water as well as heated air. The hybrid solar air-water heater is kind of a flat plate solar collector that can make hot water and heated air by installing air channel beneath absorber plate of traditional flat plate solar collector for hot water. As a result of daily operation, maximum water temperature reached in a thermal storage was shown $44^{\circ}C$ on 73kg/h of air mass flow rate and about $40^{\circ}C$ on 176kg/h of air mass flow rate. Thus, the necessity of heating water in thermal storage by operating only liquid side was confirmed when the temperature of liquid in thermal storage is lower than we need. In case of efficiency investigated on daily operation, the thermal efficiency of the liquid side was decreased with increment of the inlet liquid temperature and decrement of the solar radiation, but efficiency of the air side was increased with increment of inlet liquid temperature difference as the traditional solar air heater. Total thermal efficiency of the collector was shown from 65.85% to 78.23% and it was decreased with increment of the inlet liquid temperature and decrement of solar radiation same as the traditional system.

• 한국태양에너지학회 논문집
• /
• 제21권1호
• /
• pp.71-82
• /
• 2001

The heat transfer experiment in a latent heat storage tank as a solar energy storage system for the hot water supply was carried out. The latent heat storage tank was consisted of triple - tube type ; Outer shell for hot water from solar collector, PCM storage vessel in the middle of the tank and inside tube for hot water recovery. The heat storage tank has the dimension of 60 cm long and 34 cm outside diameter. Paraffin wax(m.p = 55.4C) and sodium acetate trihydrate(m.p = 58 C) were employed as the PCM this study. Experimental variables were inlet temperature and flow rate of the hot water for heat storage stage and cold water for heat recovery stage. Temperature profiles, heat transfer coefficient and the efficiency of heat storage$(Q/Q_{max})$ and heat recovery $(Q/Q_{max})$ were determined for the paraffin wax and inorganic salt respectively.

• 한국태양에너지학회 논문집
• /
• 제21권1호
• /
• pp.83-91
• /
• 2001

The heat transfer experiment in a pilot scale latent heat storage tank as a solar energy storage system for the hot water supply was carried out. The latent heat storage tank was consisted of three parts; Outer shell for hot water from solar collector, PCM storage vessel in the middle of the tank and immersed coil in the PCM vessel for hot water recovery. The heat storage tank has the dimension of 115 cm in height and 32 cm outside diameter. Paraffin wax (m.p = 55.4C) and sodium acetate trihydrate (m.p = 58 C) were employed as the PCM this study. Experimental variables were inlet temperature and flow rate of the hot water for heat storage stage and cold water for heat recovery stage. Temperature profiles, heat transfer coefficient and the efficiency of heat storage $(Q/Q_{max})$ and heat recovery $(Q/Q_{max})$ were determined for the paraffin wax and inorganic salt respectively.

• Journal of Radiation Protection and Research
• /
• 제36권4호
• /
• pp.174-182
• /
• 2011

With the reactor operation conditions - 4.3 wt% $^{235}U$ initial enrichment, burn-up 55,000 MWd/MTU, average power 34 MW/MTU for three periods burned time for 539.2 days per period and cooling time for 100 hours after shut down, to set up the condition to determine the minimum height (depth) of spent fuel storage pool to shut off the radiation out of the spent fuel storage pool and to store spent fuels safely, the dose rate on the specific position directed to the surface of spent fuel storage pool induced by the neutron and gamma-ray from spent fuels are evaluated. The length of spent fuel is 381 cm, and as the result of evaluation on each position from the top of spent fuel to the surface of spent fuel storage pool, it is difficult for neutrons from spent fuels to pass through the water layer of maximum 219 cm (600 cm from the floor of spent fuel storage pool) and 419 cm (800 cm from the floor of spent fuel storage pool) for gamma-ray. Therefore, neutron and gamma-ray from spent fuels can pass through below 419 cm (800 cm from the floor) water layer directed to the surface of spent fuel storage pool.

• Journal of Ginseng Research
• /
• 제18권1호
• /
• pp.60-65
• /
• 1994

Fresh ginseng of same grade was stored under the 4$\pm$1$^{\circ}C$ and 87~92% RH for 10 weeks. During the storage, an aliquot amount of the ginseng was drawn, freeze dried and chemical constituents and physicochemical parameters were measured. After 10 weeks of storage drying rate and shrinkage of ginseng were 1520% and 9.04%, respectively, mold growth was seen at week 5 and observed for 51.2% of the ginseng week 10. Amylase activity level was elevated at the early stage of storage and decreased to 5% of initial value at week 5. At week 5, the elevated amylase activity was inconcomitant with the appearance of the mold growth. Crude protein contents were increased and decreased, respectively 5 week post storage. No significant changes in crude fat, crude fiber, ash, total sugar, n-butanol extract and ginsenoside were observed. The content of water-extractable substance showed maximum at week 7 to 8. The value of pH was slightly elevated and reducing sugar was increased during the storage. Key words Ginseng storage, physicochemical properties, drying rate, shrinkage, amylase activity.

• 농업과학연구
• /
• 제47권4호
• /
• pp.1057-1069
• /
• 2020

For most upland crops in Korea, underground water is used to ensure an adequate water supply. Thus, surface water storage tanks are needed to supply surface water from reservoirs or streams. This study discusses the design, manufacture and monitoring of a water storage tank capable of reliably supplying water to crops and preventing the inflow of floating debris. The study was conducted in an apple orchard in Yesan-gun, Chungcheongnam-do in Korea. Based on the water requirements of the crops and size of the orchard, a required flow volume of about 0.6 ㎥·h-1 was determined, along with a surface water storage tank capacity of 1.2 ㎥. Following a comparison with other materials, stainless steel (STS) was used to construct the water tank. The tank was designed to provide 14 hours of irrigation, enabling a small-capacity, cost-efficient tank design to be used. A surface water irrigation test was performed using the surface water storage tank. The average surface water irrigation flow rate was 0.00045 ㎥·m-2·h-1. The water quality test showed that the pH, suspended solids (SS), total nitrogen (TN), and total phosphorus (TP) values satisfied the reference values for agricultural water. The test results showed that the surface water storage tank evaluated in this study allows for crop irrigation when there is a lack of groundwater during droughts.

• 한국식물병리학회지
• /
• 제10권2호
• /
• pp.144-147
• /
• 1994

About 450 phytopathogenic fungal cultures were stored in sterile distilled water ar room temperature by the sterile water storage method, which has been known as a simple, convenient, and long-term storage method of microorganisms. After 12 months, viability and pathogenicity of the stored isolates were tested. Among 205 tested, 175 isolates (84.5%) survived. Of these, Rhizoctonia solani, Botrytis cinerea, Pyricularia oryzae, Phytophthora infestans, and Sclerotinia sclerotiorum showed relatively lower survival rate; 92%, 74.1%, 62.5%, 45.8%, and 30%, respectively. Twenty seven isolates belonging to seven important phytopathogenic fungi were tested for pathogenicity, and all isolates tested maintained pathogenicity until at least 12 months after storage.

• 농업과학연구
• /
• 제35권2호
• /
• pp.225-235
• /
• 2008

만경강 수계의 봉동 지점에서 자연사회환경개선의 하천유지유량을 확보하기 위해 상류에 위치한 대아저수지를 높이는 방안에 대한 수문학적 타당성을 검토한 결과 다음과 같이 요약된다. 첫째, 동상-대아 직렬 연계에 의해 대아저수지로부터의 용수공급을 분석한 결과 용수공급량/유역면적은 1207.4 mm, 단위유역 용수공급량/강우량 비율은 95.8%, 용수공급량/유입량 비율은 153.1%, 용수공급량/저수량 비율은 236.1%, 유입량/저수량 비율은 200.6%였다. 둘째, 대아-경천 병렬 연계를 고려한 봉동 지점의 유량을 분석한 결과 유황은 연평균하여 풍수량 $28.95m^3/s$, 평수량 $2.00m^3/s$, 저수량 $0.95m^3/s$, 갈수량 $0.82m^3/s$로 분석되었으며, 고시유량 $1.32m^3/s$보다 $0.50m^3/s$ 적게 나타났다. 셋째, 대아저수지를 10m 높인 경우 대아저수지로부터의 용수공급을 분석한 결과 용수공급량/유역면적은 1220.7 mm, 단위유역 용수공급량/강우량 비율은 96.8%, 용수공급량/유입량 비율은 154.6%, 용수공급량/저수량 비율은 163.0%, 유입량/저수량 비율은 137.0%였다. 넷째, 대아저수지를 10m 높인 경우 대아-경천 병렬 연계를 고려한 봉동 지점의 유량을 분석한 결과 유황은 연평균하여 풍수량 $28.09m^3/s$, 평수량 $1.79m^3/s$, 저수량 $0.89m^3/s$, 갈수량 $0.82m^3/s$로 분석되어 유량증가 효과는 전혀 나타나지 않았다. 요약하면 대아저수지 용량을 증가시키더라도 용수공급의 증가효과는 전혀 나타나지 않았으며, 봉동지점의 고시유량을 확보하기 위한 대아 저수지의 숭상의 수문학적 타당성은 전혀 없는 것으로 분석되었다.

• 한국환경과학회지
• /
• 제24권6호
• /
• pp.721-729
• /
• 2015

Surface heat balance of the Gangjeong-Goryung Reservoir is analyzed for 12-17 August 2013. Each flux elements at the water surface is derived from the special field observations with application of an aerodynamical bulk method for the turbulent heat fluxes and empirical formulae for the radiation heat fluxes. The rate of heat storage in the reservoir is estimated by using estimated by surface heating rate and the vertical water temperature data. The flux divergence of heat transport is estimated as a residual. The features of the surface heat balance are almost decided by the latent heat flux and the solar radiation flux. On average for 12-17 August 2014 in the Gangjeong- Goryung Reservoir, if one defines the insolation at the water surface as 100 %, 94 % is absorbed in the reservoir; thereafter the reservoir loses about 30~50% by sensible heat, latent heat and net long-wave radiation. The residue of 50~80 % raises the water temperature in the reservoir or transported away by the river flow during the daytime.

• 농업과학연구
• /
• 제46권4호
• /
• pp.999-1006
• /
• 2019

Recently, the quantitative management of agricultural water supply, which is the main source for water consumption in Korea, has become more important due to the effective water management organization of the Korean government. In this study, the estimation method for irrigation supply based on agricultural reservoir storage data was improved compared to previous research, in which drought year selection was unclear, and the outlier data for the rainfall-irrigation supply were not eliminated in the regression analysis. In this study, the drought year was selected by the ratio of annual precipitation to mean annual precipitation and the storage rate observed before the start of irrigation. The outlier data for the rainfall-irrigation supply were eliminated by the Grubbs & Beck test. The proposed method was applied to nine agricultural reservoirs for validation. As a result, the ratio of annual precipitation to mean annual precipitation is less than 53% and the storage rate observed before the start of irrigation is less than 55% it was judged to be the drought year. In addition, the drought supply factor, K, was found to be 0.70 on average, showing closer results to the observed reservoir rates. This shows that water management at the real is appling drought year practice. It was shown that the performance of the proposed method was satisfactory with NSE (Nash-Sutcliffe model efficiency coefficient) and R² (coefficient of determiniation) except for a few cases.