• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.4
• /
• pp.325-330
• /
• 2000

Alginate obtained from brown algae had various physicochemical and rheological properties and could used as a dietary fiber, However, alginate has not been widely applied to the food industry, since it had high viscosity, high gelling effect conjugated with some mineral, and low solubility. To improve functionality of alginate, partially develymerized alginates, which was water-soluble dietary fiber were obtained by hydrolysis of alginate from the sea tangle, Laminaria japonicus, heated at $121^{\circ}C$. Effects of depolymerization of alginate on the changes of viscosity and average molecular weight, block composition ratio of mannuronate to guluronate (M/G ratio), chemical properties using $PT-IR, ^1H-NMR, and ^(13)C-NMR$ spectrum were investigated. The average molecular weight and viscosity of the alginate were rapidly decreased with the thermal decomposition, and estimated to be 1,307,415 dalton and 284,000 cps, before heating, 728,106 and 3,940.29 cps after 30 min heating, 102,635 and 22.22 cps after 2.5 hrs heating, 51,205 and 12.05 cps after 3 hrs, and 10,049 and 4.28 cps after 6.5 hrs, respectively. The M/G ratio was increased with the heating time, while MM-block did not show any changes and GG-block diminished. The results of $FT-IR, ^1H-NMR and ^(13)C-NMR$ spectrum suggested that changes of molecular structure did not occur by the thermal decomposition.

• Food Science of Animal Resources
• /
• v.23 no.3
• /
• pp.227-235
• /
• 2003

The results were obtained from pigs which had been fed finishing pig diets containing 5% beef tallow(C) as control and 2% perilla seed oil(Tl), 3% beef tallow and 2% squid viscera oil(T2), 3% beef tallow and 2% CLA(conjugated linoleic acid, T3). All porks were stored at 1$^{\circ}C$ for 28 days. pH value of control group was higher than other treatments. Water holding capacity(WHC) did not show any significant difference among treatments, however, WHC of C and T3 was increased as storage days increased. Protein solubility of T3 was higher than the other treatments, but that of all groups increased up to 14 days of storage and then decreased. The a* value of C was higher than the others, but b* value was low on 28 days of storage. Volatile base nitrogen(VBN) value of T3 showed the highest level, but that of Tl was the lowest. Thiobarbituric acid reactive substances(TBARS) of T2 and T3 were' higher than those of C and Tl. In sensory analysis, meat color and overall acceptability of C were higher than those of the other treatments in raw meat, and meat appearance was higher than level in Tl.

• Korean journal of food and cookery science
• /
• v.29 no.2
• /
• pp.129-135
• /
• 2013

The objective of this research was to investigate physicochemical properties of waxy sorghum flours by different milling methods (pin mill and ultra fine mill). Four different sorghum flours were used for the experiments ; PWS (pin milled whole sorghum flour), PS (pin milled sorghum flour without bran), UFWS (ultra fine milled whole sorghum flour), UFS (ultra fine milled sorghum flour without bran). The contents of crude ash and total dietary fiber were the highest in PWS. Amylose content of pin milled sorghum flour was higher than that of ultra fine milled flour. The mean particle size of pin milled flours was six times lager than ultra fine milled flours. The L values of UFS and UFWS were higher than those of PS and PWS, whereas a and b values were higher in PWS. The water binding capacity was highest in UFWS, and solubility was higher in PS and UFS. Swelling power of flours was highest in UFS. The damaged starch content was higher in PS and UFS, which means damaged starch of sorghum flours significantly affected by polishing than milling method. The pasting properties were higher in the pin milled flours. Initial pasting temperature of pin milled flour was ranging from 70.5 to $73.1^{\circ}C$, which are higher than ultra fine milled flour ($68.6^{\circ}C$). The contents of total polyphenol were higher in PWS and UFWS than those of PS and UFS, there was no difference between the two milling methods. The results of this study indicate that physicochemical properties of sorghum flour were affected by milling methods as well as bran.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.888-894
• /
• 1997

Two hulled and two hull-less barley varieties were investigated for ${\beta}-glucan$ enrichment. Hull-less barleys contained higher levels of total ${\beta}-glucan$ than hulled barleys, and were thus suitable as starting materials for preparing ${\beta}-glucan-rich$ fractions. Particularly, a waxy type (Suweon-291) of hull-less barley was found to have high soluble dietary fiber content containing primarily ${\beta}-glucan$, compared to the other non-waxy barley varieties. ${\beta}-Glucan$ content of barley during pearling process was measured, and the highest value was observed at the pearling yield of approximately $70{\sim}75%$. The pearled barley grains were ground and sieved to yield ${\beta}-Glucan$ enriched fractions containing up to 22% ${\beta}-glucan$. In the meanwhile, whole barley samples were directly milled by $B{\ddot{u}}hler$ mill to produce bran, shorts, break flour and reduction flour. ${\beta}-Glucan$ contents in the bran and shorts from the milled stream were relatively high, and further concentration of ${\beta}-glucan$ could be accomplished by successive sieving of the bran and shorts fractions. Pearled barley and milled stream could be used to prepare barley fractions with ${\beta}-glucan$ concentrations $2.4{\sim}3.1$ times those of the original barley grain. Water solubility of barley ${\beta}-glucan$ from pearled barley and the milled stream was in the range of $40{\sim}81%$.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.306-312
• /
• 1995

In order to know properties in rice starch during storage of rice, rice starch from stored rice(stored at $5^{\circ}C$, R.H. 65% and $30^{\circ}C$, R.H. 85%, for 16 weeks) used in this experiment. Water binding capacity of rice starch increased for 8 weeks, and then it decreased. As the storage period took longer, swelling power and solubility, optical transmittance, blue value, total amylose content and soluble amylose content decreased. For the same periods, changes in rice starch from stored rice$(30^{\circ}C$, R.H. 85%) were made more than those in rice starch at $5^{\circ}C$, R.H. 65%. The granule shape of rice starch, irrespective of storage periods and conditions, didn't make a significant difference. The relative crystallinity of the rice starch by X-ray diffraction didn't distinctly changed till the second week. But, at the fourth week, that by X-ray diffraction significantly decreased, and then slightly decreased. As the storage period took longer, gelatinization temperature, melting temperature and melting enthalpy measured by DSC got higher, but gelatinization enthalpy got lower. For the same storage period, gelatinization temperature, melting temperature, gelatinization enthalpy and melting enthalpy of rice starch stored at $30^{\circ}C$, R.H. 85% made changes more than those of rice starch stored at $5^{\circ}C$, R.H. 65% did.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.580-586
• /
• 1996

Gelatinization behavior and morphology of epichlorohydrin-crosslinked potato starches (XPs) were investigated. Native potato starch showed a very steep single stage swlling pattern, but crosslinked starches showed various patterns with the degree of crosslinking. Swelling power, solubility and light transmittance were reduced drastically as the degree of crosslinking increased. Brabender initial pasting temperature and peak temperature of crosslinked starches increased because the crosslinking reinforces the intermolecular net work of the starches. Although the swelling of the potato starch granule was inhibited by crosslinking as compared to that of the native one, Brabender peak viscosities (6.5% w/v, db) were on the order of 2,500 units for the native potato starch, 3,700 for the XP with 2.300 anhydroglucose units per crosslinking (AGU/CL) and 3,400 for the XP with 2,100 AGU/CL, due to the decreased breakdown of the swollen granule resulting from the resistance to heat and shear. The XP with 1,900 AGU/CL, however, did not show the peak viscosity and the viscosity was on the order of 500 units because of the excessive unhibition of the swelling. Unlike the native potato starch, 6.5%(m/v, db) pastes of the crosslinked potato starches could form gels, which could be predicted from the Brabender setback and consistency index. When the degree of crosslinking is low, random contraction and radial swelling of the granule was possible. As the degree of crosslinking increased, morphological change became similar to the single dimensional tangential swelling observed from the lenticular wheat starch. These morphological change during heating in excess water explained the gelatinization behaviors of crosslinked starches tested.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.504-510
• /
• 1992

Several single or mixed water-miscible organic solvent systems were investigated to develop the most effective solvent system for enzymatic synthesis of N-benzoylaspartame(BzAPM). The BzAPM was prepared by immobilized thermolysin with using N-benzoyl-L-aspartic acid(Bz-Asp) and L-phenylalanine methyl ester(PheOMe). The solubilities of BzAPM and L-phenylalanine were highest in 4.5% methanol(1.89 and 1.79%, respectively) among the solvents system investigated while a mixed solvent system of 25% dimethyl sulfoxide(DMSO) and 20% polyethylene glycol(PEG) 200 showed relatively high values. The synthetic activity of BzAPM as well as initial reaction rate were found to be high in 45% methanol, 45% DMSO and a mixed solvent of 25% DMSO and 20% PEM 200. The imobilized thermolysin was most stable in 25% DMSO and 20% PEG 200 during storage at $40^{\circ}C$ for 42 days. PheOMe in the same solvent system was also found fairly stable against non-enzymatic decomposition at $40^{\circ}C$. Based on the synthetic efficiency and stability, the solvent system containing 25% DMSO and 20% PEG 200 was selected to be appropriate for the enzymatic synthesis of BzAPM.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.441-452
• /
• 2011

This study was carried out to survey the residual characteristics of endocrine disruptor (ED)-suspected pesticides in greenhouse soils and assess their leachabilites to groundwater. Greenhouse soils were collected from 40 sites of greenhouse in 2008 in Korea. Sixteen ED-suspected pesticides which had been using in Korea, such as alachlor, benomyl, carbaryl, cypermethrin, 2,4-D, dicofol, endosulfan, fenvalerate, malathion, mancozeb, metribuzin, metiram, methomyl, parathion, trifluralin, and vinclozolin, in the soils, were analyzed by chromatographic methods using GLC-ECD and HPLC-DAD/FLD. Limits of detection (LODs) of the test pesticides ranged from 0.0004 to 0.005 mg/kg. Recoveries of the target pesticides from soil ranged from 72.69 to 115.28%. Four pesticides including cypermethrin were detected in the range of from 0.001 to 2.019 mg/kg, representing that their detection rate from greenhouse soils was 37.5%. The highest detection rate was observed from endosulfan which was detected from 16 site soils of the total samples, indicating that endosulfan is persistent in soil because of its very low mobility and high adsorption characteristics in soil. Based on the groundwater ubiquity scores (GUSs) of the pesticides detected from greenhouse soils, most of them have little possibilities of groundwater contamination except the fungicide vinclozolin with some leaching potential because of high water solubility and very low soil adsorption property.

• Korean Journal of Food Science and Technology
• /
• v.37 no.1
• /
• pp.142-146
• /
• 2005

Soy protein isolate (SPI) film was laminated with corn zein or wheat gluten to improve functional properties. Both SPI/corn zein-laminated film (Film B) and SPI/wheat gluten-laminated film (Film C) showed increased tensile strength by 150%, compared to control (Film A). Film C showed significant 253% increase in percentage elongation. Water vapor permeability (WVP) of Films B and C decreased slightly compared to Film A. Solubility values of Films B and C were lower than that of Film A. Hunter color values of Films A and C were not significantly different, while Film B showed yellowness due to presence of corn zein. These results suggest SPI/wheat gluten-laminated film is suitable as packaging material.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1300-1306
• /
• 2011

This study investigated the physicochemical characteristics of wet-milled rice flour treated with pectinase and cellulase in a steeping process. Enzyme treatments were used as follows: pectinase 0.05%, cellulase 0.05%, and mixed enzyme treatments 0.05~0.2%. For particle distribution, rice flour E-treated with mixed enzymes (pectinase 0.05% and cellulase 0.05%) was the finest at 48.3% particle distribution less than $53\;{\mu}m$. Protein contents and damaged starch were reduced by enzyme treatments. Damaged starch was the lowest (12.1%) in rice flour E compared with non-enzyme treatment (18.1%). Amylose content, water binding capacity, solubility, and swelling power all increased upon enzyme treatments, and their effects increased upon mixed enzyme treatment. For gelatinization characteristics of RVA, peak viscosity, final viscosity, breakdown, and total setback viscosity increased in rice flours treated with mixed enzymes. Especially, in steeping method with mixed enzyme treatment, pectinase 0.05% and cellulase 0.05% treatment was suitable for minimizing damaged starch and high fine particle distribution of rice flours compared with single enzyme treatment.