• 접착 및 계면
• /
• 제19권2호
• /
• pp.55-59
• /
• 2018

본 연구는 신발의 겉창인 고무 접착공정에서 버핑, 산, 알칼리 프라이머 전처리 공정을 생략하여 공정의 간소화로 생산 효율을 높이기 위해 수용성염을 포함하는 고무에 대한 접착특성과 기계적 특성을 고찰하였다. 산성염, 염기성염, 중성염을 평가한 결과, 염기성염을 포함된 고무 성형물의 경우 수성 접착제에 대해 우수한 접착효과를 보였다. 이는 염기성염이 하이드로옥시염으로 존재함에 따라 고무표면이 친수화 되면서 수성접착제에 우수한 접착효과를 보였다. 이것은 접촉각 및 IR측정으로 확인할 수 있었다. 또한, 염기성염이 포함된 고무 성형물의 경우 가교밀도가 증가되어 마모 특성 및 경도는 증가하지만 가교시간을 지연시키는 요인으로 작용하였다.

• 상하수도학회지
• /
• 제26권3호
• /
• pp.399-408
• /
• 2012

The overall goal of this study was to characterize and quantify ammonia-oxidizing bacteria (AOB) in four different full-scale sequence batch reactor (SBR) wastewater treatment plants. Also, this study focused on assessing the occurrence of the alternative ammonia-oxidizing microbes such as anammox (anaerobic ammonia oxidation) bacteria (AMX) and ammonia-oxidizing archaea (AOA) in these systems. Based on total AOB numbers and the estimated cell density in the mixed liquor samples, AOB constituted 0.3 - 1.8% of the total bacterial population in the four WWTPs. Based on clone library, Nitrosomonas ureae-like AOB were dominant in plant A and B, while plant C and D had Nitrosomonas nitrosa-like AOB as major AOB group. The four different AMX primer sets targeting AMX 16S rRNA gene produced PCR amplicons distantly related to Chlamydia and Planctomycetales group bacteria. However, it was not clear these groups of bacteria perform anammox reaction in the SBR plants. Also, molecular evidence of AOA was found in one of the SBR plants, with a sequence located in the deep branch of the sediment creanarchaeota group.

• Corrosion Science and Technology
• /
• 제10권3호
• /
• pp.80-86
• /
• 2011

Welding was widely used in shipbuilding industries as a joining method. In present study, the effects of welding fume contaminated on steel surface on corrosion protection were examined by water ballast simulation test and condensation chamber test. Pull-off adhesion test, blistering test and cathodic disbondment test were carried out to evaluate the effects of residual welding fume. Consequently, it was clearly indicated that the residual welding fume didn't affect the corrosion protection of epoxy coated on steel when surface was treated by light sweep blasting to heavy sweep blasting which was applied in this study.

• Corrosion Science and Technology
• /
• 제6권5호
• /
• pp.239-244
• /
• 2007

Corrosion protection of automotive steels has traditionally been assured by using a zinc phosphate metal pretreatment followed by the deposition of a cathodic electrocoat system. This system has been developed and optimized over the years into a highly robust and dependable system with a high performance. However, in terms of efficiency and use of resources and energy, the need is now felt to develop a simpler system with fewer steps, shorter lines, less energy requirements (curing and e-coat deposition) and less stringent waste disposal requirement (phosphate sludge). We report here on the development of a one-step system that can possibly replace both the zinc phosphate and the e-coating processes. Such a system is based on the so-called superprimer concept that we have recently developed for the replacement of chromate pretreatment and chromate-containing primers in the aerospace industry. With some modifications, such systems can also be adapted for use in the automotive industry.

• 접착 및 계면
• /
• 제19권2호
• /
• pp.84-94
• /
• 2018

Electrically debonding adhesives[EDA], one of the controlled delamination materials[CDM] is reviewed. CDM can be defined as the ability to separate adhesive bonded assemblies without causing damage to the substrates. Its application includes electronics, medical surgery, dentistry, building and general manufacturing where the opportunity to separate assemblies is important. There are several important mechanisms of EDAs; faradaic reaction, phase separation and anode detachment, cathodic debonding, gas emission mechanism, and mechanical stresses. These mechanisms are reviewed with various research results. Since the mechanism behind the electrochemical debonding of adhesives is not well understood, this review aims to help the research scientists in the industries. Finally, new applications of EDA are introduced as new business opportunity.

• 미생물학회지
• /
• 제37권1호
• /
• pp.72-79
• /
• 2001

폐수 처리장의 방류수에 페놀을 첨가한 후 terminal restriction fragment length polymorphism (T-RFLP) 방법을 이용하여 세균군집의 구조와 변화를 조사하였다. 시료로부터 얻은 16S rRNA gene은 eubacterial primer로 증폭하였으며, 한 primer는 5'말단에 biotin을 부착하였다. 증폭된 product는 HaeIII와 AluI으로 각각 절단하였고, 절단된 단편 중에서 terminal restriction fragment (T-RF)를 streptavidin paramagnetic particle을 이용하여 분리하였다. 분리된 T-RF는 전기영동과 silver staining을 통하여 확인하였다. 본 실험의 유용성을 검증하기 위하여 표준 균주 10 균주를 대상으로 실험하였고, 균주마다 특징적인 T-RF를 가지는 것과 그 크기가 Ribosomal database project (RDP) 자료로부터 계산된 결과와 일치하는 것을 확인할 수 있었다. 한편, 대조군으로 사용된 페놀을 첨가하지 않은 방류수 시료에서는 Acinetobacter, Bacillus, Pseudomonas 속 등이 우점종을 차지하고 있었고, 페놀 (최종농도 250mg.$l^{-1}$)을 첨가한 방류수 시료에서는 Acinetobacter, Comamonas, Cytophaga, Pseudomonas 속 등이 우점종을 차지함을 알 수 있었다. Gel에서 분리한 Acinetobacter와 Cytophaga에 해당되는 T-RF는 재증폭 및 염기 서열 분석이 가능하였는데, database의 염기서열과 비교한 결과 Acinetobacter junii와 유연관계가 가깝다는 것을 확인하였다.

• 현장농수산연구지
• /
• 제3권1호
• /
• pp.48-69
• /
• 2001

1997년 부터 한국농업전문학교에서 수집하여 재배되고 있는 마 (Dioscorea alata L.) 계통 중 품질이 우수하고 이용 가치가 기대되는 33개 계통에 대한 특성을 조사하였으며, 형태적 차이를 보이는 19개 계통에 대한 RAPD분석을 실시하였다. 1. 주당 괴경의 전체 무게는 최대 2,147g (No.36), 최소 90g (No.20)으로 평균 610g이었다. 주당 평균 괴경수는 2.8개였으며 최대 4.7개, 최소 1.3개였다. 괴경중은 평균 363g이었으며 최대 1200g, 최소 70g이었다. 2. 괴경의 육질은 백색, 담황색 및 적자색 3가지 패턴을 보였으며, 잎은 녹색, 진녹색 및 담녹색으로 분류되었다. 3. RAPD 분석에 사용된 총 113개 primers 중 12개 primer 만이 모든 분류군에서 증폭되었다. 이를 통하여 93개의 밴드를 얻었으며 69개 밴드는(71.0%) polymorphic 하게 나타났다. 4. 유집분석 결과 19개 계통은 유사도 지수 값 0.66~0.90의 범위로 나타났으며, 크게 2개의 그룹, 즉 인도네시아와 가고시마에서 도입된 8개의 계통이 포함된 그룹과, 유사도지수 0.70~0.90의 범위를 갖는 Nauru, Palau Is., Okinawa와 Papua New Guinea에서 도입된 11 계통이 포함된 그룹으로 대별되었다.

• Journal of Microbiology and Biotechnology
• /
• 제22권9호
• /
• pp.1193-1201
• /
• 2012

The analysis and quantification of ammonia-oxidizing bacteria (AOB) is crucial, as they initiate the biological removal of ammonia-nitrogen from sewage. Previous methods for analyzing the microbial community structure, which involve the plating of samples or culture media over agar plates, have been inadequate because many microorganisms found in a sewage plant are unculturable. In this study, to exclusively detect AOB, the analysis was carried out via denaturing gradient gel electrophoresis using a primer specific to the amoA gene, which is one of the functional genes known as ammonia monooxygenase. An AOB consortium (S1 sample) that could oxidize an unprecedented 100% of ammonia in 24 h was obtained from sewage sludge. In addition, real-time PCR was used to quantify the AOB. Results of the microbial community analysis in terms of carbon utilization ability of samples showed that the aeration tank water sample (S2), influent water sample (S3), and effluent water sample (S4) used all the 31 substrates considered, whereas the AOB consortium (S1) used only Tween 80, D-galacturonic acid, itaconic acid, D-malic acid, and $_L$-serine after 192 h. The largest concentration of AOB was detected in S1 ($7.6{\times}10^6copies/{\mu}l$), followed by S2 ($3.2{\times}10^6copies/{\mu}l$), S4 ($2.8{\times}10^6copies/{\mu}l$), and S3 ($2.4{\times}10^6copies/{\mu}l$).

• 상하수도학회지
• /
• 제26권4호
• /
• pp.591-598
• /
• 2012

Denitrification is an important biological mechanism in wastewater treatment process because this process is technically to remove nitrogen from water to air. There have been lots of study about denitrification engineering and molecular biological research about denitrifying bacteria, respectively. However, combination of these researches was unusual and rare. This study is about the correlation between quantity of denitrifying bacteria and denitrification potential, and consists of NUR batch test as analysis method of denitrification potential and quantitative molecular analysis for denitrifying bacteria. Three reactors (A/O, MLE and A/O of nitrogen deficiency) are operated to get activated sludge with various denitrification potential. All samples which were acquired from reactors were measured denitrification potential by NUR test and NUiR test. Also, Real-time PCR was conducted for quantification of denitrifying bacteria composition in activated sludge. The various denitrification potentials were measured in the reactors. The denitrifiaction potential was the highest in MLE process and the reactor of the nitrogen deficiency showed the lowest. Genomic DNA of activated sludge was obtained and consequently, real-time PCRuse the primer sets of nirK and nirS　were conducted to quantify genes involving denitrification reductase production. As the result of real-time PCR, nirK gene showed more significant influence on denitrification potential comapred with nirS gene.

• 접착 및 계면
• /
• 제18권2호
• /
• pp.53-58
• /
• 2017

본 연구는 신발의 겉창용 고무 접착공정에서 버핑, 고무 프라이머 처리 등 전처리 공정을 생략하여 공정의 간소화로 생산효율을 높이기 위하여 $MgCl_2$가 포함된 고무 성형물에 대한 접착특성과 기계적 특성을 고찰하였다. $MgCl_2$함량 별로 평가한 결과, $MgCl_2$가 포함된 고무 성형물의 경우 수성 접착제에 대해 우수한 접착효과를 보였다. 이는 $MgCl_2$가 물에 녹는 염 인 것을 감안했을 때 일어나는 현상이라 판단했고, 접촉각 과 표면분석 측정으로 결과를 확인하였다. 또한, $MgCl_2$가 포함된 고무 성형물의 경우 가교효율이 증가되어 마모 특성이 증가하는 현상을 볼 수 있었다.