• 한국해안·해양공학회논문집
• /
• 제21권6호
• /
• pp.453-461
• /
• 2009

새만금 방조제 건설 이후 새로운 갯벌 생성이 보고되고 있는 1호 방조제 앞 대항리 갯벌의 지형 변화에 대한 영상 관측을 수행하였다. 갯벌 지역은 이동상의 어려움과 밀/썰물에 따른 시간상의 제약으로 국지 혹은 소수 기선의 현장 관측만으로 제한되는 경우가 많다. 본 연구에서는 밀물시 조간대 갯벌에서 이동하는 수륙 경계선은 간조와 만조 정선 사이의 등고선을 나타낸다는 자연적인 원리를 이용하여 연속 촬영된 영상에서 관측된 수륙 경계선에 대한 실제 공간 좌표를 계산하고 이를 모두 통합함으로서 조간대 지형에 대한 3차원 지형정보를 획득하였다. 2005년 9월부터 2009년 9월까지 6차례의 영상 관측 결과를 분석한 결과 1호 방조제 외측 갯벌은 매년 평균 0.127 m 씩 퇴적된 것으로 나타났으며 공간적 및 시간적으로 다양한 변화를 보였다.

• 조명전기설비학회논문지
• /
• 제17권6호
• /
• pp.77-82
• /
• 2003

본 논문에서는 강한 불평등전계를 형성시킬 수 있는 다선형전극을 강전해수 발생장치내에 설치하여 전계집중효과에 의해 발생되는 기포내의 선행방전의 형태와 기포방전이 수소이온농도와 산화환원전위반응에 미치는 영향을 검토하고자 하였다. 실험결과, 강전해수 발생장치내의 양전극측을 다선형으로 함으로써 양전극측에서 발생되는 기포내에서 비유전율 차이에 의한 기포내의 선행방전을 관찰할 수 있었다. 그리고 기포방전에 의해 발생된 이온들이 강전해수 발생장치내에 용해됨으로써 전해수의 이온농도를 증가시켰다. 이때 발생된 고농도의 이온들을 분리집속 시키고 산화환원작용을 크게 증가시켜 고농도의 강전해수를 발생시킬 수 있었다.

• Current Research on Agriculture and Life Sciences
• /
• 제15권
• /
• pp.93-100
• /
• 1997

4종(種)의 상치를 공시작물(供試作物)로 하여 수분(水分) 스트레스에 노출(露出)을 시켰을 때 총(總) 단백질(蛋白質)의 함량(含量)은 Flooding 처리시 그 감소율(減少率)이 더 크게 나타났으며 감소율(減少率)은 JCM이 가장 컸고, DCM이 가장 작았으며 품종간(品種間) 각 처리별(處理別) 차이(差異)가 크게나타났다. 총(總) 지질(脂質)의 함량(含量)은 감소율(減少率)이 CCM이 가장 컸고 JCM, DCM, DJM순(順)으로 감소(減少)하였다. 항산화효소(抗酸化酵素)인 Superoxide Dismutase(SOD)는 Catalase, Ascorbate Peroxidase의 활성도(活性度)는 전체적으로 감소(減少)하였으며 그 감소율(減少率)은 Catalase의 경우 처리별 JCM이 가장 크게 나타났고 DCM, DJM에서는 Flooding 처리시 효소의 활성도 변화가 더 크게 나타났다. Calatase의 활성도(活性度) 변화(變化)가 Ascorbate peroxidase의 활성도(活性度) 보다 감소율(減少率)이 더 크게 나타나 이는 Catalase가 Ascorbate peroxidase 보다 과산화수소(過酸化水素)와 더 직접적(直接的)으로 반응(反應)을 함을 나타낸다. Drought 처리기간별(處理期間別) 효소(酵素)의 활성도(活性度)는 생육시간(生育時間)이 길어질수록 감소(減少)하는 경향(傾向)이었으며 Catalase의 활성도(活性度)가 4일째 이후 가장 급격하게 감소(減少)하였다.

• 한국식품저장유통학회지
• /
• 제24권4호
• /
• pp.505-509
• /
• 2017

Water vapor adsorption kinetics of vacuum-dried jujube powder were investigated in temperature and relative humidity ranges of 10 to $40^{\circ}C$ and 32 to 75%, respectively. Water vapor was initially adsorbed rapidly and then reached equilibrium condition slowly. Reaction rate constant for water vapor adsorption of vacuum-dried jujube powder increased with an increase in temperature. The temperature dependency of water activity followed the Clausius-Clapeyron equation. The net isosteric heat of sorption increased with an increase in water activity. Good straight lines were obtained with plotting of $1/(m-m_0)$ vs. 1/t. It was found that water vapor adsorption kinetics of vacuum-dried jujube powder was accurately described by a simple empirical model, and temperature dependency of the reaction rate constant followed the Arrhenius-type equation. The activation energy ranged from 50.90 to 56.00 kJ/mol depending on relative humidity. Arrhenius kinetic parameters ($E_a$ and $k_0$) for water vapor adsorption by vacuum-dried jujube powder showed an effect between the parameters with the isokinetic temperature of 302.51 K. The information on water vapor adsorption kinetics of vacuum-dried jujube powder can be used to establish the optimum condition for storage and processing of jujube.

• Structural Engineering and Mechanics
• /
• 제25권5호
• /
• pp.565-576
• /
• 2007

The article describes a technique for the measurement of the level of complexity of fracture surfaces by the method of vertical sections, and a performed statistical analysis of the effect of profile lines on the fractographic and fractal parameters of fractures, i.e. the profile line development factor, $R_L$, and the fracture surface development factor, $R_S$, (as defined by the cycloid method), as well as the fractal dimension, $D_C$, (as determined by the chord method), and the fractal dimension, $D_{BC}$, (as determined by the box method). The above-mentioned parameters were determined for fracture surfaces of basalt and gravel concretes, respectively, which had previously been subjected to fracture toughness tests. The concretes were made from mixtures of a water/cement ratio ranging from 0.41 to 0.61 and with a variable fraction of coarse aggregate to fine aggregate, $C_{agg.}/F_{agg.}$, in the range from 1.5 to 3.5. Basalt and gravel aggregate of a fraction to maximum 16 mm were used to the tests. Based on the performed analysis it has been established that the necessary number of concrete fracture profile lines, which assures the reliability of obtained testing results, should amount to 12.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.632-640
• /
• 2019

Desalination plant ships have been recently regarded as one of the probable solutions for drought seasons in many countries. Because desalination plants should be mounted on the desalination ships and special purpose storages such as salty waste water tanks are necessary, onboard and compartment arrangements would be distinguished from those of other conventional commercial ships. This paper introduces some basic design procedure including resistance/propulsion and seakeeping performances. The ship lines were improved step by step after modification of the ship lines and verification of resistance/propulsion performances using computational fluid dynamics (CFD). After finalization of the ship lines, the seakeeping performance was also evaluated to check motion behaviors and drive wave-induced loads such as the wave shear force and bending moment. It was proved that the predicted long-term vertical wave shear force and bending moment were significantly less than the rule-based ones, thus it is expected that the deliverables of this study will reduce the construction cost of desalination plant ships.

• 천문학회보
• /
• 제38권2호
• /
• pp.64.1-64.1
• /
• 2013

High energy photons and mechanical energy produced by the process of star formation result in copious FIR molecular and atomic lines, which are important coolants of the system. Photons thermally or mechanically induced could dissociate water in the dense envelope to change relative abundances among the species O, OH, and H2O. Here we analyze OH emission lines toward embedded young stellar objects (YSOs) observed as part of the Herschel open time key program, 'Dust, Ice, and Gas In Time (DIGIT)' in order to study the physical conditions of associated gas and the energy budget loaded on the OH line emission. According to our analysis of the Herschel/PACS spectra, OH emission peaks at the central spaxel in most of sources, but several sources show spatially extended emission structures. In the extended emission sources, the distribution of OH emission is correlated with that of [OI] emission and extended along the outflow directions. Considering the diversity of source properties, ratios between detected OH lines are relatively constant among sources. In addition, each OH line has strong correlation with bolometric luminosity. For detail analyses with rotation diagram and non-LTE LVG model, we present the results from GSS30-IRS1 and Elias29.

• 대한한방내과학회지
• /
• 제25권2호
• /
• pp.214-223
• /
• 2004

The study examines the anti-cancer effects of the hot water extract of Mylabris phalerata(MP) using SNU-C5 cell lines. Microscopic analysis showed that 12 hours after MP treatment, the number of dead cells increased prominently. Significant cell death was observed 12, 24, and 48 hours after MP treatment through trypan blue exclusion testing. This suggests that MP is time-dependently cytotoxic. Mitotracker Red CMXRos staining and flowcytometry revealed that MP decreased mitochondrial membrane potentials. The absence of peaks on PI staining showed that DNA damage occurred in MP treated cells. Taken together, measurements suggest that MP has a strong anti-cancer effect on SNU-5 cell lines, and that this is likely to be due to the destruction of mitochondria and DNA damage.

• International Journal of Ocean System Engineering
• /
• 제3권4호
• /
• pp.175-187
• /
• 2013

Moonpools are vertical wells in a floating body used onboard many types of vessels like Exploration and drilling vessels, Production barges, Cable-laying vessels, Rock dumping vessels, Research and offshore support vessels. Moonpool gives passage to underwater activities for different types of ships as per their mission requirements. It is observed that inside a moonpool considerable relative motions may occur, depending on shape, depth of the moonpool and on the frequency range of the waves to which the ship is exposed. The vessel responses are entirely different in zero and non-zero Froude number. Former situation is paid attention in this study as the mission requirement of the platform is to be in the particular location for long period of operation. It is well known that there are two modes of responses depending on the shape of the moonpool viz., piston mode for square shape and sloshing mode for rectangular shapes with different aspect ratios of opening like 1:1.5 and 1:2 ratios. Circular shaped moonpool is also tested for measuring the responses. The vessel moored using heavy lines are modelled and tested in the wave basin. The pretensions of the lines are varied by altering the touchdown points and the dynamic tensions on the lines are measured. The different modes of oscillations of water column are measured using wave gauge and the vessel response at a particular situation is determined. RAOs calculated for various situations provide better insight to the designer.

• Ocean Systems Engineering
• /
• 제3권2호
• /
• pp.137-147
• /
• 2013

Moonpools are vertical wells in a floating body used onboard many types of vessels like cable-laying vessels and offshore support vessels. Moonpool gives passage to underwater activities for different types of ships as per their mission requirements. It is observed that inside a moonpool considerable relative motions may occur, depending on shape, depth of the moonpool and on the frequency range of the waves to which the ship is exposed. The vessel responses are entirely different in zero and non-zero Froude number. Former situation is paid attention in this study as the mission requirement of the platform is to be in the particular location for long period of operation. It is well known that there are two modes of responses depending on the shape of the moonpool viz., piston mode for square shape and sloshing mode for rectangular shapes with different aspect ratios of opening like 1:1.5 and 1:2 ratios. Circular shaped moonpool is also tested for measuring the responses. The vessel moored using heavy lines are modeled and tested in the wave basin. The moored lines are provided with pre-tension and the dynamic tensions on the lines are measured. The different modes of oscillations of water column are measured using wave gauge and the vessel response at a particular situation is determined. RAOs determined for various situations provide better insight to the designer. The experiments done in the wave basin may also be compared with a software package meant for handling moored floating bodies.