• The Korean Journal of Mycology
• /
• v.25 no.4 s.83
• /
• pp.257-267
• /
• 1997

Fruit bodies similar to the Phellinus sp. residing on the mulberry were collected at Yang-yang in Kang-won-do province and one strain of Phellinus sp. was isolated from the fruit bodies. For mass production of the isolated mycelia in a submerged culture, the culture conditions, medium composition, and the effect of various culture systems on the mycelial growth, were investigated. The morphological characteristics of the fruit body were as follows: covered with blackish to black and rough, lower surface with yellowish-brown to dull-brown and smooth, 5-7 cm thick and hard woody. Also, the pure cultured mycelia showed yellowish-brown color, capability of purplish-brown pigment production on the PDA plate media, no-formation of clamp-connection, much binding branch, and enzyme activities such as laccase, tyrosinase and peroxidase. Therefore, pure cultured strain was identified to be Phellinus sp. In the flask culture, the optimum culture conditions for the mycelial production were obtained after cultivation of 8 days at inoculum level of 5%(v/v), media volume of 70 mL, 150 rpm, initial pH 6, and temperature of $30^{\circ}C$. Optimum medium composition from the response surface analysis were determined to be glucose 12.12 g/L, sucrose 12.12 g/L, yeast extract 11.15 g/L, malt extract 11.15 g/L, $KH_2PO_4$ 0.855 g/L and $CaCl_2$ 0.855 g/L. The production of the mycelia after 4 and 8 days of cultivation was 1.95 and 9.89 g/L, respectively. The maximum specific growth rate and productivity were $0.020\;hr^{-1}$ and 1.25 g/L/day, respectively. Among the three different culture systems for the growth of mycelia, the maximum mycelial dry weight of 7.5 g/L was obtained after cultivation of 4 days in the air-lift fermentor under aeration rate of 2.5 vvm. The maximum specific growth rate and productivity were $0.033\;hr^{-1}$ and 1.9 g/L/day, respectively, which were about 1.7 and 4.2 times higher than those of flask culture.

• Food Science and Preservation
• /
• v.17 no.3
• /
• pp.398-404
• /
• 2010

It is known that onions, or bioactive compounds therein, providehealth benefits. The present study was designed to investigate whether a concentrated onion extract lowered blood lipid levels in rats fed a high-fat diet. Initially, male Sprague-Dawley rats were housed singly in an environment in which temperature and light duration were controlled, and had free access to a nutritionally adequate AIN-93G diet and deionized water. After an acclimatization period, rats were weight-matched and assigned to one of the following five groups: 1) a control group, fed the AIN-93G diet mixed with 10% (w/v) lard and 0.7% (w/v) cholesterol to induce hyperlipidemia (control); 2) three experimental groups, fed the AIN-93G diet mixed with a high-fat source plus concentrated onion extract at three different levels (termed the low-dose, medium-dose, and high-dose groups); and, 3) a placebo group, fed the AIN-93G diet with fats plus the same concentrated extract but devoid of onion-derived material. All five groups freely ingested their respective diets over 6 weeks. At 0, 3, and 6 weeks, blood samples were collected from the orbital sinus following overnight food deprivation. At 6 weeks, livers were collected. Both control and experimental groups continually gained body weight throughout the study. No significant differencein body weight gain was observed among groups. However, the serum concentrations of triglycerides, total cholesterol, and non HDL-cholesterol were significantly reduced by ingestion of concentrated onion extract. Also, the hepatic levels of total lipids and total fatty acids, especially C18:1 (oleic acid), were significantly decreased in rats fed a high level of concentrated onion extract, compared with the control and placebo groups. These results provide clear evidence that ingestion of a concentrated onion extract has a profound inhibitory effect on serum lipid levels in rats fed a high-fat diet. Our findings indicate that a concentrated onion extract may be used to alleviate hyperlipidemia by lowering serum cholesterol and triglyceride levels.

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.277-285
• /
• 2010

The objective of this study was to manufacture spent layer chicken meat products by natural freeze-drying. The spent layers of chickens that were slaughtered at 80 wk were obtained from a local slaughter house and separated into two halves of carcasses. The samples were divided into the following groups: 1) control (non-curing), 2) curing, and 3) curing with 2% trehalose before drying. The cured meats were placed at $2^{\circ}C$ for 7 d and then transferred to a natural drying spot located in Injae City, Gangwondo, Korea. The experiment was conducted from January to March in 2008. The average temperature, RH, and wind speed were $-1.5^{\circ}C$, 63%, and 1.8 m/sec, respectively. The cured treatments showed higher pH, lower Aw and lower shear force value compared with the control. Based on the results of TBARS (2-thiobarbituric acid reactive substances) level and volatile basic nitrogen value, lipid oxidation and protein deterioration were inhibited in curing treatments during drying. Trehalose acted as a humectant because it maintained a lower water activity despite the relatively higher moisture content during drying. The polyunsaturated fatty acids content and sensory attributes were higher in cured treatments than in the control during drying. Most of the bacterial counts in the treated groups were lower by 2 Log CFU/g after 1 mon of drying, and Salmonella spp. and Listeria spp. were not found in any treatment. There was also no microbial safety problem associated with dried meat products. Based on the results of this experiment, dried meat products could be manufactured from precured spent layer chickens by natural freeze-drying during winter.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.727-743
• /
• 1996

To know the floristic composition, vortical distribution and community structure of marine benthic algae inhabiting in the intertidal and subtidal zones of Yongil Bay, east coast of Korea, the study has performed using the quadrat method along a transect line from July, 1995 to June, 1996. In this area, a total of 144 species including 2 new red algae to Korea was found: 5 blue-green, 18 green, 20 brown and 101 red algae. The representative species throughout the year were Ulva pertusa, Gelidium amansii and Symphyocladia latiuscula. Dominant species were Sargassum thunbergii in spring, U. pertusa in summer and autumn. In winter, Chondrus ocellatus and Monostroma grevillei occurred dominantly. The standing crop exhibited mean value as $185.8g/m^2$ dry weight. Maximum value was recorded in spring $(267.3g/m^2)$ and minimum was observed in winter $(93.7g/m^2)$. Shannon's species diversity (H') and evenness (J') as maximum value were recorded in spring, whereas minimum values were shown in winter. Vertical distribution, rerognized by cluster analysis based on relative coverage of the species, could be divided into two or three algal groups except spring. In general, green algae (M. grevillei, Capsosiphon fulvescens, U. pefusa, Enteromorpha compressa) and brown algae (Sargassum fulvellum, S. thunbergii) were represented in the upper and middle zone and red algae (G. amansii, C. ocellatus, S. latiuscula, Crateloupia okamurae, Pachymeniopsis eilliptica) in the lower zone. The algal community varied according to season and environmental conditions. Particularly, seasonal variation of vortical distribution seemed to be affected primarily by water temperature. Also seasonal tidal level and tolerance of algal species to desiccation appeared to be associated with it in this area.

• Progress in Medical Physics
• /
• v.16 no.1
• /
• pp.16-23
• /
• 2005

The objective of this study was to construct multi-element ultrasound applicators for the treatment of gynecologic cancer with high dose rate brachytherapy. For the treatment of uterus, piezo-ceramic crystal transducer (PZT -5A) with outer diameter of 4 mm, wall thickness of 1.3 mm, and length of 24.5 mm was selected. For the treatment of cervix or vagina, it should be possible to insert the applicator into the vagina. Thus, a cylindrical PZT -8 material with outer diameter of 24.5 mm, wall thickness of 1.3 mm, and length of 15.2 mm was selected. The operating frequencies determined by vector impedance measurement were 3.2 MHz for the PZT 5A cylinder (OD=4 mm) and 1.7 MHz for the PZT -8 cylinder (OD: 24.5 mm). The ratios of generated acoustic output power to applied electric power were 33% and 61% for the tandem type crystal and the cylinder type crystal, respectively. The radiated acoustic pressure fields from both transducers were calculated using a Matlab code and measured in water using hydrophone. There was good agreement between measured and calculated acoustic pressure field distribution. For a tandem type transducer, the calculated acoustic pressure field decreased from 0.023 MPa at 10 mm to 0.010 Mpa at 30 mm, the reduction of 57%. For the cylinder type transducer which will be used for the treatment of vagina showed 78% reduction at 15 mm and 66% at 25 mm as compared to values at 5 mm from the surface. Based on the characteristics of the transducers, this study demonstrated the possibility of using the crystals as a heating source. Finally, a 3-element and 4-element prototype applicators were constructed. The 3-element applicator is 75 mm long and 4 mm thick and will be used for the treatment of uterus. The 4-element applicator is 61 mm long and 24.5 mm thick and will be used for the treatment of vagina. Using these applicators, it is possible to generate enough power to increase temperature to therapeutic level.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.6
• /
• pp.1022-1031
• /
• 2008

Pound cakes were prepared with Citrus mandarin powder(CMP) cultivated in JeJu Island, Korea. The impact of CMP amount level, which was incorporated into wheat flour by the ration of 0, 5, 10, 15, and 20% based on a flour weight, on the rheology and sensory profile of the pound cakes was measured. Moisture content of 13.70%, crude protein 5.12%, crude lipid 1.30%, crud ash 1.92%, respectively. Also evaluation was performed on the changes in physicochemical properties of the pound cakes during storage at 4 and $30^{\circ}C$. According to the amylogram, gelatinization temperature of the control dough was $63.35^{\circ}C$ and those of the dough with CMP were $63.85{\sim}66.55^{\circ}C$. Maximum viscosity of the dough was 686 B.U in the control, those were 575 B.U, 553 B.U, 504 B.U and 401 B.U in the dough with 5, 10, 15, and 20% CMP, respectively. The retrogradation degree(setback value) of CMP dough was $31{\sim}57%$ lower than that of the control dough under the same conditions. Water holding capacity of pound cake was increased gradually in proportion to the amount of CMP. The CMP addition decreased the brightuess(L) of pound cakes but increased redness(a) and yellowness(b). Hardness of pound cakes was significantly increased by CMP addition, while springiness, adhesiveness and cohesiveness were decreased. Based on sensory evaluation, pound cakes added with CMP were not significantly different in color and texture, while that of 10% CMP was significantly high in taste, flavor, and overall preferences, compared to the control. pH of pound cake with CMP was decreased during storage, showing that pH of CMP samples was lower than the control. Titrated acidity of pound cake with CMP was increased rapidly from storage for 10 days, which the changes in degree was fast in accordance with CMP amount. The Hunter's color value of pound cake with CMP was decreased, as the storage time proceeded. In the samples prepared with CMP, the firmness, adhesiveness, gumminess and chewiness was increased as the storage time proceeded, while springiness and cohesiveness was decreased.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.1
• /
• pp.6-13
• /
• 1986

Experiments were conducted to study the effects of formic acid on the quality of the rye silages at the different dry matter content (19.2, 28.6 and 32.2%) and different formic acid addition levels (0.00, 0.24, 0.48 and 0.71%). Rye were taken at vegetative stage (plant height 40cm) on November 29, 1984. Herbage were adjusted dry matter contents by wilting. Materials were ensiled in small polyethelene film bag after addition planned formic acid, and stored under room temperature. The results obtained are as follows: 1. In the visual observation of silage quality by addition of formic acid in unwilted silage show more clear brownish-yellow color and sweet flavor and less acidity compared with untreated formic acid. 2. The pH values of the silage increased by increasing DM content. At lower dry matter contents in materials the pH values decreased with increased formic acid levels. At higher dry matter content silage, however, non significant difference were observed. 3. The formation of total organic acid decreased by increasing DM content in the materials, and there appeared a significant difference (P<01) among formic acid levels. The organic acid contents in silage decreased with higher formic acid levels. 4. The water soluble carbohydrate in silage increased by increasing DM content. And it was also increased (P<01) with increased formic acid addition level. 5. The production of NH_3 - N decreased (P<01) with increasing the addition of formic acid, and decreased by increasing DM content in materials. 6. The in vitro dry matter digestibility of silages showed not difference among dry matter contents of the materials but at 0.71% addition of formic acid in unwilted silages appeared higher (P<05) digestibility compared the others (0.00% and 0.24%).

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.841-849
• /
• 1996

Quality changes in carrot during storage were studied to investigate the efficiency, cooling properties and the washing and storage effects of hydrocooling method. As a result of plotting the nondimensionalized carrot temperature versus cooling time, its cooling rate coefficient was shown $-0.0171min^{-1}{\sim}-0.0121min^{-1}\;(R^{2}=0.99{\sim}0.95)$, and $-0.141min^{-1}{\sim}-0.0038min^{-1}\;(R^{2}=0.98{\sim}0.92)$ in package condition7. Rate of weight loss and change in moisture content of carrot were not significantly different by treatment conditions during storage at $5^{\circ}C$. During storage at $15^{\circ}C$, however, weight loss of hydrocooled carrot was lower than that of non-treated carrot from the 30th to 40th day. Especially, PE was more effective than tray for packaging hydrocooled carrots. Carrot pretreated wish sterilizing agent, packed with PE vinyl film and with residual water removed after hydrocooling showed a lower decaying-rate than any other carrots. Changes in Hunter L and b values of hydrocooled carrot were slower than those of non-treated one. The carotenoids contents of stored carrot $(0.736{\sim}0.780mg%)$ decreased to $9{\sim}43%$ after 40 days of storage at $5^{\circ}C$ and before 20 days of storage at $15^{\circ}C$. It could be presumed that the addition of sterilizing agent reduced the initial level of overall microbial and coliform counts and their growth rate during storage.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel, undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesiodistally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference in fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even if that portion consists of mainly enamel and a little dentin structure.

• Korean Journal of Poultry Science
• /
• v.16 no.3
• /
• pp.149-156
• /
• 1989

Two broiler experiments were carried out to determine whether supplementation of zeolite in the diet would affect broiler performance and economical efficiency. Day old male broiler chickens of Abor Acres strain were used. In the first experiment,60 birds were distributed into f groups of 10 birds each. Three groups of chickens were randomly placed on one of the following single-stage (0-6wks) experimental diets； control diet (non-supplemented) or 2% zeolite supplemented diet (supplemented to the control). In the second experiment,216 birds were distributed into 24 groups of 9 birds each. Eight groups of chickens were randomly placed on one of the 3 two-stage diet (starter；0-4wks, finisher；5-7wks)；control diet ($T_1$ , non-supplemented), 2% zeolite diet ($T_2$：isocaloric and isonitrogenous as $T_1$ ) and 2% zeolite supplemented diet ($T_3$, supplemented to the control). Birds were housed in the batteries, and feeds and water were fed ad libitum. The results of Experiment 1 showed that birds fed control diet were heavier than those fed 2% zeolite supplemented diet up to 4th wks of age. However, birds fed the latter grew more at 5th and 6th wk. Overall weight gain, feed intake and feed efficiency were not significantly different. The results of Experiment 2 showed that there were no significant differences in weight gains, feed intakes and feed efficiencies among treatments during starter, finisher to overall period. The moisture levels in excreta of the birds were significantly (P＜0.01) less when zeolite was included in the diets and those in excreta significantly (P ＜ 0.01) increased as the ambient temperature increased. Economical efficiency expressed in fed cost (won) required per kg weight gin were 346.55 (T$_3$),348.34 ($T_1$ ) and 359.85 ($T_2$).