• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.2
• /
• pp.73-77
• /
• 2003

This study focuses on illustrating the effect of a hill on current filed at a channel, and the topographic effects of the hill were studied with various numerical experiments. The model experiments showed that stratification as well as bottom topography had influence on current fields around the hill. Due to stratification effect, Karman vortex formed behind the hill by bottom topography made effects on water movement only in the deep layer. The vortex reduced density field around the hill which resulted in the stratification in the water column, and which also resulted in the movement of isopycnic surface to deep layer both in front and back of the hill. The water in the back of the hill moved upward along ispycnic surface afterward. From these effects, velocity pattern in vertical direction around the hill showed opposite direction, downwrad in front of the hill and upward in the back. However, the upward flows did not seem to have any significant influence on the water conditions in the surface layer, even though strong upward flows were found on both side of the hill.

• Corrosion Science and Technology
• /
• v.19 no.4
• /
• pp.196-202
• /
• 2020

The air vent connected to a heat supply pipeline in the district heating system has been used to eliminate the existing air in the pipe, which has a detrimental effect on corrosion durability and heat efficiency. Recently, the air vent installed under a manhole for 22 years was corroded and several pinholes were detected in the front-end of the air vent. To identify the cause of the failure, thickness reduction, corrosion products, and water quality were examined. The corrosion damage was significant at the outside of the front-end of the air vent where the insulator was covered. While a thin oxide layer was formed in the interior of the tube, the coarse and porous corrosion products consisting of magnetite and hematite were found externally. Water flowing into the thermal insulator was absorbed by the insulator following hydrolysis. The hydrolyzed insulator ejected the corrosion factors such as Cl^-, SO₄^2-, and NH₄⁺. The findings suggest that the corrosion under insulation due to rain water is the main cause of the underlying failure in the air vent.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.332-332
• /
• 2023

농업용 저수지는 농촌유역의 홍수조절에 핵심적인 역할을 하지만 기본적인 기능은 이수 기능이기 때문에 농업용수 수량을 충분하게 확보하면서 동시에 홍수에도 대비할 수 있도록 저수지를 적절히 운영하는 것이 중요하다. 이에 농업용 저수지마다 홍수기 제한수위를 설정하여 홍수조절용량과 농업용수를 적절하게 확보하도록 하고 있으나, 현재 홍수기 제한수위는 저수지별 특성을 고려하지 않고 70% 정도의 저수율 기준이 일괄적으로 적용된 경우가 대부분이며 시기별 농업용수공급 특성을 고려하지 못한다. 이에 본 연구에서는 농업용 저수지의 이수안전도 및 치수안전도를 이용하여 이·치수 기능을 모두 고려한 홍수기 제한수위 설정 방안을 제시하였다. 홍수기 제한수위는 초기 (6/21~7/20), 중기 (7/21~8/20), 후기 (8/21~9/20)에 대해 각각 설정하였고, 오봉저수지와 묘곡저수지에 대해 1973~2022년의 기상자료를 이용하여 이·치수를 모의하였다. 관개기 최저저수량 및 이듬해 4월의 저수량을 기준으로 이수안전도를 산정하고, 재현기간 100년/200년/500년 홍수에 대해 저수지 운영을 모의하여 최고저수량을 기준으로 치수안전도를 산정하였다. 초기/중기/후기 제한수위 조합에 대한 이수안전도 및 치수안전도 값을 좌표공간에 점으로 도시하고 Pareto front를 도시하여 최적의 제한수위 범위를 도출하였다. 분석 결과, 오봉저수지의 이수안전도는 후기 제한수위에 의해 대부분 결정되며, 초기/중기 제한수위는 큰 영향을 주지 못하는 것으로 나타났다. 반면 묘곡저수지의 이수안전도는 초기 제한수위에 의해 크게 영향을 받으며, 그 영향이 이듬해까지 이어지는 것으로 나타났다. 이를 토대로 최적의 제한수위를 도출한 결과, 오봉저수지의 경우 초기 65%, 중기 65~80%, 후기 95% (유효저수량에 대한 비율)로 시기별 수문 운영이 필요한 것으로 나타났고, 묘곡저수지의 경우 초기 100%, 중기 95%, 후기 65~80%로 취수 구조물 또는 비상수문 설치를 통한 방류가 필요한 것으로 나타났다. 본 연구에서 제시한 방법을 통해 저수지별 특성을 고려하여 홍수기 제한수위를 설정함으로써 효율적인 저수지 운영이 가능할 것으로 기대된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.887-893
• /
• 2010

Role of the perforated pipe is to drain the water with equal pressure and velocity through the holes of perforated pipe. The perforated pipe is being used in many processes of water treatment system, however, the design parameter of perforated pipe is not standardized in korea. In this study, we have found the design parameter of perforated pipe in the water treatment system using the Computational Fluid Dynamics (CFD). The uniformity of outflow from the perforated pipe is directly affected according to area ratio (gross area of holes/surface area of the perforated pipe). In other words, the uniformity of outflow is improved as area ratio is smaller. Also, at the same area ratio, the uniformity of outflow is improved as number of holes is increase. Specially, in case of the two holes per length of pipe diameter (2/D) shows the most uniformity of outflow and the best hydraulic with the smaller pressure drop. When the inlet velocity of pipe is about 0.06m/sec, the flux of pipe has decreased as from front to backward. When the inlet velocity is 3 m/s, the flux of pipe has increased as from front to backward.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.5
• /
• pp.708-715
• /
• 1998

The shelter effect of a porous wind fence on a triangular prism was experimentally investigated in a circulating water channel. A porous fence of porosity .epsilon.=38.5% was installed in front of the prism model. The fence and prism model were embedded in a turbulent boundary layer. The instantaneous velocity fields around the fence and prism model were measured by using the instantaneous velocity fields around the fence and prism model were measured by using the 2-frame PTV(Particle Tracking Velocimetry) system. By installing the fence in front of the prism, the recirculation flow region decreases compared with that of no fence case. The porous fence also decreases the mean velocity, turbulent intensity and turbulent kinetic energy around the prism. Especially, at the top of the prism, the turbulent kinetic energy is about half of that without the fence.

• Journal of the korean society of oceanography
• /
• v.33 no.1-2
• /
• pp.28-34
• /
• 1998

Variations in abundance, size and population structure of Calanus sinicus were studied in the southern waters of Korea in connection with hydrographic conditions during 1991-1992. Abundance was high in April and low in August. This species was concentrated inshore of a coastal temperature front, or around the temperature front in April. The 1st-3rd copepodites dominated in February and April, and adults in August. The mean population stages in February and April were younger than those in other survey months. This suggests that this species mainly reproduced during winter-early spring. In prosome length, the 1st-4th copepodites were larger in April than in other survey months, and the 5th copepodite and adult were the largest in February. Mean prosome length of C. sinicus showed weak inverse relationship with sea water temperature, but it was not statistically evidenced.

• Korean Journal of Microbiology
• /
• v.28 no.3
• /
• pp.188-191
• /
• 1990

The streptococcal plasmid pAM$\beta_{1}$ (erythromycin resistance)was transferred via conjugation from Streptococcus faecalis DS 5 to Lactobacillus casei YIT 9018 by a filter mating method. The transfer frequency depended greatly on the type, pore size and side(front or back) of membrane filter. Water passing through a membrane under reduced pressure induced very tight contact between the cells, increased the transconjugation frequency about 1.3 to 37-fold when Millipore membrane filter (0.45.$\mu$m, front side up) was used.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.240-247
• /
• 2013

Purpose: This study was conducted to develop a rubber-crawler type vehicle as a traveling device for harvesting water-dropwort cultivated in water contained paddy rice field in winter season. Methods: A commercial rubber-crawler type vehicle was used to investigate application of rubber crawler to the paddy rice field as preliminary test. As the result of the preliminary test, a both prototype traveling device with rubber crawlers for a water-dropwort harvest was designed with inclination of $45^{\circ}$ at the front-end and rear-end of crawler under the basic water depth of 0.6 m in the paddy rice field. The device was fabricated and attached to the experimental harvesting test devices on the front of the prototype vehicle. The size of the prototype crawler vehicle with a harvesting part is $2,800{\times}1,460{\times}1,040 $ (mm) ($L{\times}W{\times}H$) with weight of 9.21 kN (maximum). Sizes of the crawler of prototype vehicle are ground contact length of 900 mm, width of 180 mm, height of 1,070 mm and distance between center to center of crawlers of 720 mm. The side-overturn angle of the prototype was $26.4^{\circ}$. Results: Driving performance of the prototype vehicle in water contained paddy field were good at both forward and reverse (backward) directions as weights were applied. The drawbar pull and the maximum sinking depth of the prototype vehicle were 3.5 kN and 0.13 m respectively at water depth of 0.5 m, when the weight and bearing capacity of the prototype rubber crawler in the paddy field were 8.51 kN and 26.3 $kN/m^2$, respectively. Conclusions: Results of the driving test performance of the prototype crawler in paddy rice field at the water depth of 0.5 m were satisfactory. The prototype had enough drawbar pull and driving ability in the deep water contained paddy field.

• Food Science of Animal Resources
• /
• v.28 no.3
• /
• pp.312-318
• /
• 2008

The objective of this study was to investigate the changes in ice dendrite size during freezing process in gelatin matrix as a model food system in order to provide mathematical relation between freezing condition and ice dendrite size. Gelatin gel as a model matrix was frozen in unidirectional Neumann's type of heat transfer. The thermograms' analysis allowed to determine the freezing temperature of the sample, the position of the freezing front versus time, and thus, freezing front rate. The morphology of ice dendrites was observed by scanning electron microscopy after freeze-drying. We observed that the means size of ice dendrite increased with the distance to the cooling plate; however, it decreased with the cooling rate and the cooling temperature. In addition, the shorter durations of the freeze-drying process was shorter decreeing the decreased the freezing front rate, resulted in their resulting in a larger pore size of the ice dendrite pores for the sublimation channel of that operate as water vapor sublimation channels. From these results, we could derive a linear regression as an empirical mathematical model equation between the ice dendrite size and the inverse of freezing front rate.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.6
• /
• pp.63-70
• /
• 2012

The authors discuss the effect of hydraulic conductivity on the suction profile and stability of a typical cut-slope subjected to low intensity rainfall. The initial suction value above the ground table in the unsaturated zone is assumed to be 15 kPa. The uncoupled approach of finite element and limit equilibrium method is used to evaluate the stability of the cut-slope at different elapsed times of rainfall. The finite element seepage analysis shows that the soil in the unsaturated zone always remains unsaturated during the course of low intensity rainfall. Furthermore, the slope stability remains practically unchanged so long as the wetting front remains in the unsaturated zone but it decreases noticeably when the wetting front reaches and elevates the ground water table level.