• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.519-526
• /
• 2005

Hydrolysis of soda-lime waste glass was investigated to test the feasibility for use of waste glass as feed material in the production of foamed glass. The soda-lime glass, such as plate glass and various bottle glasses, was effectively hydrolyzed by steam and water under high pressure. The proper condition for the hydrolysis was found to be reaction temperature of $250^{\circ}C$ and reaction time of 2 h. Under this condition, the water content of hydrated glass through hydrolysis was 7.85~10.04%, allowing successful foaming process for production of foamed glass. Using Na as the modifying agent of glass was effective in the hydrolysis by water. The highest water content of hydrated glass was obtained when weight ratio of NaOH to the glass was 0.04.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.5
• /
• pp.199-205
• /
• 2018

A geopolymer was produced from coal ash generated from an integrated gasification combined cycle (IGCC) plant and its water resistance was evaluated. For this purpose, the geopolymer specimens were immersed in water for 30 days to measure changes in microstructure and alkalinity of the immersion liquid. Particularly, the experiment was carried out with foaming status of the geopolymers and parameters of room temperature aging condition, and immersion time. The foamed geopolymer containing 0.1 wt% Si-sludge had pores with a diameter of 1 to 3 mm and exhibited excellent foamability. Also, the calcium-silicate-hydrate crystal phase appeared in the foamed geopolymer. In the geopolymer immersion experiment, the pH of the immersion liquid increased with time, because the un-reacted alkali activator remained was dissolved in the immersion liquid. From the pH change of the immersion liquid, it was found that geopolymer reaction in the foamed specimen was completed faster than the non-foamed specimen. Through this study, it was possible to successfully produce foamed and non-foamed geopolymers recycled from IGCC coal ash. Also the necessary data for the safe application of IGCC coal ash-based geopolymers to areas where water resistance is needed were established; for example, the process conditions for room temperature aging time, effect of foaming status, immersion time and so on.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.48 no.2
• /
• pp.86-97
• /
• 2024

Alkaline- or salt-assisted extractions have been widely used to extract edible insect proteins, however, there is a need for extraction techniques that balance cost-efficient production as well as preserving the protein properties. Mealworm proteins (Tenebrio molitor larvae) were extracted using three different extraction methods-alkali (AMP), salt (SMP), and water (WMP)-and then physicochemical and techno-functional properties were examined. AMP had high yield, protein, and amino acid contents, whereas WMP had high moisture, ash, and fat contents. SDS-PAGE showed a wide range of molecular weights in WMP whereas mostly low molecular weights were observed in AMP and SMP. AMP had poor protein solubilities compared to SMP and WMP across all pHs. AMP had enhanced water-holding capacity and emulsion stability, whereas WMP had improved oil-holding capacity and foaming properties. WMP formed a gel with and without the transglutaminase. The physicochemical and techno-functional properties demonstrated that water-soluble mealworm protein was superior to alkali-and salt-soluble mealworm proteins. Considering the cost efficiency and minimal impact on the environment as well, a cold press juicer could be utilized for mass production of mealworm protein compared to the conventional methods of protein extraction using alkali and salt.

• Korean Journal of Food Science and Technology
• /
• v.20 no.5
• /
• pp.625-630
• /
• 1988

Phosphorylation of soy protein by sodium trimetaphosphate and acetylation of soy protein by acetic anhydride were performed. Then, the functional properties of modified soy proteins were compared with that of unmodified soy protein. Isolated soy protein prepared from defatted soybean flake had protein content of 92.7% as moisture-free basis. The phosphorylated soy protein showed higher solubility, foaming properties, and water holding capacity than unmodified soy protein. Acetylation of soy protein increased emulsification activity and foaming properties greatly, whereas decreased the solubility at pH 8.0. Isoelectric pHs of phosphorylated and acetylated soy protein were shifted to acidic regions(pH 3.0 and pH 4.0) from pH 5.0, which was the isoelectric pH of unmodified soy protein. Soy protein seems to be aggregated during phosphorylation and acetylation procedure, judging form Sepharose CL-4B gel filtration profiles. The modified soy proteins showed increased mobilities to anode direction in disc-gel electrophoresis.

• Applied Biological Chemistry
• /
• v.41 no.1
• /
• pp.13-17
• /
• 1998

To improve extraction of insoluble proteins and functional properties of abolished proteins by protease. It was found that the optimum pH, optimum temperature, optimum treatment time and optimum unit of enzyme far extraction of protein were pH 9.0, $60^{\circ}C$, 8 hrs, 40 units. The foaming capacity and foaming satbility of sesame meal protein after treatment of enzyme were especially higher than control. The emulsion capacity and emulsion satbility of sesame meal protein were higher than control. Coil absorption as well as water absorption capacities of sesame meal protein were higher than control.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.2
• /
• pp.77-81
• /
• 1998

Surface active properties of these aqueous Gemini surfactant solutions including surface tension, critical micelle concentration(cmc), foaming power, foam stability, emulsifying power and Krafft point were measured at given conditions. They showed excellent properties, being compared with conventional single-chain surfactants such as sodium dodecyl sulfonate(SDS). Their surface tensions in the aqueous solutions were decreased to $30{\sim}38$ mN/m, which is lower than 39 mN/m of SDS, and their cmc values evaluated by surface tension method were $2.8{\times}10^{-5}{\sim}3.3{\times}10^{-4}$ mol/L. These values were also much lower than that of SDS, $9.8{\times}10^{-3}$ mol/L. The foaming power and foam stability, especially decyl and dodecyl compounds, were good and the emulsifying power in benzene or soybean oil was also excellent. All of the synthesized Gemini surfactants possessed good water solubility and their Krafft points were all below $0^{\circ}C$. As results, DDED and DDOD, Gemini surfactants which were synthesized are expected to be applied as foamers, emulsifiers and so on.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.1
• /
• pp.15-20
• /
• 2005

$Na_2CO_3$. Sodium orthosilicate (Na-OSi), Tetronix T-701 (T-701), Na-dioctyl sulfosuccinate (303C), Newpol PE-68 (PE-68), MJU-100A, and tetrasodium pyrophosphate were blended to prepare high performance alkaline cleaning agents (ACASs). The results of cleaning test with steel specimen showed that ACAS-6 ($Na_2CO_3$ 50g/Na-OSi 35g/T-701 20g/303C 18g/PE-68 17g/MJU-100A 10g/TSPP 20g/ water 180g mixture) had a good cleaning power. The cleaning power for press-rust preventing oil was 98% and 99% degreasing at 4wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively ; for quenching oil, the cleaning power of ACAS-6 was 91% degreasing at 4wt% and $70^{\circ}C$. The foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 6wt%, $60^{\circ}C$ were 18mm and 65mm, respectively. It was concluded that ACAS-6 had a good low foaming cleaning agent.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.924-930
• /
• 1999

To extract insoluble proteins and improve physical properties of proteins, the sesame meal proteins was irradiated with $5\;kGy{\sim}20\;kGy$ at room temperature. The highest extraction rate of sesame meal protein was showed at irradiation dose of 5 kGy. The foaming capacity, foaming stability, emulsion capacity and emulsion stability of gamma irradiated sesame meal protein (GISP) were all increased as compared to those of the non-irradiated protein. Water absorption capacity of GISP was similar to that of non-irradiated protein and oil absorption capacity of GISP was decreased after treatment by gamma irradiation.

• Applied Biological Chemistry
• /
• v.49 no.4
• /
• pp.304-308
• /
• 2006

To extract insoluble proteins from silkworm pupa meal, the meal was treated with pretense produced by Bacillus sp. JH-209. The extraction of insoluble silkworm pupa protein was enhanced at alkaline pHs ranged from 7 to 11 by treatment with the protease. The optimum extraction temperature was $40^{\circ}C$ for in soluble protein treated with pretense. The optimum protease treatment time for extraction of protein was 11 hrs and optimum amount of enzyme treated for extraction of protein was 60 Unit, respectively. The treatment of enzyme extracted more protein than ordinary extraction method without pretense. The foaming capacity, foaming stability, emulsion capacity, and emulsion stability of silkworm pupa meal protein extracted by the treatment of the enzymes increased at all pH ranges. Further more oil absorption as well as water absorption capacities of the protein extracted by the treatment of the enzymes were also increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.1
• /
• pp.57-63
• /
• 2000

To extract insoluble proteins from abolished soybean meal, the meal was treatesd with phytase and protease produced by Aspergillus sp. SM-15 and Aspergillus sp. MS-18. The extraction of insoluble soybean protein was increased at alkaline range more than pH 5 in case of phytase, pH 7 to 11 in case of protease and pH 5 to 12 in case of the mixed enzyme of phytase and protease. The optimum extraction temperature of insoluble protein was 5$0^{\circ}C$ for phytase and the mixed enzyme of phytase and protease, and 6$0^{\circ}C$ for protease. The optimum treatment time for extraction of protein was 9 hrs for phytase, 11 hrs for protease and the mixed enzyme of phytase and protease and optimum unit of enzyme for extraction of protein was 600 unit, 40 unit and 900 unit＋60 unit in case of phytase, protease, phytase and protease, respectively. The treatment of mixed enzyme showed higher extracton rate of protein than single enzyme treatment. The foaming capacity, foaming stability, emulsion capacity, and emulsion stability of soybean meal protein by the treatment of the enzymes increased at all pH range. Further more oil absorption as well as water absorption capacities by the treatment of the enzymes were also increased. The functional properteis of the soybean meal protein treated by the mixed enzyme were higher than those of soybean meal protein treated by the single enzyme.