• 제목/요약/키워드: water discharge measurement

검색결과 257건 처리시간 0.051초

4불화탄소 플라즈마처리에 의한 폴리에스테르 직물의 발수가공 (Water Repellent Finish of Polyester Fabric Using Carbontetrafluoride Plasma Treatment)

  • 모상영;이용운;김태년;천태일
    • 한국염색가공학회지
    • /
    • 제6권3호
    • /
    • pp.27-36
    • /
    • 1994
  • In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.

  • PDF

경사각을 갖는 적층판식 유수분리기의 유수분리 효율에 관한 연구 (A Study on the Oil/Water Separation Efficiency of Laminated Plate Type Oily water Separator with Inclined Angle)

  • 한원희;김준효;최민선
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제25권2호
    • /
    • pp.365-374
    • /
    • 2001
  • Its a tendency to strengthen related international was as the importance on marine oil pollution recently becomes the issue. According to the regulation of IMO, oil discharge from ships is allowed under 15PPM only and oil filtering equipment is essential. Oily water separator of laminated plate type which is one of gravity type separator can be use as assistant equipment for the oil filtering system to meet the present IMO standard, because it fits well to process large amount of rich oil with high specific gravity. The purpose of this paper is to investigate an efficiency of oil/water separation with the characteristics of laminated plate arrangement. The analyse of oil contents for oil-water mixture were carried out in order to find an efficiency of oil/water separation and an experimental study was simultaneously carried out to investigate internal flow characteristics of separator by visualization method and PIV(Particle Image Velocimetry) measurement at three spaces of plates for 5, 10 and 15 mm with variation of inlet flow rates of $0.25m^3$/h and $0.5m^3$/h. The experimental results showed that the space of the plates acts a significant role in the separating process.

  • PDF

하천 수위-유량곡선식 개선 및 모형개발 (Stage-Discharge Rating Curve Model Development and Modification)

  • 장기환;이재형
    • 한국수자원학회논문집
    • /
    • 제38권4호
    • /
    • pp.271-280
    • /
    • 2005
  • 본 연구의 목적은 기존 수위-유량곡선식에 내재되어 있던 발산과 처리 불능문제를 해결하기 위한 새로운 형태의 관계식($Q=p(h-e)^{\beta}-{\gamma}$)을 제안하고 그러한 수위-유량곡선식 산정모형을 개발하였다. 발산 문제는 영유량 수위 매개변수 e를 찾고 추정된 식의 총오차 값을 최소화하는 동안 승수 매개변수 ${\beta}$가 비정상적으로 커지는 것이다. 불능 문제는 e값이 계측 최소수위 이상의 값일 때 (h - e)값이 음수가 되어 로그값을 취하는 것이 불가능하다는 것이다. 이상의 두 가지 문제는 제어변수 ${\gamma}$를 도입함으로서, ${\beta}$를 감소시키는 효과와 "0" 이상으로 (h - e)를 제어할 수 있게 되었다. 본 연구에서는 물리적 분석과 민감도 분석을 통하여 수위-유량곡선식에서 매개변수 ${\gamma}$의 영향이 e 의 영향과 거의 같음을 보였다. 또한 개발된 WinCARD 시스템은 모든 수위국의 수문분석에 사용되는 기존 수위-유랑곡선식의 적합도를 평가하고, 하천유량 산정을 위한 신규 수위-유량곡선식을 작성하는데 활용될 수 있다.

이상기후대비 노후저수지 홍수 대응을 위한 사전방류 기술개발 및 평가 (Development and assessment of pre-release discharge technology for response to flood on deteriorated reservoirs dealing with abnormal weather events)

  • 문수진;정창삼;최병한;김승욱;장대원
    • 한국수자원학회논문집
    • /
    • 제56권11호
    • /
    • pp.775-784
    • /
    • 2023
  • 최근 이상기후로 수공 구조물의 설계빈도를 상회하는 극한호우의 증가 경향이 뚜렷함에 따라 과거에 설계된 농업용 저수지의 안전성 검토가 필요하다. 그러나 한국농어촌공사 관할 일정 규모 이상의 저수지를 제외한 지자체 관리 저수지는 비상시 긴급 방류가 가능 저수지는 전무하다(13,685개소). 이러한 경우 이동식 사이펀을 현장에 빠르게 투입하여 사전 방류하는 방법이 긴요하며, 본 연구에서는 사전 및 긴급방류 기능을 동시에 수행할 수 있는 직경 200 mm, 최소 수위차 6 m, 420(m2/h), 10,000(m2/day)의 이동식 사이펀을 경주시 유금저수지를 대상으로 적용 가능성을 평가하였다. 테스트베드인 유금 저수지는 1945년 준공되어 공용기간이 78년 정도 경과한 시설물로 수문학적 안정성 분석 결과 현재 댐마루 구간의 최저높이는 27.15(EL.m)로 검토 홍수위 27.44(EL.m) 보다 0.29 m 낮아 제방을 통한 월류 가능성이 있고 여유고도 1.72 m 부족한 것으로 나타나 수문학 안전성을 확보하지 못하는 것으로 검토되었다. 유금저수지는 수위-유량 계측이 주기적으로 이루어진지 얼마 되지 않아 저수지의 수위-유량 관계 곡선식을 명확하게 확립하기 어려워 수위-용적 곡선을 임의로 도출하였으며 도출된 곡선을 기반으로 중소규모 노후저수지 운영 알고리즘을 통해 사전방류시간, 여수로 방류량을 고려하고 빈도별 홍수량에 따른 저수지 월류시간을 예측함으로써 사전에 대피 시간을 확보하고 붕괴위험을 저감할 수 있는 기술을 확보하였다. 직경 200 mm 이동식사이펀 1열 기준, 30년 빈도 홍수량 유입 시 상한수위 기준 80% 수준(약 30,000 m2)을 유지하면서 주민대피 시간(약 1시간)을 확보할 수 있는 최적 사전방류시간은 12시간 이전으로 분석되었다. 중소규모 노후저수지를 대상으로 사이펀 활용 사전방류기술 및 저수지 운영 알고리즘에 따라 이상기후 대비 사전에 방류를 시행하고 관리자의 의사결정을 돕는다면, 저수지 붕괴 위험지역 내의 주민들의 안전을 확보하고 주민대피 지원체계 구축을 통해 주민들의 불안감 해소, 저수지 위험상황 시 위험회피 수단 제공으로 위험요소 감소가 충분히 가능하다.

2중판 오리피스를 이용한 기액 2상유량계의 개발 (Development of a 9as-liquid two-phase flowmeter using double orifice plates)

  • 이상천;이상무;남상철
    • 설비공학논문집
    • /
    • 제10권5호
    • /
    • pp.619-629
    • /
    • 1998
  • An experimental work was conducted to investigate a feasibility of simultaneous measurement of gas-liquid two-phase flowrates with double orifice plates using air and water. The tests were carried out under the atmospheric pressure and at the ambient temperature using two different tube sizes. Qualities of an air-water flow in the present study have values less than 0.1 and thus the mixed flow showed bubbly, plug, slug flow regimes. The probability density function (PDF) and the power spectral density function (PSDF) of the instantaneous pressure drop traces for the flow regimes were obtained. It is found that some distinctive features exist in the distribution of these functions, depending upon the two-phase flow pattern. The time-averaged value of the instantaneous pressure drop increases with increasing gas and liquid flowrates, showing a single-valued function for the total mass flowrate and the quality. It is also found that the two-phase discharge coefficient exhibits a consistent trend for variation of dimensionless parameters such as the superficial velocity ratio and the gas Reynolds number. The results indicate that simultaneous measurement of two-phase flowrate may be possible based upon a statistical analysis of the instantaneous pressure drop curves monitored using double orifice plates.

  • PDF

원통 아크릴 수조로 주입된 고온 기포의 수면 배출 온도 측정에 관한 실험적 연구 (An Experimental Study on the Measurement of Water Surface Discharge Temperature of High-Temperature Bubble Injected into Cylindrical Acrylic Water Tank)

  • 윤석태;조용진
    • 한국산업정보학회논문지
    • /
    • 제28권6호
    • /
    • pp.99-105
    • /
    • 2023
  • 고도의 생존성이 요구되는 잠수함은 군의 전략자산에서 가장 중요한 전투 무기체계 중 하나이다. 일반적인 재래식 잠수함은 추진시스템을 작동하기 위해 공기가 필요해 필연적으로 스노클 항해를 하며 잠수함 내부로 공기를 공급해야 한다. 그리고 스노클 항해 시 수중으로 배출된 폐기 가스는 주변 유체를 가열해 온도 항적을 형성하고 결과적으로 잠수함의 생존성을 감소시킨다. 본 연구에서는 수중 잠수함의 폐기로 인해 형성된 수면의 온도 항적에 관한 기초 실험 연구를 수행하였다. 이를 위해 국내 도입된 잠수함의 추진시스템과 항해 조건 자료를 수집하였으며, 온도 항적을 계측하기 위한 실험 시스템을 구현하였다. 실험 결과 수조로 주입된 고온 기포는 작은 크기로 부서져 주위를 둘러싼 유체와 유사한 수준으로 온도가 감소하였으며, 이를 열전대 센서로 확인하였다. 그리고 수면의 온도 항적을 계측하기 위한 열화상 시스템의 결과에서도 온도 항적은 계측되지 않았다.

전자부자 시스템을 이용한 유속과 유량의 측정 (Velocity and discharge measurement by the electronic float system)

  • 이찬주;김동구;김용전;김원
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2009년도 학술발표회 초록집
    • /
    • pp.410-414
    • /
    • 2009
  • 홍수 유량 측정에 주로 활용되는 봉부자법은 신속하고 간편하게 유량을 측정할 수 있지만, 부자의 유하 경로를 정확하게 알 수 없으므로 가정된 직선을 따라 유하하지 않을 경우 유속과 단면적 계산에 불확실성이 다소 크게 발생하는 단점이 있다. 또한 측정에 소요되는 시간이 짧지만, 대개 현장에서 유량 계산이 바로 이루어지지 못하므로 측정 유량의 적절성을 충분히 평가하지 못한다. 본 연구에서는 봉부자법의 장점은 살리고 단점을 개선할 수 있는 전자부자 시스템을 개발하고 이를 이용하여 유량을 산정하였다. 개발된 전자부자 시스템은 GPS에 의해 유하경로를 획득하여 RF 통신을 통해 실시간으로 기지국에 정보를 전송한다. 기지국은 3개 RF 채널을 통해 최대 15개의 전자부자의 위치 정보를 동시에 수집하며, 각 전자부자의 유하경로와 미리 측량한 단면 자료를 결합하여 측정과 동시에 자동으로 유속을 계산한다. 이렇게 계산된 유속은 지리정보와 결합되어 있으므로 하천의 평면 2차원적 흐름 특성을 나타내는데 활용될 수 있으며, 나아가 미리 측량된 단면 자료와 결합하여 측정과 동시에 즉각 유량이 얻어질 수 있다. 이러한 점에서 본 연구는 전자부자를 이용하여 현장에서 유속과 유량을 실측한 사례를 제시하고자 한다.

  • PDF

배수영향 하천의 ADVM 방식 자동유량측정시설 운영 및 검증 (Operation and Verification of the Real-time Discharge Measurement System Using ADVM on Backwater Conditions)

  • 조상욱;김대영;한학영;김치영
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2009년도 학술발표회 초록집
    • /
    • pp.1850-1854
    • /
    • 2009
  • 금강하구언 상류에 위치한 규암 지점은 배수영향을 받는 지점으로 2007년도에 ADVM (Acoustic Doppler Velocity Meter)방식 자동유량측정시설을 설치하여 운영 중에 있다. 본 연구에서는 규암 지점 자동유량측정 시설에서 측정된 유량측정성과를 분석하고 다양한 방법을 통해 이를 검증하였다. 그 결과 기존 수위-유량관 계곡선식으로 방류영향 지역의 유량변화를 잘 나타낸 결과를 보였으며, 유량의 경우 총 67회 측정한 검증자료와 평균오차 7.2%로 대체로 비슷하게 산정되었으며, 금강하구언의 방류량과 갑문개방기간 동안 규암 지점의 총 유출량을 비교한 결과 3.2%의 오차를 보여 규암 지점 자동유량측정시설의 측정결과에 큰 신뢰도를 보였다.

  • PDF

2008년 한강수계 주요지천 유량측정 및 유출특성 분석 (River Discharge Measurement and Analysis for The Main Branch Streams of Han-River Basin in 2008)

  • 강규상;이연길;이진원;정성원;한기학
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2009년도 학술발표회 초록집
    • /
    • pp.1052-1056
    • /
    • 2009
  • 본 연구에서는 대상 지점의 강우량자료와 유출수문곡선으로 전 기간에 대한 유출률과 특정기간을 갖는 유출률을 각각 산정하여 유출특성을 분석하였다. 본 연구를 수행하기 위해서 GIS 소프트웨어인 ArcInfo와 ArcView 등으로 대상유역의 유역도, 강우관측망도, 수위관측망도, 수계망도,티센망도 등을 생성하여 대상유역의 수계 특성을 파악하였다. 개발된 곡선식의 적정성을 판단하기위해 상 하류 간의 유출특성 등을 비교 분석하였으며, 유역 내 댐이나 저수지가 존재할 경우 이를 고려하였다. 유출률 산정결과, 이호대교(남한강 본류) 지점에서의 유출률은 방류량을 고려하지 않았을 경우 59.8%, 고려했을 경우 74.5%로 산정되었다. 흑천의 원덕교 지점에서는 67.1%, 경안천의 경안교 지점에서는 78.3%, 홍천강의 성포교와 남산교 지점은 각각 63.3%, 53.1%로 산정되었다. 따라서 개발된 수위-유량관계곡선식은 적정한 것으로 판단되며, 이에 근거하여 유출수문곡선은 양질의 수준인 것으로 평가되었다.

  • PDF

기체-액체 이젝터 유동의 가시화와 광섬유 탐침에 의한 기포분율 측정 (Visualization of Gas/liquid Ejector Flow and Void Fraction Measurement using Fiber Optic Probe)

  • 최성환;지호성;김경천
    • 한국가시화정보학회지
    • /
    • 제11권1호
    • /
    • pp.34-40
    • /
    • 2013
  • Gas/liquid two-phase ejector is a device without moving parts, in which liquid is used to drive gas of a low-pressure source. In this paper, the hydrodynamic characteristics of a vertical down type two-phase ejector were studied using an air-water loop system. Entrained air flow rates were measured with inlet and outlet pressures of the ejector with varying water flow rate. Homogeneous bubbly flows in the discharge pipe were confirmed by the high speed flow visualization method. Quantitative measurements of void fraction were made using a newly developed fiber optic probe system.