• Title/Summary/Keyword: water discharge measurement

Search Result 257, Processing Time 0.027 seconds

Water Repellent Finish of Polyester Fabric Using Carbontetrafluoride Plasma Treatment (4불화탄소 플라즈마처리에 의한 폴리에스테르 직물의 발수가공)

  • 모상영;이용운;김태년;천태일
    • Textile Coloration and Finishing
    • /
    • v.6 no.3
    • /
    • pp.27-36
    • /
    • 1994
  • In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.

  • PDF

A Study on the Oil/Water Separation Efficiency of Laminated Plate Type Oily water Separator with Inclined Angle (경사각을 갖는 적층판식 유수분리기의 유수분리 효율에 관한 연구)

  • 한원희;김준효;최민선
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.25 no.2
    • /
    • pp.365-374
    • /
    • 2001
  • Its a tendency to strengthen related international was as the importance on marine oil pollution recently becomes the issue. According to the regulation of IMO, oil discharge from ships is allowed under 15PPM only and oil filtering equipment is essential. Oily water separator of laminated plate type which is one of gravity type separator can be use as assistant equipment for the oil filtering system to meet the present IMO standard, because it fits well to process large amount of rich oil with high specific gravity. The purpose of this paper is to investigate an efficiency of oil/water separation with the characteristics of laminated plate arrangement. The analyse of oil contents for oil-water mixture were carried out in order to find an efficiency of oil/water separation and an experimental study was simultaneously carried out to investigate internal flow characteristics of separator by visualization method and PIV(Particle Image Velocimetry) measurement at three spaces of plates for 5, 10 and 15 mm with variation of inlet flow rates of $0.25m^3$/h and $0.5m^3$/h. The experimental results showed that the space of the plates acts a significant role in the separating process.

  • PDF

Stage-Discharge Rating Curve Model Development and Modification (하천 수위-유량곡선식 개선 및 모형개발)

  • Chang, Ki-Hwan;Lee, Jae-Hyoung
    • Journal of Korea Water Resources Association
    • /
    • v.38 no.4 s.153
    • /
    • pp.271-280
    • /
    • 2005
  • The goal of this study is to recommend a new type of stage-discharge rating curve ($Q=p(h-e)^{\beta}-{\gamma}$) useful for satisfying divergence, and one other seemingly irresolvable problem related to exited rating curves, while also extending this rating curve model. The problem of divergence is that during the finding of the CZF (cease-to-zero flow) parameter e and while minimizing the sum of total errors of the estimated curve, the exponential parameter ${\beta}$ become an abnormally large value. The insoluble problem is that when the value e is greater then the recorded minimum at the gauged stage, it is impossible to have a negative logarithm value (h-e). The two problems above can be satisfied by adapting the control value ${\gamma}$, which affects the reduction of ${\gamma}$ and gives us the possibility of controlling (h-e) over zero. The study results show that the effects of parameter ${\gamma}$ are very similar to that of e when conducting physical and sensitivity analyses. This system can be used towards developing a new stage-discharge rating curve for river discharge, for use in evaluating the acceptability of existing stage-discharge rating curves generated by using hydrologic analyses at all stations.

Development and assessment of pre-release discharge technology for response to flood on deteriorated reservoirs dealing with abnormal weather events (이상기후대비 노후저수지 홍수 대응을 위한 사전방류 기술개발 및 평가)

  • Moon, Soojin;Jeong, Changsam;Choi, Byounghan;Kim, Seungwook;Jang, Daewon
    • Journal of Korea Water Resources Association
    • /
    • v.56 no.11
    • /
    • pp.775-784
    • /
    • 2023
  • With the increasing trend of extreme rainfall that exceeds the design frequency of man-made structures due to extreme weather, it is necessary to review the safety of agricultural reservoirs designed in the past. However, there are no local government-managed reservoirs (13,685) that can be discharged in an emergency, except for reservoirs over a certain size under the jurisdiction of the Korea Rural Affairs Corporation. In this case, it is important to quickly deploy a mobile siphon to the site for preliminary discharge, and this study evaluated the applicability of a mobile siphon with a diameter of 200 mm, a minimum water level difference of 6 m, 420 (m2/h), and 10,000 (m2/day), which can perform both preliminary and emergency discharge functions, to the Yugum Reservoir in Gyeongju City. The test bed, Yugum Reservoir, is a facility that was completed in 1945 and has been in use for about 78 years. According to the hydrological stability analysis, the lowest height of the current dam crest section is 27.15 (EL.m), which is 0.29m lower than the reviewed flood level of 27.44 (EL.m), indicating that there is a possibility of lunar flow through the embankment, and the headroom is insufficient by 1.72 m, so it was reviewed as not securing hydrological safety. The water level-volume curve was arbitrarily derived because it was difficult to clearly establish the water level-flow relationship curve of the reservoir since the water level-flow measurement was not carried out regularly, and based on the derived curve, the algorithm for operating small and medium-sized old reservoirs was developed to consider the pre-discharge time, the amount of spillway discharge, and to predict the reservoir lunar flow time according to the flood volume by frequency, thereby securing evacuation time in advance and reducing the risk of collapse. Based on one row of 200 mm diameter mobile siphons, the optimal pre-discharge time to secure evacuation time (about 1 hour) while maintaining 80% of the upper limit water level (about 30,000 m2) during a 30-year flood was analyzed to be 12 hours earlier. If the pre-discharge technology utilizing siphons for small and medium-sized old reservoirs and the algorithm for reservoir operation are implemented in advance in case of abnormal weather and the decision-making of managers is supported, it is possible to secure the safety of residents in the risk area of reservoir collapse, resolve the anxiety of residents through the establishment of a support system for evacuating residents, and reduce risk factors by providing risk avoidance measures in the event of a reservoir risk situation.

Development of a 9as-liquid two-phase flowmeter using double orifice plates (2중판 오리피스를 이용한 기액 2상유량계의 개발)

  • 이상천;이상무;남상철
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.10 no.5
    • /
    • pp.619-629
    • /
    • 1998
  • An experimental work was conducted to investigate a feasibility of simultaneous measurement of gas-liquid two-phase flowrates with double orifice plates using air and water. The tests were carried out under the atmospheric pressure and at the ambient temperature using two different tube sizes. Qualities of an air-water flow in the present study have values less than 0.1 and thus the mixed flow showed bubbly, plug, slug flow regimes. The probability density function (PDF) and the power spectral density function (PSDF) of the instantaneous pressure drop traces for the flow regimes were obtained. It is found that some distinctive features exist in the distribution of these functions, depending upon the two-phase flow pattern. The time-averaged value of the instantaneous pressure drop increases with increasing gas and liquid flowrates, showing a single-valued function for the total mass flowrate and the quality. It is also found that the two-phase discharge coefficient exhibits a consistent trend for variation of dimensionless parameters such as the superficial velocity ratio and the gas Reynolds number. The results indicate that simultaneous measurement of two-phase flowrate may be possible based upon a statistical analysis of the instantaneous pressure drop curves monitored using double orifice plates.

  • PDF

An Experimental Study on the Measurement of Water Surface Discharge Temperature of High-Temperature Bubble Injected into Cylindrical Acrylic Water Tank (원통 아크릴 수조로 주입된 고온 기포의 수면 배출 온도 측정에 관한 실험적 연구)

  • SeokTae Yoon;YongJin Cho
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.28 no.6
    • /
    • pp.99-105
    • /
    • 2023
  • Submarines, which require a high degree of survivability, are among the most critical combat weapon systems in military strategic assets. Conventional submarines need air to operate their propulsion systems. Exhaust gases released into the water during snorkel navigation heat the surrounding fluid, producing a temperature wake. This wake, in turn, reduces the submarine's survivability. In this study, we conducted a preliminary experiment on the temperature traces formed by an underwater submarine's waste discharge. For this purpose, we collected propulsion system and navigation condition data from domestically introduced submarines and developed an experimental system to measure the temperature traces. As a result, we observed that high-temperature bubbles injected into the tank broke down into smaller sizes, and their temperature dropped to levels similar to the surrounding fluid. This observation was confirmed using a thermocouple sensor. Consequently, the thermal imaging system designed to measure the temperature trace of the water's surface did not detect any significant temperature traces.

Velocity and discharge measurement by the electronic float system (전자부자 시스템을 이용한 유속과 유량의 측정)

  • Lee, Chan-Joo;Kim, Dong-Gu;Kim, Yong-Jeon;Kim, Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.410-414
    • /
    • 2009
  • 홍수 유량 측정에 주로 활용되는 봉부자법은 신속하고 간편하게 유량을 측정할 수 있지만, 부자의 유하 경로를 정확하게 알 수 없으므로 가정된 직선을 따라 유하하지 않을 경우 유속과 단면적 계산에 불확실성이 다소 크게 발생하는 단점이 있다. 또한 측정에 소요되는 시간이 짧지만, 대개 현장에서 유량 계산이 바로 이루어지지 못하므로 측정 유량의 적절성을 충분히 평가하지 못한다. 본 연구에서는 봉부자법의 장점은 살리고 단점을 개선할 수 있는 전자부자 시스템을 개발하고 이를 이용하여 유량을 산정하였다. 개발된 전자부자 시스템은 GPS에 의해 유하경로를 획득하여 RF 통신을 통해 실시간으로 기지국에 정보를 전송한다. 기지국은 3개 RF 채널을 통해 최대 15개의 전자부자의 위치 정보를 동시에 수집하며, 각 전자부자의 유하경로와 미리 측량한 단면 자료를 결합하여 측정과 동시에 자동으로 유속을 계산한다. 이렇게 계산된 유속은 지리정보와 결합되어 있으므로 하천의 평면 2차원적 흐름 특성을 나타내는데 활용될 수 있으며, 나아가 미리 측량된 단면 자료와 결합하여 측정과 동시에 즉각 유량이 얻어질 수 있다. 이러한 점에서 본 연구는 전자부자를 이용하여 현장에서 유속과 유량을 실측한 사례를 제시하고자 한다.

  • PDF

Operation and Verification of the Real-time Discharge Measurement System Using ADVM on Backwater Conditions (배수영향 하천의 ADVM 방식 자동유량측정시설 운영 및 검증)

  • Cho, Sang-Uk;Kim, Dae-Young;Han, Hak-Young;Kim, Chi-Young
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.1850-1854
    • /
    • 2009
  • 금강하구언 상류에 위치한 규암 지점은 배수영향을 받는 지점으로 2007년도에 ADVM (Acoustic Doppler Velocity Meter)방식 자동유량측정시설을 설치하여 운영 중에 있다. 본 연구에서는 규암 지점 자동유량측정 시설에서 측정된 유량측정성과를 분석하고 다양한 방법을 통해 이를 검증하였다. 그 결과 기존 수위-유량관 계곡선식으로 방류영향 지역의 유량변화를 잘 나타낸 결과를 보였으며, 유량의 경우 총 67회 측정한 검증자료와 평균오차 7.2%로 대체로 비슷하게 산정되었으며, 금강하구언의 방류량과 갑문개방기간 동안 규암 지점의 총 유출량을 비교한 결과 3.2%의 오차를 보여 규암 지점 자동유량측정시설의 측정결과에 큰 신뢰도를 보였다.

  • PDF

River Discharge Measurement and Analysis for The Main Branch Streams of Han-River Basin in 2008 (2008년 한강수계 주요지천 유량측정 및 유출특성 분석)

  • Gang, Gyu-Sang;Lee, Yeon-Kil;Lee, Jin-Won;Jung, Sung-Won;Han, Gi-Hak
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.1052-1056
    • /
    • 2009
  • 본 연구에서는 대상 지점의 강우량자료와 유출수문곡선으로 전 기간에 대한 유출률과 특정기간을 갖는 유출률을 각각 산정하여 유출특성을 분석하였다. 본 연구를 수행하기 위해서 GIS 소프트웨어인 ArcInfo와 ArcView 등으로 대상유역의 유역도, 강우관측망도, 수위관측망도, 수계망도,티센망도 등을 생성하여 대상유역의 수계 특성을 파악하였다. 개발된 곡선식의 적정성을 판단하기위해 상 하류 간의 유출특성 등을 비교 분석하였으며, 유역 내 댐이나 저수지가 존재할 경우 이를 고려하였다. 유출률 산정결과, 이호대교(남한강 본류) 지점에서의 유출률은 방류량을 고려하지 않았을 경우 59.8%, 고려했을 경우 74.5%로 산정되었다. 흑천의 원덕교 지점에서는 67.1%, 경안천의 경안교 지점에서는 78.3%, 홍천강의 성포교와 남산교 지점은 각각 63.3%, 53.1%로 산정되었다. 따라서 개발된 수위-유량관계곡선식은 적정한 것으로 판단되며, 이에 근거하여 유출수문곡선은 양질의 수준인 것으로 평가되었다.

  • PDF

Visualization of Gas/liquid Ejector Flow and Void Fraction Measurement using Fiber Optic Probe (기체-액체 이젝터 유동의 가시화와 광섬유 탐침에 의한 기포분율 측정)

  • Choi, Sung Hwan;Ji, Ho Seong;Kim, Kyung Chun
    • Journal of the Korean Society of Visualization
    • /
    • v.11 no.1
    • /
    • pp.34-40
    • /
    • 2013
  • Gas/liquid two-phase ejector is a device without moving parts, in which liquid is used to drive gas of a low-pressure source. In this paper, the hydrodynamic characteristics of a vertical down type two-phase ejector were studied using an air-water loop system. Entrained air flow rates were measured with inlet and outlet pressures of the ejector with varying water flow rate. Homogeneous bubbly flows in the discharge pipe were confirmed by the high speed flow visualization method. Quantitative measurements of void fraction were made using a newly developed fiber optic probe system.