• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.9-15
• /
• 2006

Neutral sizing is required for linerboard to solve the troubles in strength and process caused by recycled raw materials. AKD sizing efficiency can be influenced by process condition like white water quality, fines retention and so on. Therefore, this study was aimed to evaluate sizing performance of general and fast cure type AKDs using process water obtained from linerboard mill. To evaluate effect of process water quality on AKD sizing, white water was diluted with tap water at the different dilution ratios and UKP slurry was sized using the prepared water. Also, effects of inorganic and organic ion material on sizing were examined. When white water was used for stock forming, UKP sheet showed very low sizing degree. Sizing degree of sheet was increased with increase of dilution ratio because water quality was improved. Especially anionic organic material had a greater influence on AKD sizing than inorganic material. When white water quality was deteriorated, fast cure type AKD showed superior sizing performance to general type AKD.

• Elastomers and Composites
• /
• v.55 no.4
• /
• pp.314-320
• /
• 2020

This study focused on experiments with polyethylene glycol (PEG) and glycidyl methacrylate (GMA), which are functional additives for water-expandable rubber. Polychloroprene rubber (CR)/superabsorbent polymer (SAP) composites were prepared and their cure behaviors, mechanical properties, water absorption rates, and surface morphology were measured based on the functional additives applied. When PEG and GMA were applied to the composites, the water absorption rate increased-including the initial rate-compared to that measured when functional additives were not used. The results also show that PEG has a hydrophilic functional group, which allows it to absorb more water, and GMA acts as a coupling agent between CR and SAP. However, with the introduction of functional additives, the cure rate slowed down and the mechanical properties also decreased.

• Journal of Korean Medical classics
• /
• v.31 no.1
• /
• pp.15-28
• /
• 2018

Objectives : This study first acknowledges that cough, which is a light symptom, can act as a link that leads to more serious disease. With this acknowledgement, the study ponders upon how the people of the past, before the introduction of western medicine, attempted to cure the first sign of cough and how to stop it from developing. Methods : China's Eumsunjungyo and Sikgamboncho, and Chosun's Singnyochanyo and Donguibogam are used mainly to analyze the food cure that were used in relation to sea water, and to discover what types of ingredients and preparation forms were used, how they were taken, what types of food cure there were, and how they were used. Results : There was no ingredient used commonly in all of the four literatures. Eumsunjungyo utilized ingredients related to lamb. Singnyochanyo and Donguibogam were both used in Chosun, but some similarities with the Chinese literatures were discovered in terms of food cure since they were put together with their Chinese counterparts as references. Ingredients that were used commonly in two or more of the literatures were ginger, taoren, xingren, honey, pear, liyu, and pig lung. Conclusions : Some staple folk remedies that later becamce cultural cuisines included drinking the water from boiling pear and honey and boiling and eating pears with peppers stuck in them. The eating of ginger together with korean traditional taffy have taken its own form and became saenggang jeonggwa and pyeongang. The oriental food cure method has been continuing among the folk people in the form of traditional food with the food philosophy of edible homologous as its basis.

• Journal of fish pathology
• /
• v.6 no.2
• /
• pp.219-231
• /
• 1993

The author introduces the preventive and therapeutic methods of diseases in Japanese flounder which have been conducted by the Fish Disease Laboratory, the Mikamewan Fishery Cooperative Union, Ehime Prefecture, since 1982. Prevention 1. Addition of a sand substrate in the culture pond was effective to prevent ulcer disease. 2. Bathing in 0.5ppm of copper ion was effective to prevent some parasites. 3. Low stocking density of the fish reduced an incidence of edwardsiellosis or gliding bacterial disease. 4. Removal of the diseased fish prevented thd spread of lyphoeystis. 5. So-called $\pi$-water was effective to prevent the fry from some diseases. 6. Immersion of the juvenile in a sodium nifrusylate solution during transportation was effective to prevent gliding bacterial disease. Therapy 1. Sodium nifrustylate or oxytetracycline was effective to cure gliding bacterial disease. 2. Bathing in formalin(150ppm) or freshwater was effective to cure scuticociliatidosis. 3. Erythromycin was effective to cure $\beta$-hemolytic Streptococcus sp. infection. 4. Bathing in a hydrogen peroxide solution(1.5%) was effective to cure white spot disease.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.138-144
• /
• 2014

Purpose: This study examined the water sorption of commonly used dual-cure resin cements and compared the change in the micro-hardness among the cements. Materials and Methods: Five types of dual-cure resin cements (Maxcem, Duo-link, Panavia F, Variolink II, Rely X Unicem) were selected. Fifty specimens were classified into five groups containing ten specimens in each group. The water sorption of the five specimens in each group was evaluated after being immersed in distilled water (DDW) for seven days. The following results were obtained by comparing the specimens immersed in DDW with those not immersed in DDW. Results: 1. The water sorption of Maxcem showed the highest score, followed by Panavia F. These two cements were followed by Duo-link and Rely X Unicem. The water sorption of Variolink II showed the lowest score among the cements used in this study. 2. Among the specimens not immersed in DDW, the micro-hardness of Rely X Unicem showed the highest score followed by Panavia F and Variolink II. These cements were followed in order by Duo-link and Maxcem. 3. Among the specimens immersed in DDW, the microhardness of Rely X Unicem showed the highest score followed by Maxcem, Panavia F and Variolink II. Duo-link shoed the lowest score among the cements used in this study. 4. Maxcem, Duo-link, Panavia F and Rely X Unicem showed significant differences in micro-hardness due to water resorption but Variolink II was unaffected by immersion in water. Conclusion: Using the resin cement which has lower water sorption and higher micro-hardness is recommended.

• Journal of Oriental Neuropsychiatry
• /
• v.9 no.2
• /
• pp.19-35
• /
• 1998

Some oriental medicine turned out to have a significant clinical effect on the cure for dementia. Therefore, thorough scientific tests for physiological effect of oriental medicne are needed. This study is aimed at doing experimental studies on the effects of two medicines, Jowiseungcheongtang and hyungbangjihwangtang, on the cure for dementia.For the demonstration of the effect of the two medicines on aged rats, we perfomed a radial arm medicines on aged rats, water maze task, known for their proper learning paradigm for behavior.Previous studies on aging and dementia show that aged rats displayed significant impariments in the learning of the radial arm maze task compared with younger rats. As in experiment 1, we found that the learning of the radial arm maze task compared with younger rats. As in experiment 1, we found that the learning deficits aged rats exhibit in radial arm maze task were improved with the application of each medicine. The resutls suggest that these two medicine can be effective to patients whose working or shortterm memory is impaired. In experiment 2 we studied the effect of the two medicines on the deficit of the aged rats with the Morris water maze task known for measuring long-tern memory. We did not find significant results between the performance of the ages rats and the younger ones. Considered the different results previous studies have reported, more thorough studies are needed to investigate the effect of the medicines on long-term memory.In conclusion, the results we found in experiment 1 and 2 suggest that Jowisengcheongtang and hyungbangjihwangtang can have useful effects for the cure of age-related memory (especially for short-term memory)deficits. Recent interests in dementia urges researchers concerned to explore the effect of oriental medicine on the disease. As there have been relatively few behavioral or scientific studies on dementia using oriental medicine to date, further studies are expected are expected to continue to elucidate 'what the wisdom of the oriental medicine tells about dementia'.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.476-492
• /
• 2003

Purpose : The purpose of this study was to compare HEMA and TEGDMA as diluents for the composite resin. Material and methods : Eight kinds of experimental light curable composite resins were prepared and used. Concentrations of monomer and filler were same for all experimental composites, except, the diluent's ratios to the monomer. The ratio of diluents to Bis-GMA were 15%, 20%, 25%, and 30%, and two kinds of diluents were used, so total experimental groups were eight including one control group of 25% TEGDMA. Results : Depth of cure, flexural strength, shear bond strength to bovine enamel, shear bond strength to bovine dentin, water absorption and solubility of composites in water were measured. Sample size for each groups were 10. Arithmetic means were used as each groups representative values, and regression test for two diluents and low concentrations, Duncan's multiple range test, and Two-way ANOVA test were done for kinds of diluents and its concentrations at level of 0.05. Conclusion : Following results were obtained ; 1. There were not significant differences in effects of HEMA and TEGDMA to depth of cure, flexural strength of composites and shear bond strength to bovine enamel (p>0.05). 2. Increase of the concentrations of the diluents made the depth of cure (p<0.001) and flexural strength (p<0.05) a little higher. 3. Shear bond strength to dentin was higher on HEMA containing composites than TEGDMA containing composites (p<0.001). 4. Water absorption was higher on HEMA containing composites than TEGDMA containing composites (p<0.01).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.468-471
• /
• 2003

Fault of under ground power cable occurs usually from the water tree such as the vented tree, the bow tree and the water-rich halo. The water tree penetrates to the polyethylene cable insulations. Sometimes, the water tree also diffuses to mother cable in the substation. In this paper, instead of replacement of the faulty cable, we tried to cure an electrical power cable degraded by the water trees with silicon injection method. And measured the results with the isothermal relaxation current analysis method. After cable cure, Chonil line was improved from 2.27 to 1.96 in a phase, from 2.148 to 2.020 in b phase, and from badness to 2.192 in c phase. And Keumam line was also improved from 2.419 to 1.920 in a phase, from 2.301 to 2.000 in b phase, and from badness to 1.957 in c phase.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.681-686
• /
• 2002

In the industrial field, the theory of drying process is different from the practical application, and it is effective to reduce energy by recirculation of the heat of exhausting gas. But the study of this field may not be performed still. The cure properties of the urea resin moulding compounds was investigated according to drying temperature, drying time, recycle rate of exhausting gas and moulding temperature in the process of drying and moulding. We obtained the following results; water content of material decreases with increasing drying time and drying temperature, and the rate of drying also decreases with increasing recycle rate of exhausting gas. Specially, The cure fluidity of the urea resin moulding compounds decreases, with increasing drying temperature, recycle rate of exhausting gas and moulding temperature. And the correlation equations on water content and cure fluidity of the urea resin moulding material were obtained through a regression analysis of experimental data.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.2
• /
• pp.52-59
• /
• 1993

This study is investigated of tensile and fatigue strength for advanced composite materials under hygrothermal environment. The materials used are two types of Carbon/Epoxy reinforced composite materials i.e., 13$0^{\circ}C$ cure-type composite T-1/347, and 18$0^{\circ}C$ cure-type MM-1/982X. These are composed by cross-ply laminates. Test condition is the distilled water of 8$0^{\circ}C$. The separate absorption contents estimated by the Fick's diffusion rule are similar to the experiment results. The tensile strength of T-1/347 wet specimens more increased than that of dry ones, but that of MM-1/982X decreased. The fatigue strengthes of both T-1/347 and MM-1/982X wet specimen more decreased than those of dry specimens.