• Journal of the Korean Applied Science and Technology
• /
• v.22 no.4
• /
• pp.332-338
• /
• 2005

This study was conducted to prepare acrylic removable protective coatings by emulsion polymerization. Monomers used were n-butyl acrylate, acrylonitrile, butyl methacrylate. Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was 200 rpm. Tensile strength, extension, peel strength, viscosity, and solid contents of the synthesized coatings were examined. The coatings prepared with BA:AN = 60:20 (in weight ratio) satisfied the standard for automobile in terms of extension and peel strength. When the concentration of BMA was in a range of $18{\sim}23$ wt%, the prepared coatings satisfied the standard for automobile in terms of peel strength and water resistance.

• Membrane and Water Treatment
• /
• v.13 no.4
• /
• pp.173-181
• /
• 2022

Polyvinylidene fluoride (PVDF) flat sheet hydrophobic membranes were prepared using 16 wt% PVDF in Dimethyl acetamide (DMAc) by phase inversion technique for desalination application using Membrane Distillation (MD). In this work, the effect of coagulation mediums such as ethanol and water as well their synergistic behavior on the fabricated PVDF membrane morphology was studied using SEM. Moreover, other characteristics required for the membrane distillation applications namely porosity, hydrophobicity and tensile strength were measured using the gravimetric method, sessile drop method and universal testing machine respectively. It was observed that the membrane morphology paradigm shifted from the finger-like structure to the sponge-like structure on increasing the ethanol concentration in coagulant. The porosity of the fabricated membrane was under the required MD range and found to be 57.3% at 16 weight % of PVDF in DMAc solvent under a pure ethanol coagulant bath. Moreover, the top surface contact angle ranges from 85° to 115° on increasing the bath concentration from CBC 0 to CBC 100 at 16 weight % of PVDF in DMAc solvent.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.156-161
• /
• 2018

$TiO_2$ photocatalyst powders were prepared by chlorination method and sol-gel method. Specific surface area and crystalline (i.e., anatase and rutile) of the catalyst varied depending on manufacture conditions and method. TTIP-sol photocatalyst had higher methylene blue (MB) decomposition characteristics than photocatalyst from chlorination method and TBOT-sol. MB removal efficiency from aqueous solution with TTIP-sol photocatalyst was over 90%. Experimental results showed that the $TiO_2$ photocatalyst with a single anatase phase and a large specific surface area had high decomposition characteristics of organic materials.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.5-11
• /
• 2022

Despite the increasing importance of manufacturing and application R&D for ultrapure deionized water and electrolyzed ion water, various and systematic studies have not been conducted until now. In this study, the electrostatic discharge (ESD) behavior of electrolyzed ion water using a proton exchange membrane(PEM) was evaluated according to the type, flow rate, and bubble of electrolyzed ion water. In addition, by observing that Oxidation Reduction Potential (ORP) value returns to the unique value of electrolyzed ion water after electrostatic discharge, the possibility of two types of ions participating in electrostatic discharge ((H₂O)_n⁺ (assumed)) and ions for maintaining the characteristics of electrolyzed water could be inferred. In order to confirm the chemical structure and characteristics of the cations, in-depth research related to water molecular orbital energy or band gap should be followed.

• Membrane and Water Treatment
• /
• v.1 no.4
• /
• pp.283-296
• /
• 2010

During the disinfection of potable water, humic substances present in the solution react with chlorine to form potential carcinogenic compounds. This study evaluates the feasibility of using a submerged membrane photocatalysis reactor (SMPR) process for treatment of humic substances through the characterization of both organic removal efficiency and membrane hydraulic performance. A simple SMPR was operated and led to the removal of up to 83% of the polluting humic matters. Temporal rates of organic removal and membrane fouling were found to decrease with filtration time. Using tighter membrane in the hybrid process resulted in not only higher organic removal, but also more significant membrane fouling. Under the experimental conditions tested, optimum $TiO_2$ concentration for humic removal was found to be 0.6 g/L, and increasing initial pollutant concentration expectedly resulted in a more substantial membrane fouling. The importance of the influent nature and pollutant characteristics in this type of treatment was also assessed as various water sources were tested (model humic acid solution vs. local water containing natural organic matters). Results from this study revealed the promising nature of the SMPR process as an alternative technique for organic removal in the existing water treatment system.

• Journal of Korean Society on Water Environment
• /
• v.40 no.1
• /
• pp.1-10
• /
• 2024

Algal blooms occur seasonally in the eutrophicated rivers or reservoirs, and some harmful cyanobacteria species produce toxic substances, which are directly or indirectly harmful to the ecosystem and terrestrial animals. So, the monitoring and control of harmful cyanobacteria occurrence and toxins residual in the aquasystem are important to preserve the water environment and secure public health. In this study, the four harmful cyanobacteria occurrences and toxic substance concentrations of two agricultural reservoirs in the southern part of Gyeonggi Province were investigated from August to October 2022. Among four harmful cyanobacteria (Microcystis sp., Anabaena sp., Oscillatoria sp., Aphanizomenon sp.), three kinds of cyanobacteria except Oscillatoria sp. were observed, and Microcystis sp. was the dominant cyanobacteria except for Anabaena sp. dominant result of a sample collected on October at reservoir B. The cell density of cyanobacteria was influenced by season and weather due to the length of daytime and concentrations of organic carbon and nitrogen. Three kinds of microcystin and anatoxin-a were quantitatively analyzed as total (in the cell body and water) and extracellular (in water) concentrations. The maximum total concentrations of anatoxin-a, microcystin-LR, microcystin-RR, and microcystin-YR were 0.1291 ㎍/L, 0.2776 ㎍/L, 0.3721 ㎍/L, and 0.0306 ㎍/L, respectively, in reservoir A and 0.3274 ㎍/L, 0.1495 ㎍/L, 0.2037 ㎍/L, and 0.0153 ㎍/L, respectively, in reservoir B.

• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.2
• /
• pp.179-184
• /
• 2001

This study was conducted to determine the smoke component distribution and the relationship between chemical components and physical characteristics of cigarettes. 16 different cigarette brands which were sold in the market were selected for this study. Five kinds of smoke components which have been tar, nicotine, water, carbon monoxide(CO) puff No., and six kinds of physical characteristics which were filter type, leaf weight, filter weight, UPD, EPD, dilution rate were analyzed. The average values in tar, nicotine, water, CO concentration were 6.5 mg/cig. 0.66 mg/cig, 1.12 mg/cig. and 6.32 mg/cig., respectively. The average ratios of nicotine/tar and CO/tar were 0.10, and 1.02 respectively. The distribution of smoke components collected in the cambridge filter and cigarette filter was different. The averages of tar and nicotine removal efficiency by a cigarette filter were 53%, and 48%, respectively. All smoking components were positively correlated with other smoking components. filter types, EPD, and dilution rate were showed high correlation to the changes of smoke components. Especially, dilution rate of cigarette strongly affected on the changes of all smoke components.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.6
• /
• pp.785-792
• /
• 2014

This study investigated the optimal mix ratio of frozen-dried loquat fruit powder and the optimun conditions for making Seolgidduk by analyzing chemical properties, rating moisture contents, color, mechanical quality characteristics and sensory characteristics Seolgidduk was made with 0, 2, 4, 6 and 8% frozen-dried loquat fruit powder, which contains functional components. Chemical analysis showed that loquat fruit powder contained of 12.87% water, 2.23% crude protein, 0.55% crude fat, 3.57% crude ash and 3.89% crude fiber. Water content of Seolgidduk containing loquat fruit ranged from 36.58~39.18%. With more loquat fruit powder L value decreased, while the 'a' value and 'b' values increased. According to scanning electronic microscopy, Seolgidduk containing frozen-dried loquat fruit powder showed weak coherence. Hardness decreased with more frozen-dried loquat fruit powder. In the sensory test, Seolgidduk with 4% loquat fruit powder was the most preferred with less sourness, proper softness, moisture and chewiness. Based on the results of this experiment, Seolgidduk with 4% loquat fruit powder showed less hardness than the control group. These results show that quality and preference increased when 4% loquat fruit powder was added to Seolgidduk. Therefore, Seolgidduk with 4% of loquat fruit powder is expected to increase quality and preference of Seolgidduk.

• Journal of the Korean Chemical Society
• /
• v.40 no.6
• /
• pp.436-444
• /
• 1996

The characteristics of water have been studied for 1 year by means of relationships between tritium and total dissolved solid(TDS), tritium and conductivity, tritium and chloride, and tritium and total hardness for 15 springs in the vicinity of Jeonju city of Korea. From the results of the study, the springs were divided into four characteristic groups, but the characteristics of most springwaters studied were similar to those of rainfall. Fifteen springwaters were evaluated to see if those are tasty and healthy using the Hashimoto's Mineral Balance Index. As a result, only one spring (J-4) was found as tasty and healthy.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.393-401
• /
• 2011

Natural Curcumin belongs to Zingiber Officinale Roscoe was known to possess natural odor, natural taste, natural color, and other pharmaceutical & chemical characteristics. Natural Curcumin extract was made to use ethanol as a solvent was to show a yellow color having state of solid powder and an active component. Natural Curcumin extract tested pharmaceutical & chemical experiment to dilute in curcumin 1%-water solution. Curcumin extract tested antimicrobial experiment using microbe, and tested dye experiment using fiber. Some conclusions in the result of characteristics experiment was obtained as follow. The result of antimicrobial experiment showed that the growth of staphylococcus aureus (ATCC-001) and aspergillus niger (ATCC-002) as microbes decreased according to passage of time. This phenomenon could know that Curcumin compoment showed influence to antimicrobial effect. Also, the result of dye experiment showed that cotton and sick with fiber dyeing dyed in direction of dark yellow color. This phenomenon could know that Curcumin extract showed influence to dyeing effect in observation of optical electron microscope(OEM.) The result of instrument analysis ascertained inorganic components of K(53.300ppm), Na(1.150ppm), Ca(0.711ppm), Ti(0.351ppm), Li(0.256ppm), Cu(0.233ppm) etcs from Curcumin component with ICP/OES, and ascertained organic components of propanoic acid(1.859), benzene(10.814), phenol(14.194) etcs from Curcumin component with GC/MSD.