• 한국안광학회지
• /
• 제16권3호
• /
• pp.237-245
• /
• 2011

목적: 안경 렌즈에 물리적, 화학적 자극이 반복적으로 가해졌을 때 렌즈 코팅막의 기능에는 어떠한 변화가 나타나는 지를 알아보고자 하였다. 방법: CR-39 재질의 안경 렌즈 표면에 물리적, 화학적 자극으로 테이프 떼기, 아세톤 문지르기, 아세톤에 침윤 및 증류수에 침윤하기를 시행한 후 렌즈 표면의 변화, 광투과율 변화, 김서림 시간 변화 및 손상된 렌즈 표면의 안정성 여부를 측정하였다. 결과: 하드 코팅의 기능 변화를 알아보기 위한 표면관찰시 아세톤에 침윤한 안경 렌즈만이 침윤 30분 후부터 표면의 변화가 나타났다. 반사방지 코팅의 기능 변화를 알아보기 위한 광투과율 측정시 증류수에 180분간 침윤한 안경 렌즈는 1% 정도의 미세한 감소를 보인 반면 아세톤에 침윤시킨 렌즈에서는 침윤 60분 후 반사방지 코팅의 기능이 거의 소실됨을 알 수 있었다. 안티포그 코팅의 기능 변화를 알아보기 위한 김서림 지속시간 측정시 아세톤에 침윤시킨 안경 렌즈에서 김서림 지속시간이 증가하였다. 자극에 의해 손상받은 코팅막의 안정성을 알아보았을 때 테이프로 떼어내기, 아세톤으로 문지르기, 증류수에 침윤 및 아세톤에 침윤시킨 렌즈 표면의 코팅 손상이 관찰되었다. 결론: 반복적인 물리적, 화학적 자극으로 인하여 안경 렌즈의 코팅 변화가 관찰되었으므로 안경 조제 과정 중이나 안경 착용 시 이에 대한 주의가 요구된다.

• Bulletin of the Korean Chemical Society
• /
• 제26권10호
• /
• pp.1515-1519
• /
• 2005

Tungsten oxide-modified TiO2 thin films were formed on a glass substrate by sol-gel and dip coating processes using acetyl acetone as a chelating agent. The hydrophilic properties of the thin films were investigated with illumination of UV light. The dependence of water contact angle on material composition and morphology of the film is established with SEM image and AFM profile. The surface morphology was controlled with the change of precursor concentration. 0.01 M of tungsten oxide-modified Ti$O_2$ have shown the highest hydrophilicity after UV-irradiation. The effect of composition on photoinduced hydrophilicity of the W$O_3$-Ti$O_2$ films was also investigated. The films were characterized by XRD, SEM, AFM and XPS.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.77-81
• /
• 2010

This study deals with the analysis of color-difference and physical property of anti-corrosion coatings using at inside of concrete tank for drinking water. Because anti-corrosion coatings are effected by chemical attack, color and physical property are changed. So in this study when epoxy resin coatings of 3 types were received chemical attack by Cl- and NaOH, we present the co-relationship between color-difference and bond strength. For this study, we used the colorimetry, which can measure the degree of color difference on surface of materials. As the results, in case of Cl-, color change is appeared, bond strength also is decreased. From this experiment, we could know that color change due to chemical aging has the deep relationship with physical performance(bond strength) materials. further researches are needed.

• 한국농촌건축학회논문집
• /
• 제21권4호
• /
• pp.45-52
• /
• 2019

Chemical grouting method is mainly used for construction of dams and reservoirs, stabilization and reinforcement of slopes, reinforcement of soft grounds such as embankments, dredging and landfills, the order of earthquake response method, and the reinforcement of structures. Recently, it is widely applied in construction sites such as highways, airfields, high-speed railways, subsea facilities, port construction works, tunnels, and subway works. As such, the demand for grouting continues to increase. The development of the grouting method was focused on increasing the strength of the ground, and the development of the chemical additives, the injection device, and the stirring device were mainly performed. But ordinary portland cement used for grouting is a product that consumes natural resources such as limestone, generates a large amount of greenhouse gases, consumes a large amount of energy sources, and it is time to develop products and new methods to replace them. In this study, Ordinary Portland Cement and New Grouting Binder (circulating fluidized bed boiler fly and blast furnace slag) were compared and analyzed by the following test. Homo-gel strength and homo-gel time, water quality analysis of the water used and soil contamination process tests of homo-gel samples were performed. In the case of NGB, when Using water is used as the reservoir water, the strength measured smaller than that of the other water. However, it shows about 2.5 times greater than the homo-gel compressive strength applied to OPC (7-day, reservoir water), so there is no problem with water quality when applied.

• 한국지반환경공학회 논문집
• /
• 제13권3호
• /
• pp.71-76
• /
• 2012

자연상태의 퇴적물과 준설과정을 거친 준설토 사이에는 퇴적물이 안정상태에서 교란되기 때문에 수질의 탁도가 좋지 않으며, 다시 침강 시 체적변화가 발생한다. 이에 수질의 탁도를 좋게하고 준설토의 부유물질의 침강을 촉진하기 위하여 투입되는 응결제 및 응집제의 양에 따라 준설토는 다양한 특징을 보인다. 본 연구에서는 자연상태의 습윤준설토와 노건조준설토에 약품회사 A, B, C사의 약품투입량에 따른 준설토의 부유물질(SS)측정, 체적변화 및 침강속도의 특성분석을 파악하고자 연구를 수행하였다. 실험 결과 습윤준설토와 노건조준설토의 약품량이 많을수록 부유물질(SS)측정은 낮아지고, 체적변화율은 증가하는 경향을 보이고 있으며, 침강속도는 빨라지는 경향을 보였다. 또한 습윤준설토와 노건조준설토의 약품량의 차이는 노건조준설토 경우 $100{\pm}5^{\circ}C$에서 건조시키기 때문에 유기물 및 미생물이 소멸하여 적은 양으로도 약품에 민감한 반응을 보이는 것으로 판단된다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제23권E1호
• /
• pp.10-15
• /
• 2007

The gas hydrates are probably most sensitive to climate change since they are stable only under specific conditions of high pressure and low temperature. One of the main factors responsible for formation of gas hydrates is the saturation of the gases with water vapor. Quantitative phase equilibrium data and understanding of the roles of water component in the phase behavior of the heterogeneous water-hydrocarbon-hydrate mixture are of importance and of engineering value. In this study, the water content of ethylene gas in equilibrium with hydrate and water phases were analyzed by theoretical and experimental methods at temperatures between 274.15 up to 291.75 K and pressures between 593.99 to 8,443.18 kPa. The experimental and theoretical enhancement factors (EF) for the water content of ethylene gas and the fugacity coefficients of water and ethylene in gas phase were determined and compared with each other over the entire range of pressure carried out in this experiment. In order to get the theoretical enhancement factors, the modified Redlich-Kwong equation of state was used. The Peng-Robinson equations and modified Redlich-Kwong equations of state were used to get the fugacity coefficients for ethylene and water in the gas phase. The results predicted by both equations agree very well with the experimental values for the fugacity coefficients of the compressed ethylene gas containing small amount of water, whereas, those of water vapor do not in the ethylene rich gas at high temperature for hydrate formation locus.

• Bulletin of the Korean Chemical Society
• /
• 제23권10호
• /
• pp.1445-1450
• /
• 2002

Solvolytic rate constants at 25 $^{\circ}C$ are reported for solvolysis of chlorodithioformate (1) in binary mixtures of water with acetone, ethanol, methanol, methanol-d, 50%methanol-d/50%D2O, and 2,2,2-trifluroethanol (TFE), and also in TFE-ethanol mixtures. The Grunwald-Winstein plot shows that the three aqueous mixtures exhibit dispersions into separate line. The correlation is improved only slightly by additional parameters NT for solvent nucleophilicity and/or I for aromatic ring parameter. Rate ratios in solvents of the same $Y_cl$ value, having different nucleophilicity provide measures of the minimum extent of nucleophilic solvent assistance, and the value of 3.35 for $[$k_{40EW}$/$k_97TFE$]_Y$ (EW = ethanol-water), is consistent with an essentially SN1 reaction mechanism. This study has shown that the magnitude of l, m and h values associated with a change of solvent composition is able to predict the SN1 reaction mechanism. log(k/$k_o$) = mY + lN + hI

• Membrane and Water Treatment
• /
• 제14권2호
• /
• pp.85-93
• /
• 2023

Membrane separation is widely used for several applications such as water treatment, membrane reactors and climate change. Cross-linked organic-inorganic hybrid polyvinylidene fluoride (PVDF) / Tetraethyl orthosilicate (TEOS) was adopted for the preparation of optimized hollow membrane (HFM) for membrane distillation or other low pressure separators for mechanical properties and permeability under varying pretreatment schemes. HFMs were prepared on semi-pilot membrane fabrication system. Novel adopted post-treatment schemes involved soaking in glycerol, magnesium sulphate (MgSO₄), sodium hypochlorite (NaOCl), and isopropanol for different durations. All fibers were characterized for morphology using a scanning electron microscope (SEM), surface roughness using atomic force microscope (AFM), elemental composition by examining Energy Dispersive Spectroscopy (EDS), water contact angle (CA°) and porosity. The performance of the fibers was evaluated for pure water permeation flux (PWF). Post-treatment with MgSO₄ gave the highest both tensile modulus and flux. Assessment of properties and performance revealed comparable results with other organic-inorganic separators, HF or flat. In spite of few reported data on post treatment using MgSO₄ in presence of TEOS, this proves the potential of low cost treatment without negative impact on other membrane properties. The flux is also comparable with hypochlorite which manifests substantial precaution requirements in actual industrial use.The relatively high values of flux/bar for sample treated with TEOS, post treated with MgSO₄ and hypochlorite are 88 and 82 LMH/bar respectively.

• 멤브레인
• /
• 제21권3호
• /
• pp.270-276
• /
• 2011

기질 고분자인 sulfonated PEEK (sPEEK)와 가교제(cross-linking reagent) 4,4'-ethyldianiline (EdAn), 그래프트제(grafting reagent) 2-phenylethylamine (PEA)을 용매 dimethylacetamide (DMAc)에 녹여 용매증발법을 이용하여 제막하였다. 이민화 반응(imination)과 술폰화(sulfonation) 과정을 거쳐 최종 이온교환막인 cross-linked and grafted sPEEK (CG-sPEEK)막을 제조하였다. FT-IR 분석을 통해 술폰화 및 이민화 반응여부를 확인할 수 있었다. Proton conductivity와 water uptake, volume change를 측정하여 상용화된 Nafion115와 비교함으로써 이온교환막으로서의 활용가능성을 평가하였다. 제조된 CG-sPEEK막의 proton conductivity (0.17 S/cm) 값이 Nafion115 (0.10 S/cm) 보다 우수하게 나타나 이온교환막으로서의 적용가능성을 보여주었다. 다만 높은 water uptake (130%)는 CG-sPEEK의 치수안정성을 위해서 저감시킬 필요가 있다.

• Korean Chemical Engineering Research
• /
• 제59권2호
• /
• pp.232-238
• /
• 2021

The development of a low cost catalyst with high performance and small amount of carbon deposition on catalyst from toluene steam reforming were investigated by using coal ash as a support material. Ni-loaded coal ash catalyst showed similar catalytic activity for toluene steam reforming compared with the Ni/Al2O3. At 800 ℃, the toluene conversion was 77% for Ni/TAL, 68% for Ni/KPU and 78% for Ni/Al2O3. Ni/TAL showed similar toluene conversion to Ni/Al2O3. However, Ni/KPU produced higher hydrogen yield at relatively lower toluene conversion. Ni/KPU catalyst showed a remarkable ability of suppressing the carbon deposition. The difference in coke deposition and hydrogen yield is due to the composition of KPU ash (Ca and Fe) which increase coke resistance and water gas shift reaction. This study suggests that coal ash catalysts have great potential for the application in the steam reforming of biomass tar.