• 한국연초학회지
• /
• 제15권1호
• /
• pp.90-97
• /
• 1993

1. Average moisture content of tobacco in BIB silo was about 19: 1% until 4hours conditioned time, and then moisture variation of tobacco after 2hr conditioned was very small. 2. Application of mathematical model for ordering system. 1) The constant K in the exponential equation varies inversely with both relative humidity and equilibrium moisture. 2) Time needed to order blending tobacco leaves with standard moisture from bulking and blending silo was 4 hours. 3) Reconstituted tobacco sheet had higher moisture absorption ratio than Oriental and Burley tobacco. 4) For minimize of conditioning time in BIB silo, the values of K and Mo given in this study can be used in equation(1) to calculate moisture absorption ratio and optimum conditioning time. 3. Average moisture content and water activity of conditioned tobacco for 4 hours in BIB silo was about 20% and 0.65. In this condition. microbial life will inhibite 4. Physical properties of conditioned tobacco in bulking and blending silo for 4hours was virtually no change.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.49-52
• /
• 2006

Epoxy resin has less reaction shrinkage, has better water proofing and thermal resistance than other repairing materials, to it has been applied broadly to repair and finish buildings and infrastructures. Although the ambient temperature constructed is varied with the seasons and epoxy resin has to mix with appropriate hardener due to the non self-hardening, as the real construction of it, the ambient temperature is ignored and the blending ration of epoxy resin and hardener is fixed. Also, because of the hardening time is aimed to temperature condition and the tolerance of blending ratio, we investigated the variation of viscosity according to ambient temperatures and hardener ratios. As a results of study, we can select the economical blending ratio of the epoxy resin and hardener according to site situation.

• 콘크리트학회지
• /
• 제4권1호
• /
• pp.97-106
• /
• 1992

보통 포틀랜드 시멘트에 수쇄고로 슬래그, 플라이 애쉬, 실리카흄 등을 치환첨가한 시멘트 페이스트 경화체를 통한 C1-이온의 겉보기 확산계수를 구하고 경화체에서 추출한 세공용액의 C1-이온의 결합능력을 구하였다. C1-이온의 확산계수는 W/C의 증가에 따라 증가하였으며, 혼화재를 치환첨가한 경우 감소하였다. 세공용액의 C1-이온의 농도 및 OH-이온의 농도도 혼화재의 첨가로 감수하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.155-155
• /
• 2018

Uncertainty in flood forecasting using a coupled meteorological and hydrological model is arisen from various sources, especially the uncertainty comes from the inaccuracy of Quantitative Precipitation Forecasts (QPFs). In order to improve the capability of flood forecast, the uncertainty estimation and mitigation are required to perform. This study is conducted to investigate and reduce such uncertainty. First, ensemble QPFs are generated by using Monte - Carlo simulation, then each ensemble member is forced as input for a hydrological model to obtain ensemble streamflow prediction. Likelihood measures are evaluated to identify feasible member. These members are retained to define upper and lower limits of the uncertainty interval and assess the uncertainty. To mitigate the uncertainty for very short lead time, a blending method, which merges the ensemble QPFs with radar-based rainfall prediction considering both qualitative and quantitative skills, is proposed. Finally, blending bias ratios, which are estimated from previous time step, are used to update the members over total lead time. The proposed method is verified for the two flood events in 2013 and 2016 in the Yeonguol and Soyang watersheds that are located in the Han River basin, South Korea. The uncertainty in flood forecasting using a coupled Local Data Assimilation and Prediction System (LDAPS) and Sejong University Rainfall - Runoff (SURR) model is investigated and then mitigated by blending the generated ensemble LDAPS members with radar-based rainfall prediction that uses McGill algorithm for precipitation nowcasting by Lagrangian extrapolation (MAPLE). The results show that the uncertainty of flood forecasting using the coupled model increases when the lead time is longer. The mitigation method indicates its effectiveness for mitigating the uncertainty with the increases of the percentage of feasible member (POFM) and the ratio of the number of observations that fall into the uncertainty interval (p-factor).

• Membrane and Water Treatment
• /
• 제7권4호
• /
• pp.355-365
• /
• 2016

The improvement of fouling resistance of porous polymeric membrane is one of the most important targets in membrane preparation for water purification in many process like wastewater treatment. Membranes can be modified by various techniques, including the treatment of polymer material, blending of hydrophilic polymer into polymer solution, and post treatment of fabricated membrane. This research proposed the modifications of morphology and surface property of hydrophobic membrane by blending polyethersulfone (PES) with three polymeric additives, polyvinylpyrrolidone (PVP), Pluronic F127 (Plu), and Tetronic 1307 (Tet). PES hollow fiber membranes were fabricated via dry-wet spinning process by using a spinneret with inner and outer diameter of 0.7 and 1.0 mm, respectively. The morphology changes of PES blend membrane by those additives, as well as the change of performance in ultrafiltration module were comparatively observed. The surface structure of membranes was characterized by atomic force microscopy and Fourier transform infra red spectroscopy. The cross section morphology of PES blend hollow fiber membranes was investigated by scanning electron microscopy. The results showed that all polymeric additives blended in this system affected to improve the performances of PES membrane. The ultra-filtration experiment confirmed that PES-PVP membrane showed the best performance among the three membranes on the basis of filtration stability.

• 공업화학
• /
• 제23권2호
• /
• pp.217-221
• /
• 2012

에틸렌-아크릴산 공중합체(EAA)를 물에 분산시킨 후, 폴리(비닐 알코올) (PVA) 수용액과 블렌딩하여 내수성 및 차단성이 향상된 필름을 제조하였다. EAA의 함량에 따라 제조된 필름으로 열적-기계적 성질, 접촉각, 수분 투과율, 산소 투과율을 측정하였고 내수성에 대한 평가 실험도 진행하였다. 필름의 인장강도는 $9.16{\sim}11.75\;kg/mm^2$으로 PVA와 큰 차이가 없었으며, 경도의 경우는 EAA 함량에 따라 값이 점점 증가하였다. 유리전이 온도와 용융 온도는 약간 향상되었다. PVA/EAA의 비율이 90/10인 블렌딩 필름의 경우 Swelling 109%, Solubility 0%로 측정되어 PVA에 비하여 내수성이 개선되었음을 확인할 수 있었다. 또한, PVA/EAA의 비율이 90/10인 블렌딩 필름(두께 $2.5\;{\mu}m$)을 PET 필름(두께 $50\;{\mu}m$) 위에 코팅하여 제조된 필름의 수분투과율과 산소 투과율은 각각 $9.1\;g/m^2/day$과 $2.0\;cc/m^2/day$으로 측정되었다.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.8-16
• /
• 2001

To manufacture toilet tissue with ONP (old newspaper), the effect of fractionation fiber (R150, R100, R70 mesh) and bleaching(P, PY), blending (70/30) with MOW(mixed office wastepaper) or WL(white ledger) and the addition of softener on the optical and mechanical properties were studied. Considering the pulp yield, brightness and strengths, fibers of R100 mesh fraction were proper to be produced to toilet paper from ONP. This pulp showed the pulp yield of 76.8%, brightness of 50.2% ISO and tensile index of 21.1 Nm/g. By the bleach with P and PY stages, the brightness of the pulps increased up to 60.3% ISO and 61.8% ISO, respectively. When blended with MOW (57.3% ISO) or WL (76.2% ISO), the brightness of the former increased up to 58.5% ISO, the latter up to 63.6% ISO. The strengths of pulp blended with WL were higher than those of fractionated pulp from 100% ONP, however there was no difference in strengths between fractionated pulp and blended pulp wth MOW. While the addition of softener improved the softness of paper, but it decreased strengths of pulp and extended dispersing time in water.

• 한국포장학회지
• /
• 제11권1호
• /
• pp.33-40
• /
• 2005

This study was carried out for effective utilization of recycling resources to investigate the repulping conditions of car air filter waste paper and to evaluate the application into corrugating medium papermaking by blending these repulped pulps. Car air filter waste paper was made of virgin BKP and it was dipped into phenol resin solution. It was well disintegrated by laboratory Valley beater with 10%(basis on oven-dried pulp weight) NaOH addition and defoamer usage. The optimal temperature, beating consistency and treatment time were mainly $40^{\circ}C$, 1% and $30{\sim}40$ minutes, respectively. Handsheets were prepared with various blending ratios between air filter recycled pulp and KOCC. In the case of $10{\sim}20%$ substitution with air filter recycled pulp, physical properties reductions as compressive strength and burst strength of sheets were lower than others. These results showed more favour than the partial substitution of KOCC for corrugating medium even though some strength reduction of paper. It was also observed that the waste water of air filter recycling was not affective to environmental problems.

• Journal of Nutrition and Health
• /
• 제18권4호
• /
• pp.312-317
• /
• 1985

본 연구는 오이의 추출물에서 Ascorbic acid oxidase 활성의 존재유무를 검토하고 이 효소의 특성을 규명하여 Ascorbic acid의 손실을 최소화하는 과채류의 조리, 가공조건을 설정하는데 도움이 되고저 시도 되었다. 오이에서 Ascorbic acid oxidase를 분리해 내어 그 특성을 연구한 결과 시간의 변화에 따른 Ascorbic acid oxidase의 활성은 처음 10분 동안 Ascorbic acid 감소량이 가장 현저하였으며 Ascorbic acid oxidase의 최저 pH는 6.5로 나타났다. 또한 온도의 변화에 따른 Ascorbic acid oxidase의 활성은 $40^{\circ}C$까지는 계속 증가하다가 최적온도 $40^{\circ}C$를 기점으로 그 이상의 온도에서는 감소하였다. 본 연구에서 고찰한 결과를 실제로 적용시켜 오이 juice를 제조하여 온도 및 pH변화에 따른 Ascorbic acid 함량을 비교한 결과 냉장온도에서 $4^{\circ}C$의 물로 blending한 것이 실온의 물로 blending한 것보다 Ascocbic acid 함량이 높았으며 orang juice (pH 34) 를 첨가하여 blending한 것은 Ascorbic acid 함량이 감소되지 않은 것으로 나타났다. 따라서 야채 juice조제시 저온에서 처리하고 pH 를 3.9 이하로 낮추며 juice 조제후 바로 섭취하는 것이 Ascorbic acid의 파괴를 최소화할 수 있는 바람직한 방법이라고 사려된다.

• 한국수자원학회논문집
• /
• 제51권3호
• /
• pp.221-233
• /
• 2018

최근 기후변화로 인한 국지성 호우 및 태풍 피해가 자주 발생하고 있다. 이와 같은 피해를 저감하기 위해서는 정확한 강우의 예측과 홍수량 산정이 필요하다. 그러나 지점 및 레이더 강우 시 공간적 오차를 포함하고 있고, 유출 모형에 의한 유출수문곡선 역시 보정을 실시하더라도 관측유량과 오차를 가지고 있어 불확실성이 존재한다. 따라서 본 연구에서는 확률론적 강우 앙상블을 생성하여 강우의 불확실성을 확인하였다. 또한 유출 결과를 통해 수문 모형의 불확실성을 확인하였고, 블랜딩 기법을 이용하여 하나의 통합된 유출 수문곡선을 제시하였다. 생성된 강우앙상블은 강우강도 및 지형적인 영향으로 레이더가 과소 관측이 될 때, 강우 앙상블의 불확실성이 큰 것을 확인하였고, 블랜딩 기법을 적용하여 산정된 최적 유출 수문곡선은 유출모형의 불확실성을 크게 줄이는 것으로 나타났다. 본 연구 결과를 활용한다면, 정확한 홍수량 산정 및 예측을 통해 집중호우로 인한 피해를 줄일 수 있을 것으로 판단된다.