• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.799-806
• /
• 1995

In industrial field, a large volume of regenerants (acid and caustic soda) and their washing effluents are regularly disposed off from the water demineralization plant during regeneration of the ion-exchanger units. Of these waste effluents, a part of the wash water discharged from the single bed Anion and Mixed Bed units can be utilized at a certain stage of their washing cycles when its conductivity is fallen down and becomes considerably less than that of the input raw water. The main aim of this specific waste effluent utilization is to dilute the TDS concentration of the input raw water (fed into the single bed ion-exchanger units) by blending. The achievement is the increase of the longevity of the production cycles of the I.E. units along with the improvement of the production quality and decrease of the regeneration frequencies. As a result, regenerant consumption would be saved because of the reduction of ionic load in feed water which will ultimately reduce the water purification cost. At the same time, the environment pollution will also be protected to a considerable extent. This operational measure is quite effective and useful specially where high TDS water is demineralized only by single bed ion-exchangers. In such case, the water treatment plant is very often found to suffer from both production quality and quantity in addition to carrying out of random and restless regenerations. Proper reuses of the aforesaid wash water effluents of the Anion and MB units excellently minimizes the difficulties experienced in practice. This paper contains the utilities and techniques of reuses of the different kinds of waste effluents of the industrial water treatment plant in addition to the specific reuses of the post-regeneration wash waters of the Anion and MB ion-exchanger units.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1114-1119
• /
• 2004

The biofilms on pipe walls in water distribution systems are of interest since they can lead to chlorine demand, coliform growth, pipe corrosion, and water taste and odor problems. As such, the study described in this paper is part of an AWWARF and Tampa Bay Water tailored collaboration project to determine the effect of blending different source waters on the water quality in various distribution systems. The project was based on 18 independent pilot distribution systems (PDS), each being fed by a different water blend (7 finished waters blended in different proportions). The source waters compared were groundwater, surface water, and brackish water, which were treated in a variety of pilot distribution systems, including reverse osmosis (RO) (desalination), both membrane and chemical softening, and ozonation-biological activated carbon (BAC), resulting in a total of 7 different finished waters. The observations from this study consistently demonstrated that unlined ductile iron was more heavily colonized by a biomass than galvanized steel, lined ductile iron, and PVC (in that order) and that the fixed biomass accumulation was more influenced by the nature of the supporting material than by the water quality (including the secondary residual levels). However, although the bulk liquid water cultivable bacterial counts (i.e. heterotrophic plate counts or HPCs) did not increase with a greater biofilm accumulation, the results also suggested that high HPCs corresponded to a low disinfectant residual more than a high biofilm inventory. Furthermore, temperature was found to affect the biofilms, plus the AOC was important when the residual was between 0.6 and 2.0 mg $Cl_2/l$. An additional aspect of the current study was that the potential of the exoproteolytic activity (PEPA) technique was used along with a traditional so-called destructive technique in which the biofilm was scrapped off the coupon surface, resuspended, and cultivated on an R2A agar. Both techniques indicated similar trends and relative comparisons among the PDSs, yet the culturable biofilm values for the traditional method were several orders of magnitude lower than the PEPA values.

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.103-107
• /
• 2002

High purity water soluble chitosans (WsCs) were employed as a flocculant to remove heavy metal ions from wastewater of industrial plating wastewater treatment complex. Their weight average molecular weights and polydispersities were 272,000~620,000 g/mol and 1.4~1.9 range, respectively and were readily soluble in water in the pH range of 3~11. Heavy metal ions such as chromium, iron and copper were removed well by WsCs. When WsCs was blended with either sodium N, N-diethyldithiocarbamate trihydrate (SDDC$_{T}$) or sodium salicylate (SSc), the removal efficiency was further increased primarily due to the excess amount of hydrophilic sulfonic and carboxylic groups. Especially, in the case of WsCs-SSc the remaining chromium and copper concentrations were 0.1 mg/L and 9.5 mg/L, which are 1/15 and 1/3 compared with that of pure WsCs, respectively. The former is within the acceptable limit, but the latter is not. Therefore, the effective copper flocculant remains to be studied.d.

• Membrane and Water Treatment
• /
• v.11 no.4
• /
• pp.237-245
• /
• 2020

The effects of the mixed two solvents, Dimethylacetamide (DMAc) and Dimethylformamide (DMF), and Polyethylene glycol (PEG) and Polyvinylpyrrolidone (PVP) as additives on performance of Polyvinylidene fluoride (PVDF) membranes were studied. Initially, PEG200 was used as a primary additive at fixed percentage of 5% wt. PVP was then blended with PEG200 in different concentrations. PVDF and DMAc were used as polymer and solvent in the casting solutions, respectively. To control the diffusion rate of PVP in the presence of PEG200 and PVP blend, mixtures of DMAc and DMF were used as the mixed solvent in the casting solutions. Asymmetric PVDF membranes were prepared via phase inversion process in a water bath and the effects of two additives and two solvents on the membrane morphology, pure water flux (PWF), hydrophilicity and rejection (R) were investigated. Attenuated Total Reflection Fourier Transform Infrared Spectra (ATR-FTIR) analysis was used to show the residual PVP on the surface of the membranes. Atomic Force Microscopy (AFM) was utilized to determine roughness of membrane surface. The use of mixed solvents in the casting solution resulted in reduction of PVP diffusion rate and increment of PEG diffusion rate. Eventually, PWF and R values reduced, while porosity and hydrophilicity increased.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.679-690
• /
• 1996

Acrylic copolymer was synthesized from 2-dimethylaminoethyl methacrylate and alkylmethacrylate containing long chain hydrocarbon group. To facilitate emulsification in water, acrylic copolymer was treated with acetic acid, and therefore acetated acrylic copolymer was produced. Acetated acrylic copolymer was perfectly emulsified in water and showed increased emulsion stability. Polymer as a cement dispersion agent(PDCM-PSD) was prepared by blending the newly synthesized acetates acrylic copolymer with sodium gluconate, oleic acid, and triethanolamine. The applicability of the blended polymer was examined, and it was found that the effects of dispersion and water-proof(0.3~0.5) were excellent.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.128-140
• /
• 2016

In this study, dyeability of Urtica Dioica L. extract, which is relatively less studied, was measured. The extract of this plant was used to dye cellulose and protein fiber to check its usage as a natural green dye. Three different methods were used to produce extract. Dried Urtica Dioica L. was extracted with 100% ethanol, 50% ethanol with 50% distilled water and 100% distilled water. Then dyeing solution was obtained by blending with distilled water at 1-to-1 ratio. The maximum dyeability was obtained when 100% ethanol extract of dried Urtica Dioica L. used to dye fabrics at 60 degrees celsius for 60 minutes without mordant treatment. Cotton, rayon, wool and silk were dyed and dyeability for each fiber was measured for color difference value then compared to its control. The results show that dyeability of rayon and dyeability of wool are stronger, and that when color position for each mordant is measured, color difference is most diverse on cotton with pre-mordant treatment. Color fastness to wash, perspiration and rubbing crockmeter were superb, but color fastness to light was low, therefore, additional study on this is needed to improve. Urtica Dioica L. is now expected to be used practically as green color dye as well as medicinally and edible.

• Journal of the Korean Applied Science and Technology
• /
• v.8 no.1
• /
• pp.9-20
• /
• 1991

In the preparation of acrylic water repellent(EDLWC). quaternized 2-diethylarrunoethylmethacrylate-stearylmethacrylate copolymer (DSACC) and quaternized 1-Iaurovlbis(aminoethyl)-2-dodecylimidazoline(LDDIC) were selected as a basic resin and the improving agent such as softening effect and hydrostatic pressure of the water repellent. EDLWC was prepared by blending waxes and emulsifier for waxes with various ratio to DSACC and LDDIC. As the results of the measurement of water repellency, washable, tear strength and crease recovery to polyester-cotton(P/C) blended fabrics treated with EDLWC only or addition of textile finishing resin, the physical properties were increased. Sodium acetate was the most effective catalyst in the water repellency among the various kinds of catalyst. and the reasonable concentration of the catalyst was 1. 4 wt%. EDLWC was confirmed as durable water repellent with the results of making little difference of water repellency as ${\pm}5$ point after and before washing. The reaction mechanism between P/C blended fabrics and EDLWC in the presence of catalyst was proposed. And also, the longitudinal view of the P/C blended fabrics treated with water repellent was observed with scanning electron microscope.

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.269-276
• /
• 2012

The surface characteristics and performance of PTFE (polytetrafluoroethylene) hollow fiber membranes have been systematically investigated at lab- and pilot-scale to assess their application to membrane-bioreactor, particularly for integrating wastewater reclamation and rainwater harvesting. The PTFE membrane expressed some surface features, such as hydrophobicity, which might enhance membrane fouling. However, lab-scale performance and cleaning experiments under various conditions demonstrated that the PTFE membrane could produce the desirable water flux with good cleaning efficiency, implying easy operation and maintenance due to superior chemical resistance of PTFE membranes. Most of effluent water qualities were met with Korean standard for discharge and reuse, except color. Color level was further reduced by blending with rainwater at 75:25 ratio. Based on the lab-scale experimental results, the pilot plant was designed and operated. Pilot operation clearly showed sTable performance with satisfactory water quality, suggesting that PTFE membrane could be applied for decentralized MBR integrated with rainwater use.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.199-204
• /
• 2006

Recently, The sludge water of ready mixed concrete has been investigated because of environmental pollution and disposal cost. So, sludge water is partially reused as mixing water. However, if sludge water is reused too much that would influence the qualify of concrete. KS specification limits the amount of sludge content up to 3% of cement weight. In this study, the effect of ready mixed concrete sludge on the characteristics of concrete is compared to raise the reuse ratio of sludge of ready mixed concrete. According to this experiment results, as blending ratio of re-mi-con sludge increases, workability is decreases. However, the sludge of ready mixed concrete water have a positive effect on the strength development. The drying shrinkage and the resistance of freezing and thawing have a minor effect.

• Culinary science and hospitality research
• /
• v.7 no.3
• /
• pp.179-191
• /
• 2001

The effects of whole wheat flour on the Rheological Properties of dough gassing power of yeast S.cerevisiae and breadmaking properties were studied. The blending ratios of whole wheat flour to bread making flour were 0, 25, 50, 75 and water absorption in the farinography increasedlinerly from 62.5%in 100% bread making flour and 77.5% in 100% whole wheat flour. The hardness and cohesiveness of dough prepared with optimum moisture content was constant regardless of the blending ratio of whole wheat flour. whole wheat flour had no effect on the total gas production or the internal gas content in the dough at a constant moisture level but had detrimental effect on the loaf volume. In a dough at the optimum moisture level, whole wheat flour increased the two former parameters sensory evaluation indicated that the replacement in the range of 25 to 50% with whole wheat flour at the optimum moisture level was acceptable