• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.83-90
• /
• 1999

Although the chitosan has many functional properties due to its cationic amino groups, the application of chitosan in foods is limited by its poor water solubility, bitter taste and astringency. This study was conducted to investigate physicochemical and sensory properties of chitosan hydrolysates in various molecular weights obtained by ultrafiltration after enzymatic hydrolysis. As molecular weight decreased, the solubility of chitosan hydrolysates increased, while the viscosity and emulsion stability decreased. High molecular weight chitosan hydrolysates (>30 kDa) exhibited 800% of fat binding capacity, while low molecular weight ones $(3{\sim}30\;kDa)$ showed 500% of fat binding capacity. Water soluble chitosan hydrolysates exhibited no color differences. Freeze-thaw stability of chitosan hydrolysates was good, without variations among fractions. Cholesterol binding capacity of chitosan hydrolysates was changed from 24% to 36% with increasing molecular weights. From sensory evaluation of chitosan hydrolysates, it was found that bitterness, astringency, chemical flavor and fish flavor of chitosan hydrolysates were very weak.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1216-1220
• /
• 1999

The effects of low-temperature blanching on the physical properties of chestnut powder were studied. Chestnuts were blanched in water for 15, 30 and 60 min., each at three temperatures viz. $45^{\circ}C,\;55^{\circ}C$ and $65^{\circ}C$. The particle size of chestnut powder was prepared smaller than 60 mesh$(250\;{\mu}m)$. Higher blanching time and temperature increased water binding capacity(WBC) of chestnut powder. Water soluble index(WSI) was the highest for chestnuts blanched at $65^{\circ}C$ for 30 min. As with water binding capacity(WBC), swelling power of chestnut powder increased with increasing blanching time and temperature but solubility showed an reduction by increasing blanching temperature. In Brabender amylographic examination, peak viscosity of chestnut powder showed great change, but the gelatinization temperature showed no significant differences by blanching conditions.

• Korean journal of food and cookery science
• /
• v.28 no.6
• /
• pp.871-881
• /
• 2012

To compare the physicochemical and gel properties of mung bean starches prepared by different purification methods, starches from Korean Eohul variety and Chinese mung bean (MB) with or without hull using alkaline solution or water as solvent were purified. The optimum conditions for making muk were investigated. Apparent amylose and total dietary fiber contents, water binding capacity, solubility and pasting properties by RVA were analyzed. The characteristics of starch gels (10% dry basis) were measured for 0 and 4 day stored at $4^{\circ}C$. The protein and ash contents were significantly different (p<0.05) and lowered in starch from dehulled MB using alkaline solution. The starches from dehulled MB using alkaline solution showed the lowest color differences. Apparent amylose contents of Eohul and Chinese starches showed 37.06-39.03% and 31.57-32.74%, respectively. Chinese starch was higher in water binding capacity but lower in solubility at $85^{\circ}C$ than others. Peak, trough, cold, and breakdown viscosities of Eohul starch were higher than those of Chinese one. Mung bean starch gel made immediately exhibited clear and glossy appearance but became whiter like milk. The crystallinities of starch and starch gel showed A and B types, respectively. The hardness, gumminess, and resilience of starch gel made immediately and hardness, cohesiveness, gumminess, and resilience of 4 day stored gels were different significantly (p<0.05). Especially, Eohul starch gels purified from hulled MB showed higher resilience (bending property) and hardness. Therefore, it was suggested that high quality muk would be made using MB starch purified from hulled Korean mung bean using water as solvent.decreased in contain more than 20% of SGP added groups. The optimal concentration of SGP was found in the range of less than 10%.

• Culinary science and hospitality research
• /
• v.23 no.4
• /
• pp.116-124
• /
• 2017

This study was investigated quality characteristics of gluten-free noodles added guar gum and basil seed gum (BSG). Gluten-free noodles were prepared using corn flour and corn starch and added 1% and 2% of guar gum and basil seed gum. Water binding capacity was measured by centrifuge, and moisture content was obtained by moisture analyzer. Color of noodles was measured from the midsection of noodles. Water absorption of noodles was calculated by weight of uncooked and cooked noodles. pH of noodles was measured by pH meter. Texture and tensile strength were obtained by rheometer. SPSS 12.0 program was used for significant differences by Duncan's multiple range test. Water binding capacity of noodles was the highest in 2% basil seed gum but 1% guar gum was the lowest. Moisture content was not different in uncooked noodles, but 1% guar had the highest moisture content in cooked noodles. Water absorption of noodles was high in basil seed gum group. pH of noodles was more increased in guar gum additions than basil seed gum additions. For hardness, control had the lowest as 16.09 N, but 2% guar gum showed the highest as 28.40 N. Tensile strength of noodles was increased by adding gums. These results suggested that 1% basil seed gum could be good materials for manufacturing gluten-free noodles in order to improve quality characteristics.

• Korean journal of food and cookery science
• /
• v.21 no.3 s.87
• /
• pp.326-338
• /
• 2005

The purpose of this study was to investigate the effect of isolate soybean protein (ISP) and rice flour on the characteristics of rice noodles. As the levels of ISP and rice flour increased, water binding capacity, swelling power of rice noodle increased. In RVA, pasting temperature, Set back showed an increasing tendency with peak viscosity, holding viscosity, break down, final viscosity of rice noodle increased as the level of rice flour by decreasing. Peak time was not significant. The weight, water absorption and volume of the cooked noodles were decreased. The turbidity of rice noodle increased. The Hunter color L, a-values of the dried rice noodle decreased. Cooked rice noodle quality increased with by decreasing the level of rice flour level. B-values of dried rice noodle and cooked rice noodle increased. Texture profile analysis of cooked rice noodle showed an increase of hardness. Adhesiveness, cohesiveness of cooked rice noodles decreased with by decreasing the level of ISP and rice flour. Gumminess, springiness, chewiness were increased. Sensory evaluation, showed gloss was increased. Hardness and chewiness of the cooked ice noodles were increased. Adhesiveness was not significant. Color and overall- acceptability were increased. Relationship between sensory and mechanical examinations (The overall quality of sensory examination for gloss) had a negative correlation with the mechanical examination for b-value (p.0.05). Mechanical examination for b-value had a positive correlation of sensory evaluation for hardness, chewiness, which had negative correlation of sensory evaluation for color. Scanning Electron, Microscopes observation of rice noodle was showed that the size of the hole grown was increased with by increasing the level of rice flour. From the above results, the most advisable mixture ratio of rice noodle evaluation was can be derived as follows: 171g rice flour, 114g wheat flour, 15g soybean protein isolate, 120ml water, and 6g salt.

• Animal cells and systems
• /
• v.1 no.1
• /
• pp.77-80
• /
• 1997

DOantrolene is a primary specific therapeutic drug for prevention and treatment of malignant hyperthermia symptoms. The mechanisms underlying the therapeutic effects of the drug are not well understood. The present study aimed at the characterization of the effects of azumolene, a water soluble dantrolene analogue, on ryanodine binding to sarcoplasmic reticulum (SR) from normal and malign::lnt hyperthermia susceptible (MHS) swine muscles. Characteristics of $[^3H]ryanodine$ binding were clearly different between the two types of SR. Kinetic analysis of eH]ryanodine binding to SR in the presence of $2{\mu}M$ $Ca^{2+}$ showed that association constant $(K_{ryanodine}_7$ is significantly higher in MHS than normal muscle SR $(2.83 vs. 1.32{\times}10^7 M^{-1}$, whereas the maximal ryanodine binding capacity $(B_{max})$ is similar between the two types of SR. Addition of azumolene $(e.g. 400{\mu}M)$ did not significantly alter both $K_{ryanodine}$ and $B_{max}$ of $[^3H]$ryanodine binding in both types of SR, indicating that the azumolene effect was not on the ryanodine binding sites. Addition of caffeine activated $[^3H]$ ryanodine binding in both types of SR, and caffeine sensitivity was significantly higher in MHS muscle SR than normal muscle SR $(K_{caffeine}:3.24 vs. 0.82 {\times} 10^2 M^{-l}). Addition of azumolene $(e.g.400{\mu}M)$ decreased Kcaffeine without significant change in $B_{max}$ in both types of SR suggesting that azumolene competes with caffeine binding site(s). These results suggest that malignant hyperthermia symptoms are caused at least in part by greater sensitivity of the MHS muscle SR to the $Ca^{2+}$ release drug(s), and that azumolene can reverse the symptoms by reducing the drug affinity to $Ca^{2+}$ release channels.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.6
• /
• pp.837-842
• /
• 2010

The physicochemical properties of coarse semolina (CS), medium semolina (MS) and fine semolina (FS) were investigated to research method applied in noodles processing of Korean wheat semolina. Large particle (>250 ${\mu}m$) was over 75% in all semolinas, except for FS, and the particle distribution of MS and durum semolina (DS) was similar. Crude protein and crude ash were the highest in DS followed by CS>MS>FS. Crude lipid of DS was the lowest among samples and CS, MS and FS were not significantly different. L value was high in semolina with small particle distribution and starch damage was the lowest in DS followed by FS>MS. Amylose content was high in DS (29.80%) and FS (29.08%) with small particle distribution. Water binding capacity was the highest in DS, and FS showed the highest water binding capacity among Korean wheat samples. Solubility and swelling power were noticeably high in FS with low starch damage and small particle distribution. In scanning electron microscope (SEM), FS and MS showed distribution of separated fine particles of flours. From these results, the physicochemical properties of semolina showed many differences by grinding methods. FS should be applied in noodles processing through additional examination about characteristic of noodle making.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.269-275
• /
• 1989

The study was conducted to compare the components such as proximate composition, total dietary fiber(TDF) content, acid detergent fiber(ADF) content, lignin, water binding capacity(WBC), amino acid composition and lipid components from brown Job's tears, dehulled Job's tears, brown Yeomjoo and bran of Job's tears. The results from this study are summerized as follows: Total dietary fiber(TDF) content of Job's tears, brown Job's tears, brown Yeomjoo and bran of Job's tears were 2.70%, 3.86%, 4.33% and 13.3% each. Water-binding capacity(WBC) of TDF and ADF were $2.63{\pm}0.02g\;H_2O/g$ TDF and $5.89{\pm}0.15g\;H_2O/g$ ADF each. In amono acids composition of samples, glutamic acid content was the highest and the next was leucine. Chemical score of leucine in dehulled Job's tears was very high(189), in contrast lysine was very low$(22{\sim}23)$ So lysine was a first limitting amino acid in Job's tears and Yeomjoo. Neutral lipid contents were 90.89%-96.55%, glycolipid contents were 2.35%-7.48% and phospholipid contents were very low. The major fatty acids of lipid fractions were palmitic acid. oleic acid and linoleic acid.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.5
• /
• pp.1119-1126
• /
• 2017

Quality characteristics of commercially available soybean and mung-bean flours in Korea were evaluated relative to product information such as bean content, price, chromaticity, proximate composition, water binding capacity, swelling power and solubility. Origin of raw materials was 23 in domestic products and 19 in imported products. The price of the product was 3.48 times more for raw soybean flour, 3.34 times more for fried soybean flour, and 3.47 times more for mung bean flour compared to imported soybean. In the domestic products, the lightness of raw soybean flour was higher than roasted soybean flour. The redness and yellowness of roasted soybean flour were higher than raw soybean flour. Moisture content of raw soybean flour was higher than roasted soybean flour, and crude fat, crude protein and carbohydrate content were higher in imported soybean flour. Ash and crude protein contents of mung bean were slightly higher than imported products. Water binding capacity of roasted soybean flour in domestic products was higher than raw soy flour, and there was no significant difference in solubility and swelling power. Correlation between quality characteristics of commercially available soybean and mung-bean flours products was found to be highly significant among measured items, except for solubility.

• Korean journal of food and cookery science
• /
• v.31 no.4
• /
• pp.405-412
• /
• 2015

To develop a color stable and fine bamboo leaf powder (BLP) as a functional green biomaterial, bamboo leaf (BL) purchased from Sasa borealis and cultivated in Damyang, Jeonnam was treated with different conditions and BLP was evaluated. The four treatments comprised of boiling in water, in zinc chloride, sodium bicarbonate, and vinegar solutions, BLP4 was treated with 2% $ZnCl_2$ for 1 h, BLP5 was treated with 1% $ZnCl_2$ for 2 h, and BLP6 was treated with 1% $ZnCl_2+10%$ NaCl for 1 h. The particle size distribution, ash content, water binding capacity, and color change after heating in acidic solution were compared to commercial fine green tea (GTP) and bamboo leaf powders (CBLP). The particle size (cumulative 90%) of BLP was finest in BLP4 followed by BLP6 < BLP5 < GTP < CBLP. The water binding capacity of GTP was the highest and that of BLP was negatively correlated with particle size. After heating in acidic solution, the color of commercial GTP and CBLP changed from bright green to olive green, but the treated BLPs remained bright green. Especially, the -a (greenness) values for the commercial powders decreased from 11.2-13.6 to 3.1-3.8, while those of the treated BLPs did not change.