• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.677-683
• /
• 2005

In this work, the effect of additives such as solvent, sodium dodecyl sulfate and NaCl on microemulsion phase behavior and flux removal efficiency in systems containing commercial alkyl ethoxylates nonionic surfactant was investigated. The addition of a n-hydrocarbon as a solvent produced on O/W (Oil/Water) microemulsion phase over a wider range of temperature and cosurfactant to surfactant ratios. Especially, the addition of n-hexadecane to the surfactant system, which was the most hydrophobic solvent among the solvents used in this study, produced a microemulsion phase over a wide range of temperatures and promoted formation of a microemulsion phase at lower temperatures. The candidate for cleaner samples, prepared from phase behavior experiments, showed excellent removal efficiency for abietic acid at $40^{\circ}C$. These data suggested the potential applicability of hydrocarbons to actual cleaner formulations.

• Preventive Nutrition and Food Science
• /
• v.14 no.2
• /
• pp.142-147
• /
• 2009

In this study, the selenium (Se) accumulations of soybean sprouts and mungbean sprouts treated with various concentrations of Se-solutions were evaluated, as part of a broader effort to produce Se-enriched variants of the plants. Four levels of sodium selenate ($Na_{2}SeO_{4}$)-dissolved solutions (i.e. 0, T0; 6, T1; 60, T2; and $600{\mu}g/mL$, T3) were prepared and sprayed onto the plants during cultivation. The effect of different spraying periods on Se accumulation was also assessed by watering plant groups once a day for periods of one, two, or three days. Se solution remaining on the surfaces of the plants was washed out by spraying with distilled water on the final day of cultivation. However, the increase of Se accumulation in the plants was found to depend on both Se-concentration and watering period, and the soybean sprouts were determined to accumulate Se more effectively than the mungbean sprouts. Additionally, with regard to Se accumulation in the plants, the period of application of Se solution was determined to be more important than the concentration of the Se solution applied. The averaged total levels of Se-enrichment in whole soybean sprouts at T0, T1, T2, and T3 were 0.26, 65.86, 179.62, and $525.12{\mu}g/dry$ matter (DM) g, respectively, and the relative equations relating Se enrichment in soybean sprouts (Y) against watering days (X) were Y=32.505X-36.17 (T1), Y=88.46X-92.04 (T2), and Y=251.11X-254.9(T3). The averaged total levels of Se-enrichment in the whole mungbean sprouts at T1, T2, and T3 group were 0.05, 3.64, and $101.43{\mu}g/DM$ g, respectively, and the relative equations relating Se enrichment (Y) to watering days (X) for mungbean sprouts were Y=1.67X-1.3467 at T1 and Y=48.035X-46.907 at T2. The results of this study suggest that soybean sprouts and mungbean sprouts enriched with bioavailable Se can be produced on a large scale by Se supplementation, allowing for the development of healthy functional foods such as Se-enriched mungbean sprout soups and salads, Se-enriched functional drink and food additives, and selenium tablets to promote health.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.11
• /
• pp.1699-1704
• /
• 2007

This experiment was carried out to evaluate the effects of adding encapsulated-glucose, glucose, sorbic acid or prefermented juice of epiphytic lactic acid bacteria (FJLB) on the fermentation quality and residual mono- and disaccharide composition of Italian ryegrass (Lolium multiflorum Lam) silages. The additive treatments were as follows: (1) control (no addition), (2) encapsulated-glucose addition at 0.5% for glucose, (3) glucose addition at 1%, (4) sorbic acid addition at 0.1%, (5) FJLB addition at a theoretical application rate of $2.67{\times}10^5$ CFU (colony forming unit) $g^{-1}$, on a fresh weight basis of Italian ryegrass. Although control and encapsulated-glucose treatments had higher contents of butyric acid (33.45, 21.50 g $kg^{-1}$ DM) and ammonia-N/Total nitrogen (114.91, 87.01 g $kg^{-1}$) as compared with the other treated silages, the fermentation in all silages was clearly dominated by lactic acid. This was well indicated by the low pH (4.38-3.59), and high lactic acid/acetic acid (4.39-22.97) and lactic acid content (46.85-121.76 g $kg^{-1}$ DM). Encapsulated-0.5% glucose and glucose addition increased lactic acid/acetic acid, and significantly (p<0.05) decreased ammonia-N/total nitrogen, and the contents of butyric acid and total volatile fatty acids (VFAs) as compared with the control. However, there were higher butyric acid and lower residual mono-and di-saccharides on the two treatments as compared with sorbic acid and FJLB addition, and their utilization efficiency of water soluble carbohydrates (WSC) was lower than that of both sorbic acid and FJLB additions. Sorbic acid addition showed the lowest content of ethanol and ammonia-N/total nitrogen, and the highest content of residual fructose and total mono-and disaccharides as well as the higher lactic acid/acetic acid value. Sorbic acid addition decreased the loss of mono-and disaccharides, and inhibited the activity of clostridial and other undesirable bacteria, and greatly increased the utilization efficiency of fermentable substrates by epiphytic LAB. FJLB addition had the lowest pH value and the highest lactic acid content among all additive treatments, with the most intensive lactic acid fermentation occurring in FJLB treated silage. This resulted in the faster accumulation of lactic acid and faster pH reduction. Sorbic acid and FJLB addition depressed clostridia or other undesirable bacterial fermentation which decreased the WSC loss and saved the fermentable substrate for lactic acid fermentation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.9
• /
• pp.1309-1315
• /
• 2012

A total of 140 weaning pigs ((Landrace${\times}$Yorkshire)${\times}$Duroc, BW = $6.47{\pm}0.86$ kg) were used in a 5-wk growth trail to determine the effects of phytoncide supplementation on growth performance, nutrient apparent total tract digestibility (ATTD), blood profiles, diarrhea scores and fecal microflora shedding. Pigs were assigned randomly by BW into 5 treatments, dietary treatments were: i) NC, basal diet; ii) PC, NC+0.05% tylosin; iii) EO, NC+0.1% essential oil; iv) PP, NC+0.2% PP (phytoncide with 2% citric acid), and v) PA, NC+0.2% PA (phytoncide). Each treatment had 7 replicate pens with 4 pigs per pen. All pigs were housed in pens with a self-feeder and nipple drinker to allow ad libitum access to feed and water throughout the experimental period. During 0 to 2 wks, supplementation with essential oil and PA decreased (p<0.05) G/F compared with the other treatments. During 2 to 5 wks, supplementation with PA led to a higher (p<0.05) G/F than the other treatments. At 2 wk, ATTD of dry matter (DM) and gross energy (GE) in EO treatment were decreased (p<0.05) compared with NC treatment. Dietary PC treatment improved (p<0.05) ATTD of DM and E compared with the CON group, and PA and PP treatments showed a higher (p<0.05) ATTD of E than that in NC treatment. Pigs fed phytoncide (PA and PP) had a greater (p<0.05) ATTD of DM than those of NC and EO treatments at 5 wk. Moreover, supplementation with phytoncide elevated (p<0.05) the concentration of immunoglobulin (IgG) in blood at 2 wk. The inclusion of EO, PP and PA treatments showed a greater (p<0.05) amount of fecal Lactobacillus compared with CON group. However, no difference (p>0.05) was observed in diarrhea scores among treatments. In conclusion, phytoncide can elevate feed efficiency, nutrient digestibility, and improve the fecal Lactobacillus counts in weaning pigs. Our results indicated that the phytoncide could be used as a good antibiotics alternative in weaning pigs.

• Journal of Food Hygiene and Safety
• /
• v.20 no.1
• /
• pp.64-68
• /
• 2005

An analytical method of nine synthetic foods colors in Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), and USA were compared. Contents of water insoluble matter in synthetic food colors tested were not different by general test methods of various organs. Contents of chloride and sulfate salts in Food Green No.3, Food Red No.3, Food Blue No.2, and Food Yellow No.4 slightly differed in various methods, and but up to the standard, and general test methods of JECFA and USA needed far more time. For the measurement of arsenic contents in food colors, colorimetric method in Korea and Japan, and silver diethyldithiocarbamate colorimetric method in USA and JECFA were used, but the standards of them were different. Content of heavy metals was up to the standard, but the methods were used colorimetric method in Korea, atomic absorption method in Japan, and both methods in JECFA and USA.

• Resources Recycling
• /
• v.10 no.3
• /
• pp.51-59
• /
• 2001

Impurities removal from waste carbon black was carried out to produce high-grade carbon black. A large amount of hydrophilic carbon black is produced as a byproduct of the hydrogen production process by flame decomposition of water. Due to its impurities content such as sulphur, iron, ash, etc., it can only be used as low-grade carbon or burnt out. High-grade hydrophilic carbon black is 3~5 times more expensive than oil-based carbon black because of high production cost associated with process complexly and pollutant treatment. Hydrophilic carbon is normally used for conductive materials for batteries, pigment for plastics, electric wire covering, additives for rubber, etc. In these applications, impurity content must be blow 1 fe. In this study, magnetic separation, froth flotation and ultrasonic treatment were employed to remove impurities from the low-grade hydrophilic carbon black. Results showed that the ash, iron and sulphur content of product decreased to less than 0.01 wt.%, 0.01 wt.% and 0.3 wt % respectively and the surface area of product was about 930 $m^2$/g for conductive materials.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.3
• /
• pp.97-103
• /
• 1972

In this paper, the effects of some additives to the quality of fish cake such as salt, polyphosphate, and starch were tested. Besides, that of washing and alterative heating procedure were also discussed. From the result of quality test by measuring jelly strength and sensory evaluation the product was quite palatable to common, and the addition of salt and starch as 3 and 5 to 15 percent respectively, resulted in the best jelly strength of the product, it was markedly enforced when a small amount of polyphosphate ($0.3\%$) was added. It is suggested for a processing method of carp meat fish cake that meat is to be bleached by wasing at least 8 times repeatedly with tenfold tap water by volume of meat, and that the meat is previously chilled at 2 to $3^{\circ}C$ for so minutes and ground thoroughly with addition of 3 percent of salt, 5 to 15 percent starch, and 0.3 percent polyphosphate, and finally heat processed by two stages: at first, heated for 1 hour at $35^{\circ}C$ and alteratively heated for 30 minutes at $90^{\circ}C$ as the final.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.11-21
• /
• 2013

The Geyoungju Ca-bentonite with dry density of 1.6 g/$cm^3$ has been considered as a standard buffer material for the disposal of high level waste in KAERI disposal system design. But it had relatively lower thermal conductivity compared with other surrounding materials, that was one of key parameters to limit the increase of the disposal density in the disposal system. In this study, various additives were selected and mixed with the Ca-bentonite in different mixing methods in order to increase the thermal conductivity from 0.8 W/mK to 1.0 W/mK. As an additive, CNT (Cabon Nano Tube), graphite, alumina, CuO, and $Fe_2O_3$ were selected, which are chemically stable and have good thermal conductivity. As mixing methods, dry hand-mixer mixing, wet milling and dry ball mill mixing were applied for the mixing. Above all, the ball mill mixing was proved to be most effective since the produced mixture was most homogeneous and showed higher increase in the thermal conductivity. From this study, it was confirmed that the thermal conductivity for the Geyoungju Ca-bentonite could be improved by adding small amount of highly thermal conductive material to 1.0 W/mk. In conclusion, it was believed that the experimental results will be valuable in the disposal system design if the additive effects on the swelling and permeability on the compact bentonite are also approved in further studies.

• Applied Biological Chemistry
• /
• v.36 no.1
• /
• pp.51-57
• /
• 1993

For the effective untilization of mackerel as a food source, the most desirable processing conditions of mackerel based burger were investigated. The mackerel was beheaded, gutted, washed with tap water and deboned with the meat seperator. Then it was substituted with 15% pig meat and mixed with additives such as 18.3% emulsion curd, 3.0% soybean protein, 2.0% sodium chloride, 2.0% sugar, 0.1% monosodium glutamate, 0.2% polyphosphate, 0.4% sodium bicarbonate, 0.5% beef extract powder, 0.3% onion powder, 0.1% ginger powder and 0.1% garlic powder to a mixed meat. The seasoned mackerel based meat was molded to a thickness of 10 mm and a diameter of 80 mm, fried for 2 min. The examined mackerel based burger was superior to mackerel based burger by another processing conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.843-851
• /
• 2003

An experiment was conducted to investigate the effects of pre-wilting Bana grass (Pennisetum purpureum x P. americanum) herbage under sunny conditions for 0, 6, 18, 24, 32 and 48 h and ensiling it with maize meal. Four levels of maize meal(viz., 0, 5, 10 and 15% on fresh weight (Fw) basis) were tested. The experiment had a split-plot design. Wilting increased the concentration of water soluble carbohydrates (WSC) significantly (p<0.001) on a Fw basis, although there were no significant changes on DM basis. Unwilted grass contained $36.1g{\cdot}WSC{\cdot}kg^{-1}{\cdot}Fw$ ($127.6g{\cdot}kg^{-1}{\cdot}DM$) and this increased to $64.1g{\cdot}WSC{\cdot}kg^{-1}{\cdot}Fw$ ($116.7g{\cdot}kg^{-1}{\cdot}DM$) after 48 h of pre-wilting. Wilting also increased the DM content of herbage significantly (p>0.001) from 250 to $620g{\cdot}kg^{-1}$, between 0 and 48 h respectively. The concentration of fermentation end-products decreased (except butyric acid) and pH increased when the period of wilting increased, indicating that fermentation was restricted. In particular, lactic acid content declined from 50.8 to $26.2g{\cdot}kg^{-1}{\cdot}DM$ (p<0.01) and the residual WSC contents of silage increased from 2.7 with fresh herbage to $18.1g{\cdot}kg^{-1}{\cdot}DM$ with 48 h of wilting (p<0.001). Rapid wilting for 24 h, to a DM of $450g{\cdot}kg^{-1}$ was optimum since important increases in pH, residual WSC and DMD occurred at this level of wilting. Acetic acid, butyric acid and ammoniacal-N contents were lowest with 24 h of wilting. There were no significant interactions between length of wilting and the incorporation of maize meal. Wilting had a greater influence on fermentation than the incorporation of maize meal. Addition of maize meal facilitated fermentation by increasing forage DM content and reducing effluent production. In addition, the maize meal increased DMD. It was concluded that maize meal should generally be incorporated at a level of 5% on fresh weight basis.