• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1410-1414
• /
• 2018

Magnetic nanoparticles (MNP) have attracted considerable interest in many fields of research and applied science due to their impressive properties. In the past, especially biomedical problems have promoted the development of MNPs. For technical applications e.g. wastewater treatment and absorption of electromagnetic waves, the existing synthesis approaches are too expensive and/or the producible quantities are too low. In this work we present a method for simple preparation of size-controlled magnetic iron oxide nanoparticles by electroerosion dispersion (EED) of carbon steel in water. We describe the synthesis method, the laboratory installation and discuss the structural, chemical and electromagnetic properties of the synthetized EED powders as well as their applicability for microwave absorption compared to other available ferrite powders.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.3
• /
• pp.319-324
• /
• 1996

The functional properties of protein recovered from red crab (Chitinonecetes opiiie) processing in water (RCP) were examined and compared with those of soybean protein isolate at pH 2~10 in water and NaCl solu5ion. The solubilities of RCP and SPI were miniumu at pH 4, the isoelectric point and increased significantly at lower or higher than pH 4. Solubilities in NaCl solution for both proteins decreased with incr NaCl concentration increase at all pH ranges. Emulsion capacity for both proteins was also minimum at pH 4 and increased as protein concentration increased from 2 to 6%. Emulsion capacity of RCP was higher than these of SPI at pH 6∼10 and all protein concentrations. Emulsion stability showed a similar trend to that of emulsion capacity. RCP had higher oft absorption capacity and lower water absorption capacity than SPI.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.75-79
• /
• 2004

Organic coatings are widely used to control of the corrosion of a steel structure. The water in coatings may cause the coatings to swell, leading to the degradation of the coatings. In addition, water affects the permeation of oxygen and other corrosive agents, and consequently, the presence of such substances at coating-metal interface promotes corrosion of the metal substrate. In this study, the anticorrosive properties of 4 types of coating, such as epoxy-epoxy, epoxy-urethane, urethane-epoxy, urethane-urethane, were evaluated. The evaluation tests were conducted under cyclic water-absorption/desorption conditions, consisting of alternative exposure to diluted 0.001M-LiCl(a$H_2O$≒1) and concentrated 10M-LiCl(a$H_2O$≒0.15). The anticorrosive performance of coatings was found to decrease in the order of urethane-urethane > urethane-epoxy > epoxy-epoxy coating.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.262-268
• /
• 2003

Organic coatings are widely used to control the corrosion of steel structure. The water in coatings may cause swelling or solvation of coatings, leading to the degradation of coatings. In addition, water affects the permeation of oxygen and other corrosive agents, and consequently the presence of such substances at coating-metal interface promotes corrosion of metal substrate. In this study, the anticorrosive properties of 4 types of coating, such as epoxy-epoxy, epoxy-urethane, urethane-epoxy, urethane-urethane, were evaluated. The evaluation tests were carried out under cyclic water-absorption/desorption conditions, consisting of alternative exposure to diluted 0.001M-LiCl($a_{1120}{\fallingdotseq}1$) and concentrated l0M-LiCl($a_{1120}{\fallingdotseq}0.05$). The anticorrosive performances of coatings were found to decrease in the order of urethane-urethane> urethane-epoxy> epoxy-epoxy coating.

• Korean Journal of Remote Sensing
• /
• v.16 no.4
• /
• pp.315-325
• /
• 2000

Observations were made to validate ocean color algorithms in the Ulleung Basin, East Sea in May 2000. Small scale and meso-scale surveys were conducted for the validation of ocean color products (nLw: normalized water-leaving radiance and chlorophyll concentration). There were discrepancies between SeaWiFS and in situ nLw showing the current aerosol models of standard SeaWiFS processing software are less than adequate (Gordon and Wang, 1994). Applying the standard SeaWiFS in-water algorithm resulted in an overestimation of chlorophyll concentration. This is because that CDOM absorption was higher than the estimated chlorophyll absorption. TSS concentration was also high. Therefore, the study region deviated from Case 1 waters. The source of these materials seems to be the entrainment of coastal water by the Tsushima Warm Current. Study of the bio-optical properties in other season is desirable.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.25-30
• /
• 1991

Chicken liver was enzymatically hydrolyzed with an alkaline protease and determined the optimal conditions of reaction temperature and time, pH and enzyme to substrate ratio(E/S ratio) for possible utilization as a protein supplementary ingredient. The functional properties of hydolysate measured were water and oil absorption capacity, emulsifying activity and viscosity and sensory properties were also evaluated. It was found that hydrolysis at $60^{\circ}C$ and pH 8.0 were most effective and the degree of hydrolysis increased with increasing E/S ratio. A decrease in water and oil absorption capacity and an increase in viscosity were found during hydrolysis. The lowest emulsifying activity and highest water absorption were measured for 1/2 hour-hydrolysate and little difference was found for those treated more than 1 hour. The sensory characteristics of odor showed no significant difference among the chicken liver hydrolysates while the brightness increased and red decreased significantly(p<0.01) as the hydrolysis proceeded.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1754-1759
• /
• 2010

Because the stone cultural properties located outdoors, they have been altered and deteriorated in external appearance due to environmental factors such as acid rain, extreme change in temperature, and salts. Damage to stone cultural properties is accelerated particularly due to recent industrial development and environmental pollution. An experimental study was conducted to evaluate the effect of environmental contaminants(sea water and air pollutants such as, $SO_2$, NO, $CO_2$) on the weathering of granite. And as part of the developing of conservation method, $TiO_2$ catalyst was prepared and tested. After expose a granite to sea water and air pollutants, the mineral compositions of the tested granite surface were lower then that of the fresh granite. And absorption capacity of the weathered granite was steadily increased. From these results, it was expected that granite could be weathered by sea water and air pollutants. For the $TiO_2$ coated granite, absorption capacity was slightly enhanced compared to the $TiO_2$ non-coated granite. Therefore, the $TiO_2$ coating method tested in this study considered to be a viable method to assist in the conservation of granite from environmental contaminants.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.1
• /
• pp.119-126
• /
• 2004

Generally, reinforced concrete is one of the most commonly used structural materials and it prevents corrosion of steel bar by high pH of interior, But, as time elapsed, reinforced concrete structure become deteriorated by many of combined deterioration factors and environmental conditions. And, there are large number of deteriorate mechanism of the reinforced concrete structure and it acts complexly. It is recognized that steel bar corrosion is the main distress behind the present concern regarding concrete durability. In this study, to institute combined deterioration environments, established acceleration condition and cycle for combined deterioration environments has a resemblance to environments which are real structures placed. After that to confirm corrosion properties of reinforced concrete due to permeability with covering depth and types of surface cover under combined deterioration environments, measured carbonation velocity coefficients, chloride ion diffusion coefficients, water absorption coefficients, air permeability coefficients and electric potential, corrosion area ratio, weight reduction, corrosion velocity of steel bar. The results showed that an increase in age also decrease carbonation velocity coefficients, increase Chloride ion diffusion coefficients and increases water absorption coefficients. As well, an increase in age also increases corrosion of steel bar. Data on the development of corrosion velocity of steel bar with types of surface cover made with none, organic B, organic A, inorganic B, and inorganic A is shown. As well, permeability and corrosion velocity of steel bar with covering depth is superior to 10mm than 20mm. And it is confirmed permeability and corrosion properties of steel bar are closely related.

• Fashion & Textile Research Journal
• /
• v.25 no.1
• /
• pp.119-126
• /
• 2023

This study aimed to determine the effects of relative humidity and fiber properties on the moisture permeability of multilayer systems by measuring water vapor transmission in the overlapping condition of various fabrics. The results confirmed that the property of the fabric in contact with the humid environment affects the moisture permeability. If the layer facing the humid environment is hydrophobic and the layer facing the dry environment is superhydrophobic, water vapor transmission increases by up to 17.8% compared to the opposite conditions. Comparing the correction values of the water vapor transmission reflecting the thickness of the specimen under the multilayer condition showed that permeability was higher when the hydrophilic or hydrophobic layer was facing the humid environment. The opposite was true from the "push-pull" effect of absorption mechanism. In the case of moisture permeability, the more hydrophilic the surface facing the humid environment, the more permeable that water vapor diffuses and passes through. It was concluded that the "pull-push" effect, in which water vapor diffuses widely through the hydrophilic facing a humid environment and then passes through the hydrophobic layer, contributes to the improvement of permeability. Permeability differed according to the multilayer overlapping condition. When the relative humidity was high, the "pull-push" effect was insignificant. This is caused by water droplets absorption after the partial migration of water due to condensation. These results suggest that the overlapping conditions and properties of fabrics should vary depending on heavy sweating or not.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2349-2351
• /
• 1999

In this paper, the variable absorption rates and DC dielectric breakdown strength of epoxy composites were measured at boiling absorption condition in order to observe the influences of moisture in out door use. Also, in order to improve withstand voltage properties at moisture absorbtion condition. IPN (interpenetrating polymer network) method which had been already reported, was introduced and the influence was investigated. As a result, it was confirmed that the moisture absorption rate was increased and DC dielectric breakdown strength was degraded with boiling time and filler content increasing. On the other hand, it was confirmed that moisture absorption rate and DC dielectric breakdown strength degrading rate were lowered by the improvement of adhesion strength In IPN specimens.