• 방사선산업학회지
• /
• 제5권4호
• /
• pp.377-382
• /
• 2011

Poly(vinyl alcohol) (PVA) is an interesting material with good biocompatibility, high elasticity and hydrophilic chacrateristics. In this study, crosslinked hydrogels based on PVA, and poly(acrylic acid) (PAAc) were prepared by gamma-ray irradiation. PVA and PAAc powders were dissolved in deionized water, and then irradiated by a gamma-ray with a radiation dose of 50 kGy to make hydrogels. The hydrogels were then annealed in an oven at $120^{\circ}C$ for 10 min, 30 min and 50 min under nitrogen atmosphere. The properties of a hydrogel such as gel fraction, swelling behavior, thermogravimetric analysis (TGA) and adhesive strength as a function of PAAc content and annealing time were investigated. The gel fraction decreases with decreasing PAAc content and increasing annealing time. The thermal behaviors have shown different patterns according to the annealing time. The adhesive strength increases with increasing PAAc content.

• Macromolecular Research
• /
• 제17권5호
• /
• pp.307-312
• /
• 2009

Core-shell hydrogel nanocomposite was fabricated by encapsulating a silica-gold nanoshell (SGNS) with poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAM-co-AAc) copolymer. The oleylamine-functionalized SONS was used as a nanotemplate for the shell-layer growth of hydrogel copolymer. APS (ammonium persulfate) was used as a polymerization initiator to produce a hydrogel-encapsulated SGNS (H-SGNS). The amounts of NIPAM (N-isopropylacrylamide) monomers were optimized to reproduce the hydrogel-encapsulated SGNS. The shell-layer thickness was increased with the increase of polymerization time and no further increase in the shell-layer thickness was clearly observed over 16 h. H-SGNS exhibited the systematic changes of particle size corresponding to the variation of pH and temperature, which was originated from hydrogen-bonding interaction between PNIPAM amide groups and water, as well as electrostatic forces attributed by the ionization of carboxylic groups in acrylic acid.

• Membrane and Water Treatment
• /
• 제6권5호
• /
• pp.411-422
• /
• 2015

Membrane modification by different concentrations of acrylic acid has been described. Grafting of acrylic acid to the surface of a polypropylene membrane was obtained by a Fenton-type reaction. Membrane permeability seemed to have been dependent on the value of pH in the solution. To explain tendency, a simple theoretical model was developed. The model incorporates explicitly statistical conformations of a polyacid chain grafted onto the pore surface. The charged capillary model with a varying diameter for porous membranes was then used to evaluate the permeability of the membrane. It has been shown both theoretically and experimentally that the permeability of a grafted membrane depends on the pH of the solution.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.169-176
• /
• 2006

Acrylic adhesives for automobiles protection were prepared by emulsion polymerization. Monomers used were n-butyl acrylate(BA), acrylonitrile (AN), butyl methacrylate(BMA), glycidyl methacrylate(GMA), and acrylic acid (AA). Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was kept at 200 rpm. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, when each 0.03 mole of GMA and AA was introduced, the adhesion properties and various above mentioned resistances of the prepared adhesives were satisfied the standard for automobiles.

• 한국응용과학기술학회지
• /
• 제11권2호
• /
• pp.113-120
• /
• 1994

Amphoteric surfactants were synthesized by the cyclization of 1-(2-hydroxyethyl)-2-undecyl-2-imidazoline [I] with acrylic acid ethyl ester. Compound [I] was easily hydrolyzed with water, especially in the presence of a alkali, to afford amidoamines. After [I] was hydrolyzed, the reaction mixture was allowed to react with acrylic acid ethyl ester and then soapoinfied. Only sodium salts of N- -(2-carboxyethyl)-N'-(2-hydroxyethyl)aminoethyl]dodecanoyl amide[III] was obtained. However, when the reacton of [I] with acrylic acid ethyl ester was carried out in the presence of water, followed by soapnification, ring cleavage of [I] occurred at 2, 3 position, different from hydrolysis of [I] where the cleavage occurred at 1, 2 position, to give sodium salts of N-[N'-(2-carboxyethyl)aminoethyl]-N-(2-hydroxyethyl)dodecanoyl amide [IV] and N-[N', N'-bis(2-carboxyethyl)aminoethyl]-N(2-hydroxyethyl)dodecanoyl amide [V] as main products.

• Macromolecular Research
• /
• 제16권3호
• /
• pp.189-193
• /
• 2008

Thermal cross-linking method of poly(vinyl alcohol) (PVA) using poly(acrylic acid) (PAA) was carried out on PVA/PAA hydrogels. The level of gelation was measured in the PVA/PAA hydrogels with various PAA contents. The swelling behavior at various pHs showed that the swelling kinetics and water contents of the PVA/PAA hydrogels reached equilibrium after 30 h, and the time to reach the equilibrium state decreased with increasing PAA content in the hydrogel. The water content increased with increasing pH of the buffer solution. The permeation and release of the drug were tested using indomethacin as a model drug. The permeated and released amounts of the drug increased with decreasing the PAA content because of the low free volume in the hydrogel due to the higher cross-linking density. The kinetic profile of drug release at various pHs showed that all samples reached the equilibrium state within the 5 h.

• 접착 및 계면
• /
• 제9권1호
• /
• pp.16-21
• /
• 2008

이온성작용기를 갖는 수분산 폴리우레탄은 내수성이 약하기 때문에 수분에 노출된 환경에서의 사용이 제한된다. 폴리우레탄과 아크릴 고분자로 구성된 하이브리드 에멀젼을 수분산 폴리우레탄(PUD)을 emulsifier로 사용하고 아크릴 단량체들을 에멀젼 중합하여 제조하였다. 먼저 양이온성 PUD의 합성은 IPDI, PTMG1000, MDEA, AA가 사용되었고, 아크릴 단량체는 MMA와 n-BA를 사용하여 공중합하였다. PUD와 아크릴 단량체들의 중합비율에서 아크릴 단량체의 양이 증가할수록 내수성 및 인장강도가 좋아졌다. 결론적으로 단순 혼합된 에멀젼보다 하이브리드된 에멀젼이 더 우수한 물성을 나타내었다.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.575-580
• /
• 2007

Water-soluble, chiral conducting, poly(diphenylamine) (PDPA) nanocomposites were synthesized by chemical oxidative polymerization of diphenylamine in the presence of poly(acrylic acid) (PAA) as a template and camphor sulphonic acid (CSA) as the chiral inductor, Composites were formed as stable aqueous dispersions under different experimental conditions, such as DPA to PAA molar ratios, PAA molecular weight, etc. Circular dichroism(CD) spectra of the composites indicated the induction of chirality to PDPA. Compared to simple chiral PANI, the PDPA/PAA/CSA nanocomposites showed a different Cotton effect. The appearance of a CD band in the composite was complimentary to the bisignate, exciton-coupled band in the UV-Visible spectrum. FTIR spectra indicated the intimate mixing of PDPA and PAA.

• 공업화학
• /
• 제16권2호
• /
• pp.212-216
• /
• 2005

아연도금 강판의 부식을 방지하기 위하여, 방청제로서 사용하고 있는 벤조트리아졸을 유기화제로 사용하여 이를 Na-montmorillonite (Na-MMT)에 삽입시켰다. 이것을 XRD로 관찰한 결과 벤조트리아졸의 삽입으로 인하여 MMT의 층간 거리가 증가하였음을 보여주고 있다. 그리고 코팅액으로 사용하기 위하여 벤조트리아졸이 삽입된 MMT를 이용하여 수용성 poly(ethylene-co-acrylic acid) (PEA) 나노복합재료를 제조하였다. 나노복합재료는 PEA 매트릭스에 실리케이트가 단일층으로 잘분산되어 있는 박리형 나노복합재료임을 보여주고 있다. 이것을 인용하여 아연도금강판에 코팅하여 염소분무 시험한 결과 금속의 내식성을 현저히 증가시켰다. 이러한 결과는 PEA 매트릭스에 균일하게 분산되어 있는 실리케이트 층에 의한 산소투과도 감소와 방청제의 효과에 의한 것이다.

• 공업화학
• /
• 제9권3호
• /
• pp.451-456
• /
• 1998

식품가공 공장에서 1차 가공되고 버려지는 게껍질을 화학처리하여 chitin을 제조한 후, 탈아세틸화하여 chitosan(Cs)을 제조하여 이 chitosan에 acrylic acid, maleic acid, fumalic acid를 그라프트공중합시켜 CsAa, CsMa와 CsFa를 합성하였다. 제조한 Cs, CsAa, CsMa와 CsFa의 구조 확인은 FT-IR, 전자현미경, X-Ray회절분석기로 하였으며, 응집제로서의 가능성을 검토하기 위하여 제지공장 폐수를 대상으로 응집제의 투입량을 변화시켜 본 결과 투과도, COD, SS의 제거율이 투입량 40ppm에서 제일 좋았으며, chitosan 보다 그라프트중합체를 사용했을 때의 제거율이 월등히 개선되었다. pH 변화에 따라서는 투과도, COD, SS의 제거율이 pH 5에서 가장 우수한 결과를 나타내었다. Chitosan 보다 그라프트공중합체인 CsAa, CsFa와 CsMa가 월등히 우수한 제거율을 나타내고 있는 것은 chitosan에 카르복시기를 가진 단량체가 공중합됨으로서 양쪽성을 띠기 때문으로 예측된다.