• 한국건설순환자원학회지
• /
• 제12권1호
• /
• pp.39-43
• /
• 2017

• 한국막학회:학술대회논문집
• /
• 한국막학회 2000년도 춘계 총회 및 학술발표회
• /
• pp.63-66
• /
• 2000

• 대한환경공학회지
• /
• 제34권5호
• /
• pp.326-334
• /
• 2012

본 연구는 최근 수 환경에서의 과불화화합물의 배출원 중 하나로 인식되고 있는 폐수처리장을 대상으로 이들 물질의 처리 공정별 물질량 흐름 및 거동을 예측하고자 수행되었다. 시료채취는 여름철과 겨울철에 유입수, 중화조유출수, 1차침전지 유출수, 포기조 유출수, 2차 침전지 유출수, 최종 방류수, 탈수여액, 1차 슬러지, 농축슬러지, 탈수 슬러지를 각각 3일간 채취하였으며, 채취한 후 동일한 비율로 혼합하여 분석용 시료로 하였다. 총 10개 물질을 대상물질로 하여 분석한 결과, 물 시료 중 농도는 PFOS (perfluorooctanesulfonate)가 N.D.~26.29 ng/L, PFOA (perfluorooctanoate)가 N.D.~38.15 ng/L로 검출되었으며 기타 PFNA (Perfluorononanoate)가 N.D.~36.79 ng/L, PFHxS (perfluorohexanesulfonate)가 N.D.~24.36 ng/L로 나타났다. 슬러지 시료의 경우, PFOS가 6.82~59.37 ng/g, PFOA가 0.13~0.37 ng/g, PFDS (perfluorodecanesulfonate)가 N.D.~0.83 ng/g으로 검출되었다. 각 처리 공정별 물질량 흐름을 관찰한 결과, 과불화화합물의 대부분이 유입되는 양보다 유출되는 양이 더 많은 것으로 나타났는데 이는 전구물질들이 처리공정을 거치면서 생물학적 분해에 의해 과불화화합물의 발생원으로서 작용하고 있기 때문인 것으로 판단된다.

• 물과 미래
• /
• 제29권5호
• /
• pp.185-202
• /
• 1996

개발된 하천유지유량 결정 방법을 금강유역 본류 구간(대청댐 조정지에서 강경까지)에 적용하여 항목별 필요유량, 그리고 5개구간 및 대표지점에 대한 하천유지유량과 하천관리유량을 산정하였다. 갈수량은 평균갈수량을 대상으로, QUAL2E 모형을 사용하여 환경기초사설 완비여부에 따라 수질을 예측하고, 어류는 금강유역의 9개 대표어종에 대해 필요유량을 산정 하였다. 그리고 하천경관은 공주와 부여 지점에 대해, 수운은 자연 하도 방식, 물놀이는 현재와 장래에 이루어질 여가활동을 대상으로 평가하였으나, 기타 항목은 평가하지 않았다. 대체적으로 자연상태를 유지하고 있는 상류 구간은 생태계 보전 등과 같은 하천의 자연적 기능에 필요한 유량이 지배적이고, 하류는 수질 악화에 따른 수질 보전과 수상이용 등과 같은 인위적 기능에 필요한 유량이 지배적인 것으로 나타났다. 특히 목표 년도에 따라 수질보전에 대한 필요유량은 환경기초시설 완비 여부에 따라 하천유지유량과 하천관리유량이 큰 차이를 보여 하수처리에 의한 수질보전이 시급한 것으로 나타났다.

• 상하수도학회지
• /
• 제22권1호
• /
• pp.39-48
• /
• 2008

This study was carried out to investigate the characteristics of the pollutant discharge from non-point source and to estimate the unit loads of the pollutant discharge from the upper watershed of Seomjin Dam during rainy season. The upper watershed of Seomjin Dam is located in the middle of Jeonbuk province is formed two tributaries mainly. A sub-branch stream of those tributaries is Imsil stream of which flow rate is about 13% of the main stream of Seomjin reservoir normally. On the basis of measurement result in this study, the water quality of Imsil stream was fluctuated highly and the quantity of measured pollutant discharge was higher than the value calculated with the proportion of flow rate during dry season. On the contrary, during rainy season the mean values of flow rate and water quality were higher than the quartile according to the statistical analysis. That means rainfall can influence strongly on the water quality of the upper watershed of Seomjin reservoir. Among the several criteria of water quality, SS discharge was most sensitive to the flow rate variation of stream, which was fluctuated in proportion of rainfall, basically. It was evaluated the event mean concentration (EMC) of non-point source pollutants depending on rainfall events as well. Though the pollutant discharge unit of Imsil stream was lower than the main stream of Seomjin reservoir, the EMC value of Imsil stream was higher than the main stream of Seomjin reservoir.

• 대한환경공학회지
• /
• 제27권3호
• /
• pp.337-341
• /
• 2005

It is difficult to use average sewage water quality as a design parameter for the individual sewage wastewater treatment plant(ISWTP), because sewage water quality is very various according to the building use type. So, in this study, we estimated daily, seasonal and weekly trend of sewage water quality and flow rate in various kind of building to comprehend operating state of ISWTP. The sewage water quality and flow rate were higher in the business building than household building. The seasonal difference of the water quality was not detected but that of flow rate was high. The flow rate of the sewage in the business building was higher in summer than in other seasons and in weekend than in weekday. The treatment efficiency of IWSTP was about $70{\sim}80%$ with BOD, $40{\sim}50%$ with TN and TP, which was very low. The unit loads of the individual house were 36.05 gpcd with BOD, 37.91 gpcd with SS, 23.91 gpcd with T-N, and 7.90 gpcd with T-P respectively, and those values were higher than other studies. It is because, as distinct from other studies, sewage water quality was monitored at the inlet point of the IWSTP in this study. We can use this results as an one of basic parameters for the design of IWSTP.

• 상하수도학회지
• /
• 제23권3호
• /
• pp.345-352
• /
• 2009

The purpose of inlet baffle is to distribute the flow uniformly over the entire cross-sectional area of the sedimentation basin. The goal when designing this baffle is to achieve some head loss while keeping the velocity gradients through the ports equal to the velocity gradient in the end of the flocculator, so as to not break up the flocs. Sedimentation tank performance is strongly influenced by hydrodynamic and physical effects such as inlet design. This study was conducted to evaluate the effect of open ratio of the inlet baffle on hydraulic behavior within a rectangular sedimentation basin using CFD simulation and ADV technique. In order to verify the CFD simulation, we measured the factual velocity at 18 points in the full-scale sedimentation basin at Y water treatment plant. Good agreement was obtained between the CFD predictions and the experimentally measured data. From the simulation results of the existing basin with 7.4 % open ratio, it was investigated that extreme decrease in velocity occurred in the middle of basin. Since then, flow features was unstable. The region which the velocity decrease rapidly moved forward to the flow direction in proportion to the increase of inflow velocity. Also, it was investigated that the flow characteristic of 6.0 % open ratio was significantly different from 7.4 % open ratio at the same configuration condition. These results are a clear indication that inflow momentum and open ratio are the parameters affecting the characteristics of hydraulic patterns. The influence of these parameters on the sedimentation performance requires further study.

• 상하수도학회지
• /
• 제29권5호
• /
• pp.551-557
• /
• 2015

The TMDL (Total Maximum Daily Load) has been used to determine the water quality target. LDC (Load Duration Curve) based on hydrology has been used to support water quality assessments and development of TMDL. Also FDC (Flow Duration Curve) analysis can be used as a general indicator of hydrologic condition. The LDC is developed by multiplying FDC with the numeric water quality target of the factor for the pollutant of concern. Therefore, this study was to create LDC using the stream flow data and numeric water quality target of BOD and T-P in order to evaluate the pollutant load characterization by flow conditions in Heukcheon stream. When it is to be a high-flows condition, BOD and T-P are necessary to manage. BOD and T-P did not satisfy the numeric water quality target for both seasons (spring and summer). In order to meet the numeric water quality target in Heukcheon stream, management of non point source pollutant is much more important than that of point source pollutant control.

• 상하수도학회지
• /
• 제27권6호
• /
• pp.761-770
• /
• 2013

This study was carried out to forecast the flow rate and water quality at the inlet of the Saemangeum bay in Korea using the SWMM(Storm Water Management Model) and the WASP(Water Analysis Simulation Program), and to analyze the impacts of pollutant loading from non-point source on the water quality of the bay. The calibration and validation of flow rate and water quality were performed using those from two monitoring points in the Mankyeong river administrated by Korean Ministry of Environment as part of the national water quality monitoring network. When the river flow rate was calibrated and validated using the rainfall intensities during 2011-2012, $R^2$ (i.e., coefficient of determination) was ranged from 0.91 to 0.96. For water qualities, it was shown that $R^2$ of BOD(Biochemical Oxygen Demand) was ranged from 0.56 to 0.86, and $R^2$ of T-N(Total Nitrogen) was from 0.64 to 0.75, and $R^2$ of T-P(Total Phosphorus) was from 0.67 to 0.89. The integrated modeling system showed significant advances in the accuracy to estimate the water quality. Finally, further simulations showed that annual average flow of the river running into the bay was estimated to be $1.439{\times}10^9m^3/year$. The discharged load of BOD, T-N, and T-P into the bay were anticipated to be 618.7 ton/year, 331.5 ton/year, and 40.4 ton/year, respectively.

• 상하수도학회지
• /
• 제27권2호
• /
• pp.261-272
• /
• 2013

Algae boom (Red tide) in south coastal area of Korea has been appeared several times during a decade. If algae boom appears in the desalination plant, media filter and UF filter are clogged quickly, and the plant should be shutdown. In general, Algae can be removed from water by flotation better than by sedimentation, because of the low density of algal cell. The purpose of this study conducts the CFD simulation of DAF flotation basin to apply the design of the dissolved air flotation with ball filter in the Test Bed for SWRO desalination plant. In this study, Eulerian-Eulerian multiphase model was applied to simulate the behavior of air bubbles and seawater. Density difference model and gravity were used. But de-sludge process and mass transfer between air bubbles and seawater were ignored. Main parameter is hydraulic loading rate which is varied from 20 m/hr to 27.5 m/hr. Geometry of flotation basin were changed to improve the DAF performance. According to the result of this study, the increase of hydraulic loading rate causes that the flow in the separation basin is widely affected and the concentration of air is increased. The flow pattern in the contact zone of flotation basin is greatly affected by the location of nozzle header. When the nozzle header was installed not the bottom of the contact zone but the above, the opportunity of contact between influent and recycle flow was increased.