• Journal of environmental and Sanitary engineering
• /
• v.19 no.1
• /
• pp.24-36
• /
• 2004

This study is to investigate the present condition of waste disposal establishment and to analysis problems which could be produced at location selection formalities of waste disposal establishment. It proposed building methods of waste disposal establishment to lead spontaneous participation of local resident according to case analysis of waste disposal establishment. There are research results; i) Opposition of inhabitants was the majority of reason at the business abandonment or delay of waste disposal establishment. Therefore agreement formation course with local inhabitants is most important position. ii) Many estimate have been needed for waste disposal establishment, but support estimate of government was 30-50% that is really low compare with other environmental establishment. So that it need to increase of government estimate. iii) Location collection is carried out based on law and final collected location must be executed without delay of relation business as soon as possible. iv) Standard of location collection has to divide into small, middle and large size and to apply with same rule according to divided location. v) It must be change public subscription before and location selection after and maintain continuance of information offer to local inhabitants and offered information. vi) after building of waste disposal establishment for solving distrust of waste disposal establishment. It must be planed and carried on useful support countermeasure to local inhabitants in actuality.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.211-219
• /
• 2019

Since improper management practices of solid medical waste (SMW) could potentially result in serious health risks and environmental problems, it is very important to properly treat and dispose of the medical wastes. In this study, current practices of SMW management from storage to final disposal stage in 12 health care facilities (HCFs) of Burundi were investigated using the official government reports. The results showed that 75% and 92% of HCFs used uncovered wheelbarrows and trucks for on-site or off-site SMW transportation, respectively, indicating that most transportation equipment and waste workers are not safely protected. The results also showed that 92.8% of SMW (15,736.4 ton) from all 12 HCFs were inappropriately disposed of through uncontrolled land disposal and incineration. If pharmaceutical wastes and discarded medical plastics (29.5% of SMW) can be separated and treated properly, the treatment costs can be reduced and resource savings can be achieved. Raising awareness of healthcare workers and general public about potential health effects arising from improper SMW management, sufficient financial and human resources for the treatment facilities (especially incinerators), and effective regulations and guidelines for transportation and treatment of SWM are some of the major tasks for safe and sustainable medical waste management in Burundi.

• Science & Technology Policy
• /
• v.2 no.20 s.20
• /
• pp.26-28
• /
• 1992

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.43-47
• /
• 2001

The waste home appliances including television sets, refrigerators, washing machines and air conditioners have increasingly received environmental concerns in Taiwan. In light of the enforcement of Waste Disposal Act (WDA), the Taiwan Environmental Protection Administration (EPA) has certified 60 recycling/storage facilities and given permission for qualified companies to build six treatment plants around the island. Now the recycling and well treatment home appliances are estimated to be 3,342,369 units until May 31, 2001. This paper describes the present status of waste home appliance recycle and its treatment in Taiwan. The principle guidelines and policies regarding recycling, resource recovery and environmental concerns are presented.

• Journal of the Korean Professional Engineers Association
• /
• v.15 no.2
• /
• pp.43-44
• /
• 1982

What I would like to expect about this mater is that Korea would develop unique techniques of the waste water which are most suitable to social and other relevant conditions of that country, not entirely following models of sewerage construction of U.S.A. or European countries or Japan. Some cements will be made in the followings: (1) The investigation for the diffusion of seperated simple public sewerag, not the large scale sewerage treatment plant. (2) The plan for non-mixed treatment of lining waste water and industrial waste water. (3) Suggestion for "a man of ability" at the university education to cultivate a technologist of facilities and the elemental watchman at the sewerage maintenance.

• Journal of Environmental Impact Assessment
• /
• v.6 no.2
• /
• pp.137-152
• /
• 1997

The siting process of municipal solid waste treatment facility consists of a structured set of policies that guide the implementation of waste management goals. The main problems of siting process are the social and political context or the community opposition. During the past, the traditional siting process has been obsolete in most pans of the country, so public officials and researchers have tried to experiment with new policies and procedures. A number of controversial issues offer insight into the factors that are related to the local residents opposition to new waste treatment facilities. The purpose of this case study focused on the establishment of criteria in the site selection of waste treatment facilities which can carry out resources recovery. incineration and landfill simultaneously. That is to say. the main points are to make concrete the quantification standards of assignment and take an objective allotment scale according to the assessment factors. The summarized results are as follows; 1. To promote the site selection based on the guideline such as rational. objective and due process of law, it is desirable to inform the local residents the methods of assessment in advance. 2. Totally 20 factors for the site selection are divided into 3 categories such as living environment characteristics, technological location characteristics and socio-economic factors. And the supposed magnitude of weight in all items are equally applied. 3. In regard to 20 assessment factors, the allotment of point is distributed by the specific location characteristics. Namely to make the assessment easily, each factors are set the scale from 1 to 5 points en masse along the data which are acquired in the region.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.762-769
• /
• 2018

This study was carried out to examine the improvement plan by analyzing the characteristics of imported wastes, operation rate, and benefits of energy recovery for incineration facilities with a treatment capacity greater than 50 ton/day. The incineration facility capacity increased by 3,280 tons over 15 years, and the actual incineration rate increased to 2,783 ton/day. The operation rate dropped to 76% in 2010 and then rose again to 81% in 2016. The actual calorific value compared to the design calorific value increased by 33.8% from 94.6% in 2002 to 128.4% in 2016. The recovery efficiency decreased by 29% over 16 years from 110.7% to 81.7% in 2002. Recovery and sales of thermal energy from the incinerator (capacity 200 ton/day) dominated the operation cost, and operating income was generated by energy sales (such as power generation and steam). The treatment capacity increased by 11% to 18% after the recalculation of the incineration capacity and has remained consistently above 90% in most facilities to date. In order to solve the problem of high calorific value waste, wastewater, leachate, and clean water should be mixed and incinerated, and heat recovery should be performed through a water-cooled grate and water cooling wall installation. Twenty-five of the 38 incineration facilities (about 70%) are due for a major repair. After the main repair of the facility, the operation rate is expected to increase and the operating cost is expected to decline due to energy recovery. Inspection and repair should be carried out in a timely manner to increase incineration and heat energy recovery efficiencies.

• Environmental and Resource Economics Review
• /
• v.10 no.3
• /
• pp.323-344
• /
• 2001

This study analyzes the relative efficiencies of three types of non-landfill treatment of food wastes; recycling to fertilizers or animal feeds, reducing the size of food wastes, and fermentation of food wastes. Unlike previous studies our study incorporates not only usual inputs and outputs but also emissions of pollutants such as odor and noise generated by the treatment facilities into the analysis. A nonparametric method suggested by Fare et al. (1989) has been used to estimate the relative efficiencies of facilities incorporating emission of pollutants. The results show that recycling is more efficient than the other two treatment methods. It is also shown that the usual models that do not incorporate the environmental aspects of the treatment facilities derive a biased conclusion on the relative efficiencies.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.493-498
• /
• 2008

The several water resources are showed recently the various pollution types due to the industrialization and the disarranged district development. The living waste water, plant waste water and so are contaminated continuously and the recycling water is concerned highly to save the cost and to improve the environment as the general people. The dust and the heavy metal in the air and the acid rain are contaminating the river water and the underground water. The clean environment is on the rise to the general people and is to be the social problems. There is going to complement and repair the water supplying and fire extinguishing pipeline to save the construction cost and improve the environment in the construction facilities parts. Therefore, in this paper the recycling water treatment/supply apparatus using the living waste water is considerated technically and is raised on the practical uses.

• Clean Technology
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2023

Waste explosives such as useless ammunition discharged from the military and coproduced useless explosives during the manufacturers production process have been continuously produced. These are difficult to dispose with normal waste treatment facilities due to the dangers of fire and explosion. An open burning or an open detonation at military designated disposal facilities is a classical treatment method for the dangerous explosives. The classical method raises various environmental problems by the emission of hazardous materials. An air pollution by the emission of hazardous gases such as SO_x and NO_x, soil and water contaminations by the accumulation of non-biodegradable heavy metals, are representative pollution examples. To overcome these problems, various processes for eco-friendly waste treatment methods have been developed, and some processes have already been operated in some countries. In the current report, various eco-friendly disposal processes for waste explosives or harmful materials, and their advantages and disadvantages are documented to suggest future development directions for reducing the hazardous substances by the treatment processes.