• Membrane and Water Treatment
• /
• v.8 no.6
• /
• pp.529-541
• /
• 2017

A multi-effect air gap membrane distillation (ME-AGMD) module for pesticide wastewater treatment is studied with internal heat recovery, sensible heat of brine recovery, number of stages and the use of fresh feed as cooling water in a single module is implemented in this study. A flat sheet polytetrafluroethylene (PTFE) membrane was used in the 4-stage ME-AGMD module. The maximum value of permeate flux could reach $38.62L/m^2h$ at feed -coolant water temperature difference about $52^{\circ}C$. The performance parameter of the module like, specific energy consumption and gain output ratio (GOR) was investigated for the module with and without heat recovery. Also, the module performance was characterized with respect to the separation efficiency of several important water quality parameters. The removal efficiency of the module was found to be >98.8% irrespective water quality parameters. During the experiment the membrane fouling was caused due to the deposition of the salt/crystal on the membrane surface. The membrane fouling was controlled by membrane module washing cycle 9 h and also by acidification of the feed water (pH=4) using 0.1M HCl solution.

• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.652-656
• /
• 2004

Both surface wash and backwash are considered as one of the most important methods that can improve the filtration efficiency in the existing water treatment plant. This study has mainly focused on the improvement of filtering efficiency by controlling surface wash and backwash time, and water level before backwash (when drained up to the trough, when drained up to 10 cm above filter bed, and when drained below 10 cm filter bed). Filtration efficiency was shown a little bit of differences depending on the operating conditions like surface wash injection pressure, the distance control between filter bed and the facility, and the types of surface wash. When the water level before backwash was reached up to 10 cm below filter bed after draining, however, the filtration velocity and the turbidity removal efficiency in the filter bed was improved. When the surface wash followed by backwash is longer, it showed a similar result. Because the proper adjustment of surface washing time makes filtration efficiency higher, therefore, it is necessary to set up the backwash time moderately.

• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.181-193
• /
• 2013

The purpose of this study is to investigate dyeing properties and functionality of cotton and silk fabrics dyed with hot-water extract from Juniperus chinensis heartwood. Water-soluble dye of Juniperus chinensis heartwood extracted with distilled water was expressed YR color series. Dye uptake of cotton continued to increase according to the increase of the dye concentration. Its variation trends were shown to be similar to the isothermal absorption curve of the Freundlich. Dye uptake of silk was better than cotton, increased depending on increasing concentration of the dye, dyeing time and temperature. Its variation trends were shown to be similar to the isothermal absorption curve of the Langmuir. As the pH increased, the dye uptake of fabrics reduced and showed increased on red tinge. Colors of the dyed fabrics were various, depending on dye concentration and the mordant type and mordant concentration. Washing fastness, light fastness and perspiration fastness were not good. However, rubbing and dry cleaning fastness showed relatively good grade. Dyed fabrics of ultraviolet-cut ability and deodorant ability were improved. And dyed fabrics showed antimicrobial abilities of 99.9% against Staphylococcus aureus.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.105-107
• /
• 2008

Dyeing properties of the colorants extracted from pomegranate hull on hair were investigated to study its efficay of natural hair coloring dye. Effect of dyeing condition and mordanting on dye uptake, color change and colorfastness were explored. In addition, tensile strength retention is measured and the surface of the hair was observed by SEM. The water extracted pomegranate hull was concentrated and freeze-dried for preparing colorant powders. It was considered that ionic bonding was involved in the adsorption of pomegranate colorants to hair. Pomegranate hull colorants produced greyish brown colors on hair and the hair mordanted with Fe showed dark brown color. Mordant except Fe did not significantly increased dye uptake. Mordant except Cu increased light fastness, mordant except Cr increased washing fastness. SEM to observe the hair is damaged by ultraviolet light and cleaning. This is consistent with the results of tensile strength retention. From the results of colorfastness th washing and light, it was concluded that colorants from pomegranate hull can be need as a semi-permanent natural hair coloring dye.

• Textile Coloration and Finishing
• /
• v.14 no.3
• /
• pp.44-52
• /
• 2002

Recently there has been a growing interest in the use of natural dyes in textile applications. Natural dyes can exhibit better biodegradability and generally have a higher compatibility with the environment. In this study, the colorants of Catalpa ovata bark were extracted with water and analyzed by spectrophotometry for their main colorant species. Cotton, silk and wool fabrics have been dyed with aqueous extract of Catalpa ovata bark and their dyeabilities on the fibers were studied. Additionally the fastness to washing, drycleaning and light, and the effects on bacteriostatic rate and UV-B protection rate were also investigated. The major colorant of the extract of Catalpa ovata bark was shown to be 6-O-trans-caffeoyl-$\beta$-D-glucopyranoside. Cotton, silk and wool fabrics dyed with the extract of Catnip ovata bark were colored in yellowish red tint. The optimum dyeing condition of the colorants extracted from Catalp ovata bark was three repeated dyeing at $95^\circ{C}$ for 1 hr using post mordanting. For dyed silk and wool fabric, the fastness to washing were improved by mordanting, and the fastness to drycleaning were very outstanding. In case of wool fabric dyed with the extract of Catalpa ovata bark, the bacteriostatic rate was increased drastically by 98.0%, and UV-B protection rate was increased by 97.3%.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.276-283
• /
• 2017

The aim of this study is to develop an effective dyeing process for black color on the silk fabrics, using natural Indigo, Madder, Amur cork tree, Alder, Logwood, and Gallnut. All natural dye materials were water-extracted, concentrated, and freeze-dried. Seven different processes were carried out and the color differences(${\Delta}E$) of black color with each process from the chemical black dyed fabric were compared. The light, washing, and rubbing fastness were evaluated. The black dyeing of the silk fabrics was well carried and excellent black color was obtained in every methods. The profound black color could be obtained by the subtractive mixture of the three primary colors of red, yellow, and blue in the order of indigo(blue) - amur cork tree(yellow) - madder or lac(red). Black color was efficiently obtained by iron mordant when logwood or alder fruit was used. The color difference(${\Delta}E$) from the black color with chemical dyestuff was the lowest in the indigo - amur cork tree - lac - iron method. Light fastness and washing fastness were excellent in all dyeing processes, showing grade 5. The fastness to rubbing was excellent as shown grade 5 in the dry samples of logwood - iron process and alder fruit - iron process.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.18-24
• /
• 2013

The influences of various operating parameters on physico-chemical techniques were evaluated to remediate petroleum-contaminated sandy soil including S/L ratio, kinetic, and effect of soil particle size. The simple extraction using tap water removed only 20.6% of total petroleum hydrocarbon (TPH), and addition of NaOH enhanced the removal of TPH to approximately 30%. To meet the regulation levels, a surfactant, sodium dodecyl sulfate, was added, and the removal of TPH increased to 4 times. Probably, the carbonate minerals affected chemical aging and soprtion of petroleum, which inhibited the extraction of TPH. The soil with smaller particle size contained more TPH, and the removal of TPH was obstructed with smaller particle size. However, NaOH addition increased the removal of TPH in the smaller particles. The physico-chemical properties of soil influenced greatly the removal of petroleum even in sandy soil.

• Textile Coloration and Finishing
• /
• v.20 no.3
• /
• pp.8-17
• /
• 2008

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of turmeric was studied. In this study, the colorants of turmeric were extracted with boiling water. Chitosan-crosslinked cotton fabrics was dyed with aqueous extract of turmeric and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(turmeric) by the chemical linking of chitosan to the cellulose structure. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. The dyeability(K/S), which was obtained by CCM observation, remarkably became increased when the crosslinked chitosan concentration was higher. Dyeability of turmeric was improved on chitosan-crosslinked cotton fabric rather than only cotton fabric, while the saturated dyeing time was 20minutes at $60^{\circ}C$. The hue value indicated greenish yellow with increasing the crosslinked chitosan concentration. And the color fastness to washing and light was almost the same.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.4
• /
• pp.403-408
• /
• 2009

Dandelion (Taraxacum platycarpum) has been widely utilized for medicinal purposes. However, the dandelion seeds are relatively difficult to germinate under cultivation conditions, which hampers seedling propagation of dandelion plants and reduces the opportunity of usage of such a useful medicinal plant. Thus, in this study, in vitro conditions for the dandelion seed germination were optimized to enhance the germination rate. In seed washing steps, the sequential treatments with 20% of ethanol, 20% of NaOCl, and distilled water avoided microbial contamination with the highest in vitro germination rate (67.5%) from seeds sown in germination media. The media supplemented with 1.4 g/L of MS salts and 1% of sucrose significantly enhanced the germination rate compared to the media with 4.4 g/L of MS and 3% of sucrose. Sowing the seeds vertically in the optimized media supplement conditions, 1.4 g/L of MS salts and 1% of sucrose, gave the maximum in vitro germination rate (61%), which was almost three times higher than sowing seeds on a soil pot (23%). Our results indicate that the seed washing and sowing methods including germination medium supplements can be optimized to enhance in vitro seed germination of dandelion.

• Journal of Food Hygiene and Safety
• /
• v.13 no.3
• /
• pp.238-242
• /
• 1998

Chicken carcass microflora were evaluated for aerobic microorganisms after defeathering, evisceration, washing, chilling, and sanitizing during a commercial chicken processing and storage at wholesale and retailsale levels. Sampling was at between December 1997, and March, 1998. Tap water washing and sanitizing with 25 ppm chlorine for 10 sec significantly (P<0.05) reduced aerobic plate counts (APC) and gram-negative bacterial counts (GNC) on chicken carcasses from a commercial chicken-processing plant. After 4 days at $2{\pm}2^{\circ}C$, APC and GNC on chicken carcasses in retailsale store rapidly increased compared to those in wholesale store (P<0.05). Chicken wings from retailsale store significantly (P<0.05) decreased generation time (GT) compared to other chicken carcasses.