• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1830-1841
• /
• 2012

We investigated the changes in microbial and physicochemical characteristics of the raw materials of Saengsk (brown rice, barley, carrot, potato, Angelica utilis Makino and kale) during storage after treatment with slightly acidic electrolyzed water (SAEW). To confirm the antimicrobial effects of the treatment washing solutions as well as the physicochemical changes in chromaticity, we stored the raw materials of Saengsik for 5, 10, 15, 20, 25 and 30 days at storage temperatures of 4, 10, 15, 20, 25 and $30^{\circ}C$ in a shelf-life study. The effects of microbial inhibition were higher in carrot treated with SAEW than in that treated with NaOCl, as indicated by a 1.75 log CFU/g reduction. Moreover, a 1.54 log CFU/g reduction of total coliforms was achieved in brown rice in response to SAEW treatment, which was higher than NaOCl treatment at all storage temperatures and periods. The lightness, redness and yellowness values of the raw materials of Saengsik were not significantly affected by SAEW treatments, except for Angelica utilis Makino and kale, whereas SAEW treatment resulted in decreased chromaticity values when compared to the NaOCl treatment. Overall, there was a significant difference (p<0.05) between the efficacy of the SAEW and NaOCl treatments. These results indicate that washing with SAEW is an effective method to reduce the microorganisms and enhance the shelf-life of raw materials of Saengsik; therefore, it can be effectively used to sanitize ingredients of Saengik without affecting the other properties during storage.

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.934-944
• /
• 1994

Effects of residual chloride on thermal decomposition behaviour of a-stannic acid and physical properties of $SnO_{2}$ powder were observed. The powder was fabricated by hydroxide method; $\alpha$-stannic acid was precipitated by mixing acqueous solutions of $SnCl_{4}$ and $NH_{4}$OH . The precipitate was washed with $NH_{4}NO_{3}$ solution while washing was controlled to be of three grades to modify its residual chloride content. The precipitate was dried at $1100^{\circ}C$ ~ 24h and calcined in air at $500^{\circ}C$ ~ $1100^{\circ}C$ for one hour. Thermal decomposition behaviour of $\alpha$-stannic acid was examined by a DT-TGA and a FTIR. Chemical composition and physical properties of $SnO_{2}$ powder were observed by an AES, a BET and a TEM, respectively. With a reduction in chloride content, the relative crystallite size of $SnO_{2}$ powder slightly increased by a low-temperature-calcining. However, at a high calcining temperature(T), the reverse relation occured. It was suggested that chloride ion replaces part of lattice oxygen site of a-stannic acid. Also, chloride ion on the site was suggested to retard de-hydration as well as crystalization at a low T while to promote crystal growth of $SnO_{2}$ by forming oxygen vacancy at a high T.

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.281-286
• /
• 2010

The objective of this study was to analyze the microbial populations in the raw ingredients of kimchi and their changes during an automated commercial manufacturing process. High population numbers of total aerobic bacteria, lactic acid bacteria, Leuconostoc sp., and yeast were detected in garlic, ginger, red pepper powder and this result revealed that these ingredients were the major source of microbials in kimchi. Additionally, during the salting process of Chinese cabbage, rapid microbial growth was observed and the consecutive washing process was determined to be ineffective, lowering the microbial count by only one log reduction. Yeast was also detected in various ingredients. These results strongly suggest that, in order to lower the microbial population numbers in kimchi, the side-ingredients and salting process should be subjected to the appropriate sanitization or sterilization processes at the HACCP level. Beside, treatment of salted Chinese cabbage with sodium hypochlorite solutions after the salting step is recommended. To inhibit yeast growth, appropriate chemical treatment and approval of additive uses to control microbials should be considered. These experimental results and suggestions will be used to improve the kimchi manufacturing process in factories.

• Korean Journal of Materials Research
• /
• v.24 no.12
• /
• pp.671-676
• /
• 2014

It is known that bones get damaged by accidents and aging. Since the discovery of Bioglass, various kinds of ceramics have been also found to bond to living bone; some of these ceramics are already being clinically used as bone-repairing materials. In the present study, antibacterial calcium silicate gel ($Ag-30CaO{\cdot}70SiO_2$ gel) was prepared by sol-gel method in order to control the microstructure, which is related to the dissolution rate and induction period of apatite formation in body environment. In addition, biological $Ag-30CaO{\cdot}70SiO_2$ is tested. This was done to impart antimicrobial activity to the $30CaO{\cdot}70SiO_2$. Ag ion was added during sol-gel synthesis to replace the $H_2O$ added during the making of the $30CaO{\cdot}70SiO_2$ gel, which has silver solutions of various concentration. After the sol-gel process, 1N-$HNO_3$ solution was used to wash the gel when synthesizing the gel, in order to maintain the porous structure and remove PEG, water soluble polymers. Then, the apatite forming ability of the sol-gel derived CaO-$SiO_2$ gels was investigated using simulated body fluid (SBF), which had almost the same ion concentration as that of human blood plasma. The gels were analyzed by FT-IR spectroscopy, SEM observation, XRD, and fluorescent microscopy. The apatite was successfully created even after washing the gel; apatite is present in an amorphous state, and was found to affect the concentration of the Ag ion in cells in MC3T3 live & dead assay results. From these results, it is suggested that a good material that can be used to repair defects of nature bone is $Ag-30CaO{\cdot}70SiO_2$ gel.

• Journal of Korean Biological Nursing Science
• /
• v.6 no.2
• /
• pp.43-55
• /
• 2004

Purpose : This study was conducted to identify the peritonitis occurence of CAPD, by which a basis for efficient patient management could be provided. Method: Data were collected by questionnaires and hospital record from 55 people who underwent or were going through CAPD from January 1998 to April 2004 in a university subsidiary hospital kidney department. Result: 1) There were many elderly people of 61 years or above taking up 50.9%, 75% had low levels of education with middle school graduation or less, and the cases where separate individual rooms enabling the exchange of CAPD were not possessed was shown to be 61.8%. 2) With the management feature of CAPD, those who bathed once or less per 7 days made up 60.0%, and 60% washed their hands well before exchanging solutions which meant that 40% did not wash well or just washed moderately, and in terms of CAPD education, the proportion of those receiving education both before and after dialysis was 29.1%. also, with nutrition conditions, cases where the level of serum albumin was lower than 3.0 made up 38.2%, and those who were conducting self CAPD management was 65.5%, and cases where the management was done by the spouse or family members was revealed to be 34.5%. 3) There were Peritonitis occurrences in 40% of cases, and the number of Peritonitis occurrences within the period was 36, with an occurrence rate of $0.65{\pm}0.99$. Also, 66.7% of the causing bacteria were no growth, Gram positive bacteria made up 27.8%, and Gram negative bacteria consisted of 5.5%. 4) No significant difference was found peritionitis occurrence according to general and management characteristics. Lower peritionitis occurrence were shown with those who had spouses or family members conducting CAPD management as opposed to self-managing patients(p=0.037). Conclusion: Elderly patients there needs to be the participation of family or other support resources rather than subjecting them to self-management of solution exchange and entry/exit. Also, The high occurrence rate from Gram positive bacteria is shown so the importance of CAPD management education including bathing and hand washing needs to be emphasized.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.1-14
• /
• 2017

For the removal of cesium (Cs) from high radioactive/high salt-laden liquid waste, this study synthesized a highly efficient composite adsorbent (potassium cobalt ferrocyanide (PCFC)-loaded chabazite (CHA)) and evaluated its applicability. The composite adsorbent used CHA, which could accommodate Cs as well as other molecules, as a supporting material and was synthesized by immobilizing the PCFC in the pores of CHA through stepwise impregnation/precipitation with $CoCl_2$ and $K_4Fe(CN)_6$ solutions. When CHA, with average particle size of more than $10{\mu}m$, is used in synthesizing the composite adsorbent, the PCFC particles were immobilized in a stable form. Also, the physical stability of the composite adsorbent was improved by optimizing the washing methodology to increase the purity of the composite adsorbent during the synthesis. The composite adsorbent obtained from the optimal synthesis showed a high adsorption rate of Cs in both fresh water (salt-free condition) and seawater (high-salt condition), and had a relatively high value of distribution coefficient (larger than $10^4mL{\cdot}g^{-1}$) regardless of the salt concentration. Therefore, the composite adsorbent synthesized in this study is an optimized material considering both the high selectivity of PCFC on Cs and the physical stability of CHA. It is proved that this composite adsorbent can remove rapidly Cs contained in high radioactive/high salt-laden liquid waste with high efficiency.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.714-721
• /
• 2010

This research was undertaken to evaluate the feasibility of lanthanum hydroxide for fluoride removal from aqueous solutions. A batch sorption experiments were conducted to study the influence of various factors such as pH, contact time, initial fluoride concentration and temperature on the sorption of fluoride on lanthanum hydroxide. The optimum fluoride removal was observed in the $pH_{eq}{\leq}8.8$. Sorption equilibrium of fluoride on lanthanum hydroxide was better described by the Freundlish isotherm model than by the Langmuir isotherm model. The adsorption energy obtained from D-R model was 9.21 kJ/mol indicating an ion-exchange process as primary adsorption mechanism. The pseudo-second-order kinetic model described well the experimental kinetic data. Thermodynamic parameters such as ${\Delta}Go^{\circ}$, ${\Delta}H^{\circ}$ and ${\Delta}S^{\circ}$ indicated that the nature of fluoride sorption is spontaneous and endothermic. The used lanthanum hydroxide could be regenerated by washing with NaOH solution. Also, the results applied to real ground water indicate that fluoride selectivity and removal capacity of lanthanum hydroxide were superior to those of PA anion-exchange resin.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.584-594
• /
• 2014

To increase of surface hydrophilicity of polymeric thin films is an important approaching technique for introduction of self-cleaning and/or antifogging properties on the surfaces of those films. In general, hydrophilic surface can be produced by coating non ionic surfactants or by increasing surface energy. Various non-ionic surfactants, such as Tween, Span, and PEG-PPG block copolymers were selected for our experiments, because they are cheap and well soluble in toluene system as well as they contain several reactive hydroxy fuctional groups with coupling agents. Blending conditions influence the PET film surface hydrophilicities. However, the introduction of only these surfactants on the surface of PET films did not show the high durability of hydrophilic properties after washing with water. To improve the durability two types of coupling agents such as epoxide and diisocyanate were adopted. Contact angle of water on hydrophilically coated PET film surface with 6 wt% of isophrone diisocyanate(IPDI) containing coating solution was reached to $8.7^{\circ}$, which was an indirect evidence for very high surface hydrophilicity. A light(500 nm of wavelength) transmittance value of coated PET film was changed only from 87% to 85% with keeping a good transparent property. This film can be usable for self-cleaning film industries.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.11-31
• /
• 1999

Removal of hexavalent chromium from artificial groundwater (AGW) by granular activated carbon (GAC) was investigated in batch and continuous-flow column studies. Experimental parameters that were examined included solution pH, presence of dissolved oxygen (DO), and GAC pretreatment with Fe(II). As the solution pH increased from 4 to 7.5, the amount of Cr(VI) removed by both GACs decreased significantly. Exclusion of DO from the experimental systems resulted in greater removal of Cr(VI) from solution, possibly as a result of reduction to Cr(III). However, pretreatment of the GAC with a reductant (Fe(II)) did not improve Cr(VI) removal. Equilibration With 0.01 M $K_2$$HPO_4$[to extract adsorbed Cr(VI)] followed by a wash with 0.02 N $K_2$$HPO_4$[to remove precipitated/sorbed Cr(III)] proved to be a viable approach for the regeneration of carbons whose Cr(VI) removal capacities had been exhausted. The performance of the regenerated carbons exceeded that of the virgin carbons, primarily because of the favorable adsorption of Cr(VI) at lower pH values and the reduction of Cr(VI) to Cr(III), The presence of Cr(III) in acid wash solutions provides direct evidence that Cr(VI) is reduced to Cr(III) in GAC systems under relatively acidic conditions. GAC performance over five complete cycles was consistently high, which suggests that such a system will be able to function over many operation cycles without deleterious effects.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.10-16
• /
• 2007

In this study, we examined the preparation and hydrolysis property of immobilized urease membrane to decompose harmful urea in the body and remove ammonia which was produced by its decomposition. Urease immobilized membrane was prepared by introducing anion-exchange group DEA into porous hollow-fiber membrane by radiation graft polymerization method, and immobilization of urease. When urease was immobilized at membrane introduced with anion-exchange group, the more increasing grafting rate, the more increasing immobilization amount. The result originates from the fact that a greater amount of protein was immobilized by forming a multilayer on the longer grafted chain. Meanwhile, the addition of the cross-linker was possible not only to suppress separation phenomenon produced during a washing process of immobilized urease membrane but also to enable the recycling of membrane. Urease Immobilized membrane with no separation phenomenon was prepared by cross-linking reaction for 5 h, and the hydrolysis rate of prepared urease immobilized membrane was over 98% and 50%, respectively, in 1 mol and 4 mol urea solutions.