• 대한수의학회지
• /
• 제28권2호
• /
• pp.221-226
• /
• 1988

Normal swine brains at 1 to 70 days after birth were used to investigate the presence and morphology of the subependymal layer (SL) in the ventricle walls. The brain samples were taken from 27 pigs of 4 swine breeds. The results were summarized as follows: 1. SLs were observed on the walls of the lateral ventricle (LV) but none were observed on the walls of the 3th and 4th ventricles. 2. SLs of the LV walls were composed of mainly 3-to 10-cell layers in thickness. The thinest region of SLs was composed of only 1-to 2-cell thick on the dorsal and ventral walls, and the thickest region was composed of 250-to 300-cell thick on extension region of the SLs into the angle between the corpus callosum and caudate nucleus. 3. Of the LV parts observed, the SL thickness were 25-to 45-cell thick on the anterior horn, 3-to 10-cell thick on the body, 100-to 220-cell thick on the angle region between the corpus callosum and caudate nucleus, and 3-to 5-cell thick the superior walls of the posterior horn. Also the SL thickness was more thick on the anterior region than those on the posterior region. 4. SLs may be classified as three types by the cell distribution; one type of them is closely arranged cell region with the distinctive lateral margin from the periventricular white matter, the other type is loosely arranged cell region with the undistinctive lateral margin, and another type is two-subdivided region as the loosely and closely arranged cell layers in a layer. 5. SLs were extensively thick in young age but gradually decreased in size and cell number with age after 20-day age. SL layers were composed of mainly oligodendrocytes, astrocytes and immature cells of them. Morphological differences of SL in different breeds of pigs were not observed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.379-381
• /
• 2011

Direct numerical simulations (DNSs) of spatially developing turbulent boundary layers (TBLs) over two-dimensional (2-D) and rod and three-dimensional (3-D) cube rough walls were performed to investigate the effects of streamwise spacing on the properties of the TBL The 2-D and 3-D roughness were periodically arranged in the downstream direction with pitches of px/k=2, 3, 4, 6, 8 and 10 and for the cube, the spanwise spacing is fixed to pz/k=2 with staggered array, where px and pz are the streamwise and spanwise spacings of the roughness and k is the roughness height. Inspection of the Reynolds stresses showed that except for px/k=2 and 3 over the 2-D rough walls, the effects of the surface roughness extend to the outer layer over the 2-D and 3-D rough walls and the magnitude of the Reynolds shear stress in the outer layer is increased with proportion to px/k. However, such results are contrary to the trends of form drag, roughness junction and roughness length against px/k, which showed the maximum values at px/k=8 and 4 over the 2-D and 3-D rough walls respectively.

• Structural Engineering and Mechanics
• /
• 제34권3호
• /
• pp.335-350
• /
• 2010

Out of plane behaviors of walls and infills are investigated in this paper, using rigid block concepts. Walls and infills are sometimes separated from top beams because of in plane movement of the walls and crumbling mortar layers under the top beams. Therefore, sufficient strength should be supplied to hold them against out of plane forces. Such walls are studied here under some real and scaled earthquakes, regarding their out of plane behavior. Influences of some reinforcements, connecting the walls to frames or perpendicular walls, are also studied. It is shown that unreinforced walls of regular sizes (3 m high and 4.5 m long) are normally unstable in the earthquakes. However, performing some reinforced bars that connect them to adjacent elements- frames or perpendicular walls - stabilizes them. Eventually, it is concluded that supplying 3 reinforced bars at 1/4, 2/4 and 3/4 of the panel's height stabilizes the walls in the assumed earthquakes. In this regard, for 20 cm and 35 cm thick walls ${\Phi}$18mm and ${\Phi}$20mm bars are to be used, respectively. For walls with other configurations, the forces and required areas of the reinforcements can be determined by the developed method of this paper.

• 보존과학회지
• /
• 제30권1호
• /
• pp.55-65
• /
• 2014

이 연구는 위봉사보광명전 백의관음벽화의 보존처리에 앞서 진행되어진 과학적 조사에 관한 결과물로써, 벽체의 입도분포 및 미세구조와 화학성분 그리고 광물 결정상을 분석하였으며, 안료 및 접착매질을 분석하였다. 또한 비파괴진단 방법인 초음파 탐사를 통해 벽화내부에 대한 안정성을 파악하였다. 분석 결과 벽체에 사용된 광물입자들은 중립질 이상의 모래와 세립질 이하 풍화토의 혼합물인 것으로 판단되며, 채색에 사용된 안료는 바탕층은 황토, 백색안료는 호분, 적색계열의 안료는 석간주를 사용하였고 녹색계열은 석록이 사용되었던 것으로 추정된다. 향후 벽화 보존처리에 있어 이와 같은 과학적 분석을 통한 보존처리를 실시한다면, 처리 시 안정성을 높이고 벽화의 보존관리를 위한 기초자료로 활용될 수 있을 것이다.

• 보존과학회지
• /
• 제26권4호
• /
• pp.445-458
• /
• 2010

1993년에 해체 및 보존 처리된 금산사미륵전 벽화는 현재 박락과 균열, 박리와 같은 심각한 손상이 진행된 것으로 조사되었다. 금번 분석조사는 향후 진행될 금산사 미륵전 벽화 보존처리를 위하여 과거에 처리된 벽체의 재료적 특성을 파악하기위해 진행되었다. 손상이 가장 심한 남측 벽의 벽체를 대상으로 하였으며 시료는 남측 2층 외벽의 불벽과 포벽화의 마감벽, 중벽, 배면 보강부의에서 박락된 벽체시료를 채취하여 미세구조와 화학성분, 결정상, 그리고 입도분포를 중심으로 분석하였다. 분석결과, 불벽과 포벽의 마감벽은 유사한 풍화토를 사용하였고 중벽 또한 유사한 모래와 풍화토를 사용하였으며 비교적 균일한 크기와 모양의 광물 입자들의 집합체로 구성되어 있으나, 과거 보존처리 과정에서 벽체의 보강을 위해 사용한 아크릴 계열의 경화제의 영향으로 광물 입자들이 응집되어 매우 단단한 응결체 (aggregate)를 형성하고 있는 것으로 확인되었다. 벽체의 배면 1차 보강층과 배면 2차 보강층은 석고($CaSO_4{\cdot}2H_2O$)가 주 결정상인 것으로 분석되었으며, 모래와 점토광물이 소량 함유되어 있는 것으로 판단된다. 향후 보존처리는 부분적으로 경화된 벽체후면에 대한 조치와 1, 2차보강층의 제거가 우선적으로 진행되어야 한다.

• Structural Engineering and Mechanics
• /
• 제64권3호
• /
• pp.329-337
• /
• 2017

This study concerns the vibrational behavior of multi-walled nested silicon-carbide and carbon nanotubes using the finite element method. The beam elements are used to model the carbon-carbon and silicon-carbon bonds. Besides, spring elements are employed to simulate the van der Waals interactions between walls. The effects of nanotube arrangement, number of walls, geometrical parameters and boundary conditions on the frequencies of nested silicon-carbide and carbon nanotubes are investigated. It is shown that the double-walled nanotubes have larger frequencies than triple-walled nanotubes. Besides, replacing silicon carbide layers with carbon layers leads to increasing the frequencies of nested silicon-carbide and carbon nanotubes. Comparing the first ten mode shapes of nested nanotubes, it is observed that the mode shapes of armchair and zigzag nanotubes are almost the same.

• Structural Engineering and Mechanics
• /
• 제78권4호
• /
• pp.455-471
• /
• 2021

The present work focuses on experimental and numerical performance of the ferrocement RC walls reinforced with welded steel mesh, expanded steel mesh, fiber glass mesh and tensar mesh individually. The experimental program comprised twelve RC walls having the dimensions of 450 mm×100 mm×1000 mm under concentric compression loadings. The studied variables are the type of reinforcing materials, the number of mesh layers and volume fraction of reinforcement. The main aim is to assess the influence of engaging the new inventive materials in reinforcing the composite RC walls. Non-linear finite element analysis; (NLFEA) was carried out to simulate the behavior of the composite walls employing ANSYS-10.0 Software. Parametric study is also demonstrated to check out the variables that can mainly influence the mechanical behavior of the model such as the change of wall dimensions. The obtained numerical results indicated the acceptable accuracy of FE simulations in the estimation of experimental values. In addition, the strength gained of specimens reinforced with welded steel mesh was higher by amount 40% compared with those reinforced with expanded steel mesh. Ferrocement specimens tested under axial compression loadings exhibit superior ultimate loads and energy absorbing capacity compared to the conventional reinforced concrete one.

• Earthquakes and Structures
• /
• 제22권4호
• /
• pp.355-372
• /
• 2022

The study is part of an experimental program on full-scale Un-Reinforced Masonry (URM) wall panels strengthened with Textile reinforced mortars (TRM). Eight brick walls (two with and five without central opening), were tested under the diagonal tension (shear) test method in order to investigate the strengthening system effectiveness on the in-plane behaviour of the walls. All the URM panels consist of the innovative components, named "Orthoblock K300 bricks" with vertical holes and a thin layer mortar. Both of them have great capacity and easy application and can be constructed much more rapidly than the traditional bricks and mortars, increasing productivity, as well as the compressive strength of the masonry walls. Several parameters pertaining to the in-plane shear behaviour of the retrofitted panels were investigated, including shear capacity, failure modes, the number of layers of the external TRM jacket, and the existence of the central opening of the wall. For both the control and retrofitted panels, the experimental shear capacity and failure mode were compared with the predictions of existing prediction models (ACI 2013, TA 2000, Triantafillou 1998, Triantafillou 2016, CNR 2018, CNR 2013, Eurocode 6, Eurocode 8, Thomoglou et al. 2020). The experimental work allowed an evaluation of the shear performance in the case of the bidirectional textile (TRM) system applied on the URM walls. The results have shown that some analytical models present a better accuracy in predicting the shear resistance of all the strengthened masonry walls with TRM systems which can be used in design guidelines for reliable predictions.

• Earthquakes and Structures
• /
• 제23권3호
• /
• pp.297-313
• /
• 2022

Composite steel plate shear wall (CSPSW) is a relatively novel structural system proposed to improve the performance of steel plate shear walls by adding one or two layers of concrete walls to the infill plate. In addition, the buckling of the infill steel plate has a significant negative effect on the shear strength and energy dissipation capacity of the overall systems. Accordingly, in this study, using the finite element (FE) method, the performance and behavior of composite steel shear walls using T-shaped stiffeners to prevent buckling of the infill steel plate and increase the capacity of CSPSW systems have been investigated. In this paper, after modeling composite steel plate shear walls with and without steel plates with finite element methods and calibration the models with experimental results, effects of parameters such as several stiffeners, vertical, horizontal, diagonal, and a combination of T-shaped stiffeners located in the composite wall have been investigated on the ultimate capacity, web-plate buckling, von-Mises stress, and failure modes. The results showed that the arrangement of stiffeners has no significant effect on the capacity and performance of the CSPSW so that the use of vertical or horizontal stiffeners did not have a significant effect on the capacity and performance of the CSPSW. On the other hand, the use of diagonal hardeners has potentially affected the performance of CSPSWs, increasing the capacity of steel shear walls by up to 25%.

• Geomechanics and Engineering
• /
• 제36권3호
• /
• pp.277-293
• /
• 2024

Shored Mechanically Stabilized Earth (SMSE) walls are types of soil retaining structures that increase soil stability under static and dynamic loads. The damage caused by an earthquake can be determined by evaluating the probabilistic seismic response of SMSE walls. This study aimed to assess the seismic performance of SMSE walls and provide fragility curves for evaluating failure levels. The generated fragility curves can help to improve the seismic performance of these walls through assessing and controlling variables like backfill surface settlement, lateral deformation of facing, and permanent relocation of the wall. A parametric study was performed based on a non-linear elastoplastic constitutive model known as the hardening soil model with small-strain stiffness, HSsmall. The analyses were conducted using PLAXIS 2D, a Finite Element Method (FEM) program, under plane-strain conditions to study the effect of the number of geogrid layers and the axial stiffness of geogrids on the performance of SMSE walls. In this study, three areas of damage (minor, moderate, and severe) were observed and, in all cases, the wall has not completely entered the stage of destruction. For the base model (Model A), at the highest ground acceleration coefficient (1 g), in the moderate damage state, the fragility probability was 76%. These values were 62%, and 54%, respectively, by increasing the number of geogrids (Model B) and increasing the geogrid stiffness (Model C). Meanwhile, the fragility values were 99%, 98%, and 97%, respectively in the case of minor damage. Notably, the probability of complete destruction was zero percent in all models.