• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.354-359
• /
• 2013

일반적으로 건축물의 설계시 풍동 실험을 통한 풍환경의 평가를 수행하고 있으며, 이는 환경 영향 평가법에서 정한 건축 사업 시행 시 수반되어야 할 자연환경, 생활환경 그리고 사회경제환경의 영향 평가의 일환으로 실시되고 있다. 그러나, 풍동 실험의 경우 여러 가지 현실적 제약조건으로 설계와 실험의 피드백 (Feedback)이 원활하지 못하며, 특히 대상 건축물이 공장과 같이 대기 오염원이 되는 경우 실험은 더욱 어려운 형편이다. 이에 대한 보완책으로 전산 유체 역학을 이용한 건축물의 풍압 해석에 의한 풍하중 추정이나 인접 지형-지물의 영향을 고려한 건축물 주위의 풍환경 평가가 있다. 전산 모사에 의해 풍동 실험의 미비점을 보완하고, 보다 상세한 정보를 확보함으로써 건축물의 구조적 안전성의 증대와 환경 피해 감소를 기할 수 있다. 그러나 복잡한 지형-지물이나 건축물 주위의 풍환경에 대한 전산 모사는 주로 두 가지의 기술적 어려움을 수반하게 되다. 그 중 하나는 고정 경계면을 이루는 형상의 복잡성으로 인해 기존에 많이 이용하고 있는 Body-fitted 격자계를 이용하는 경우, 격자 생성 과정이 매우 복잡하고 어려울 뿐 만 아니라 생성된 격자가 주로 비정렬 (unstructured) 특성을 갖게 되어 수치해석 과정의 효율을 저하시키는 요인이 되며, 격자의 형상도 수치해석의 수렴성을 저하시키는 예가 많다. 다른 어려움으로 풍환경은 전형적인 난류 유동장으로서 난류의 전산 해석은 아직도 해결하지 못한 부분이 많다는 점이다. 이에 본 논문에서는 복잡한 지형-지물이나 건축물의 풍하중과 풍환경의 전산 모사 기술 확보를 위하여 수행중인 연구의 일환으로 물체 형상의 기하학적 복잡성의 극복을 위한 가상경계법 (Immersed Boundary Method)과 난류 유동장의 물리적 엄밀성을 높이기 위한 다와동 모사 (Large Eddy Simulation)을 이용한 물체 형상과 무관한 유동장 해석 기술 개발에 대하여 다루고자 한다. 먼저 최근에 유동 해석에 이용되는 방법인 가상경계법(IBM)은 물체를 포함한 전체 전산 영역을 직교 좌표계에 의해 이산화하고, 유동장내 존재하는 물체의 표면에서의 점착 조건을 만족시키기 위하여 지배 방정식에 적절한 외력을 추가로 고려하는 방법이다. 본 연구에서는 가상경계법을 이용하여 경계층에 위치한 건물 형상의 각진 물체 주위 사이에 형성되는 공동 내부의 비정상 유속 및 압력에 대한 전산 해석을 수행하고, 풍상측 전면에 형성되는 경계층에 의한 영향을 분석하였다.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.821-834
• /
• 2017

The increase in the rate of industrialization due to urbanization has caused the Urban Heat Island phenomenon where the temperature of the city is higher than the surrounding area, and its intensity is increasing with climate change. Among the cities where heat island phenomenon occurs, Seoul city has different degree of urbanization, green area ratio, energy consumption, and population density in each administrative district, and as a result, the strength of heat island is also different. So It is necessary to analyze the difference of Urban Heat Island Intensity by administrative district and the cause. In this study, the UHI intensity of the administrative gu and the administrative dong were extracted from the Seoul metropolitan area and the differences among the administrative districts were examined. and linear regression analysis were conducted with The variables included in the three categories(weather condition, anthropogenic heat generation, and land use characteristics) to investigate the cause of the difference in heat UHI intensity in each administrative district. As a result of analysis, UHI Intensity was found to be different according to the characteristics of administrative gu, administrative dong, and surrounding environment. The difference in administrative dong was larger than gu unit, and the UHI Intensity of gu and the UHI Intensity distribution of dongs belonging to the gu were also different. Linear regression analysis showed that there was a difference in heat island development intensity according to the average wind speed, development degree, Soil Adjusted Vegetation Index (SAVI), Normalized Difference Built-up Index (NDBI) value. Among them, the SAVI and NDBI showed a difference in value up to the dong unit and The creation of a wind route environment for the mitigation of the heat island phenomenon is necessary for the administrative dong unit level. Therefore, it is considered that projects for mitigating heat island phenomenon such as land cover improvement plan, wind route improvement plan, and green wall surface plan for development area need to consider administrative dongs belonging to the gu rather than just considering the difference of administrative gu units. The results of this study are expected to provide the directions for urban thermal environment design and policy development in the future by deriving the necessity of analysis unit and the factors to be considered for the administrative city unit to mitigate the urban heat island phenomenon.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.6
• /
• pp.49-65
• /
• 2021

Although the Environmental Impact Assessment (EIA) is continuously being advanced, the number of environmental disputes regarding it is still on the rise. In order to supplement this, it is necessary to analyze the accumulated complaint cases. In this study, through the analysis of complaint cases, it is possible to identify matters that need to be improved in the existing EIA stages as well as various damages and conflicts that were not previously considered or predicted. In the process, we dervied 'complaint-based data demands' that should be additionally examined to improve the EIA. To this end, a total of 348 news articles were collected by searching with combinations of 'environmental impact assessment' and a keyword for each of the six assessment groups. As a result of analysis of collected data, a total of 54 complaint-based data demands were suggested. Among those were 15 items including 'impact of changes in seawater flow on water quality' in the category of water environment; 13 items including 'area of green buffer zone' in atmospheric environment; 10 items including 'impact of soundproof wall on wind corridor' in living environment; 8 items including 'expected number of users' in socioeconomic environment, 4 items including 'feasibility assessment of development site in terms of environmental and ecological aspects' in natural ecological environment; and 4 items including 'prediction of sediment runoff and damaged areas according to the increase in intensity and frequency of torrential rain' in land environment. In future research, more systematic complaint collection and analysis as well as specific provision methods regarding stages, subjects, and forms of use should be sought to apply the derived data demands in the actual EIA process. It is expected that this study can serve to advance the prediction and assessment of EIA in the future and to minimize environmental impact as well as social conflict in advance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.671-679
• /
• 2008

The effect of Pre-cooled Turbojet Engine installation and nozzle exhaust jet on Hypersonic Turbojet EXperimental aircraft(HYTEX aircraft) were investigated by three-dimensional numerical analyses to obtain aerodynamic characteristics of the aircraft during its in-flight condition. First, simulations of wind tunnel experiment using small scale model of the aircraft with and without the rectangular duct reproducing engine was performed at M=5.1 condition in order to validate the calculation code. Here, good agreements with experimental data were obtained regarding centerline wall pressures on the aircraft and aerodynamic coefficients of forces and moments acting on the aircraft. Next, full scale integrated analysis of the aircraft and the engine were conducted for flight Mach numbers of M=5.0, 4.0, 3.5, 3.0, and 2.0. Increasing the angle of attack $\alpha$ of the aircraft in M=5.0 flight increased the mass flow rate of the air captured at the intake due to pre-compression effect of the nose shockwave, also increasing the thrust obtained at the engine plug nozzle. Sufficient thrust for acceleration were obtained at $\alpha=3$ and 5 degrees. Increase of flight Mach number at $\alpha=0$ degrees resulted in decrease of mass flow rate captured at the engine intake, and thus decrease in thrust at the nozzle. The thrust was sufficient for acceleration at M=3.5 and lower cases. Lift force on the aircraft was increased by the integration of engine on the aircraft for all varying angles of attack or flight Mach numbers. However, the slope of lift increase when increasing flight Mach number showed decrease as flight Mach number reach to M=5.0, due to the separation shockwave at the upper surface of the aircraft. Pitch moment of the aircraft was not affected by the installation of the engines for all angles of attack at M=5.0 condition. In low Mach number cases at $\alpha=0$ degrees, installation of the engines increased the pitch moment compared to no engine configuration. Installation of the engines increased the frictional drag on the aircraft, and its percentage to the total drag ranged between 30-50% for varying angle of attack in M=5.0 flight.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.187-195
• /
• 2015

The gas explosions in offshore installations are known to be very severe according to its geometry and environmental conditions such as leak locations and wind directions, and a dynamic response of structures due to blast loads depends on the load profile. Therefore, a parametric study has to be conducted to investigate the effects of the dynamic response of structural members subjected to various types of load shapes. To do so, a series of CFD analyses was performed using a full-scale FPSO topside model including detail parts of pipes and equipments, and the time history data of the blast loads at monitor points and panels were obtained by the analyses. In this paper, we focus on a structural dynamic response subjected to blast loads changing the magnitude of positive/negative phase pressure and time duration. From the results of linear/nonlinear transient analyses using single degree of freedom(SDOF) and multi-degree-of freedom(MDOF) systems, it was observed that dynamic responses of structures were significantly influenced by the magnitude of positive and negative phase pressures and negative time duration.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.168-178
• /
• 2012

The objective of this study is applied to office buildings to evaluate quantitative evaluation method about performance of double-skin at design stage to establish the basis for the purpose of evaluation performance. Select the evaluation building about design plan for applying the double-skin using the dynamic heat load analysis program the annual heating and cooling load of before and after the double-skin. Using CFD to analyze wind factor and applied ventilation for realistic results. Effects of double-skin to apply, and control techniques that can be done more realistically proposed through to set and control for shade control mode of ventilator and inside cavity wall of double-skin. Apply for the building the double-skin due to interpretation of the annual heating and cooling loads applied to interpret the quantitative effect confirmed the possibility. According to the form of a double skin was confirmed cavity environmental changes.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.301-310
• /
• 2013

Jet fans are installed in road tunnels in order to maintain critical velocity when fire occurs. Generally the number of jet fans against fire are calculated by considering critical velocity and flow resistance by wall friction, vehicle drag force, thermal buoyance force and natural wind. In domestic case, thermal buoyance force is not considered in estimating the number of jet fans. So, in this study, we investigated the pressure loss due to the thermal buoyance force induced by tunnel air temperature rise and the impact of thermal buoyance force on the number of jet fans by the numerical fire simulation for the tunnel length(500, 750, 1000, 1500, 2000, 3500m) and grade (-1.0, -1.5, -2.0%). Considering the thermal buoyance force, number of jet fans have to be increased. Especially in the case of 100MW of heat release rate, the pressure loss due to thermal buoyance force exceed the maximum pressure loss due to vehicle drag resistance, so it is analyzed that number of 2~11 jet fans are needed additionally than current design criteria. Thus, in case of estimating the number of jet fans, it must be considered of thermal buoyance force induced tunnel air temperature rise by fire.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.3
• /
• pp.113-121
• /
• 2019

The death rate of industrial accidents per 10,000 people in Korea is two to three times higher than that of major countries. Falling accidents at the construction site happened to have caused the most deaths. Analysis of existing research and measures by national institutions showed that the industrial accident management concentrated on falling accidents was insufficient and the seasonal safety management measures were not enough. There is thus the need for research that provides detailed and enough information on falling accidents. This study, therefore, aims to overcome the limitations of existing research and safety management accident response using a methodology that provides the necessary information for the prevention of fall accidents by deriving seasonal crash characteristics of the construction site. In order to provide enough information, 387 cases of seasonal construction site falling were collected, which describes the causal relationship of accidents. Text mining using principal component analysis and cluster analysis was carried out. The analysis showed that: In the spring, snowfall and unreasonable operation of equipment including lifts were the major cause. In summer, most accidents were caused by form, insufficient safety inspection, and installation work. In autumn, weather factors such as wind and typhoon were the cause. In winter, material transportation, exterior wall work, and ignore safety precautions were the cause of the crash.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.29-37
• /
• 2008

The objective of this research is to evaluate the optimum treatment methods for disposal sludge cake at different temperatures and periods of time. The disposal dehydrated sewage cake used in this study was obtained from N wastewater treatment plant in the P City. This system consists of continuous conveyer thermal dryer and pyrolysis. The continual conveyer thermal dryer was operated to evaluate the optimum conditions with temperature settings, ranges from 130 to $180^{\circ}C$, loading rates of 650~750 kg/hr and operating times of 110~120 minutes. The continual pyrolysis was also operated to evaluate the optimum conditions with temperature settings, ranges from 650 to $750^{\circ}C$, loading rates of 100~158 kg/hr and operating times of 20~40 minutes. The sewage sludge cake has a moisture content of 78~80% (wt) which decreased up to 1~3%(wt) resulted in breaking of cell wall after operating the continuous conveyer thermal dryer and pyrolysis. Important parameters which were operating times, moisture contents, loading rates, conveyer velocities and rotary velocities effects on the thermal kinetics and dynamics were investigated to evaluate the optimum conditions for the continual thermal dryer and pyrolysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.252-262
• /
• 2019

Following the earthquake in Gyeongju (2016) and Pohang (2017), South Korea is no longer a safe place for earthquakes. Accordingly, the need for shelters suitable for disaster environments is increasing. In this study, a lightweight composite panel was used to produce post-disaster housing for refugees to compensate for the disadvantages of existing evacuation facilities. For this purpose, an evaluation of structural performance and thermal environment for post-disaster housing for refugees composed of lightweight composite panels was performed. To assess the structural performance, a lateral loading test was conducted on a system made of lightweight composite panels. The specimens consisted of two types, which differed according to the bonding method, as a variable. In addition, the seismic and wind loads were calculated in accordance with KBC 2016 and compared with the experimental results. Regarding the energy performance, optimization of south-facing window planning and window-wall ratio and solar heat gain coefficient were analyzed to minimize heating, cooling, and lighting energy. As a result, the specimens composed of lightweight composite panels will perform sufficiently safely for lateral loads and the optimized window planning will lead to a low-energy operation.