• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.299-303
• /
• 2002

The relationship of crystallinity between defects distribution with (100) ZnTe/GaAs using HWE growth was investigated by four crystal rocking curve (FCRC) and transmission electron microscopy (TEM). The thickness dependence of crystal quality in ZnTe epilayer was evaluated. The FWHM value shows a strong dependence on ZnTe epilayer thickness. For the films thinner than 6 ${\mu}{\textrm}{m}$, the FWHM value decreases very steeply as the thickness increases. For the films thicker than 6 ${\mu}{\textrm}{m}$, it becomes an almost constant value. At the thickness of 12 $\mu\textrm{m}$ with the smallest value of 66 arcsec. which is the best value so far reported on ZnTe epilayers was obtained. Investigation into the nature and behavior of dislocations with film thickness in (100) ZnTe/(100)GaAs heterostructures grown by Hot Wall Epitaxy (HWE). This film defects range from interface to 0.7 ${\mu}{\textrm}{m}$ thickness was high density, due to the large lattice mismatch and thermal expansion coefficients. The thickness of 0.7~1.8 ${\mu}{\textrm}{m}$ was exists low defect density. In the thicker range than 1.8 ${\mu}{\textrm}{m}$ thickness was measured hardly defects.

• Journal of Veterinary Clinics
• /
• v.26 no.1
• /
• pp.76-80
• /
• 2009

A Maltese was presented with a subcutaneous mass at right flank, depression and hyperthermia. Ultrasonography revealed a hypoechoic mass with hyperechoic foci, a defect of abdominal wall and peritonitis. In cytology, fat necrosis was found. This dog was diagnosed as chronic suppurative steatitis secondary to pancreatitis and pancreatic herniation through surgery and histopathologic examination. Steatitis is recurrent inflammation and necrosis of adipose tissue. Also steatitis associated with pancreatic diseases such as pancreatitis and pancreatic tumor was reported and direct fat necrosis by pancreatic enzyme was supposed as the etiology. Steatitis secondary to pancreatitis was rarely reported in dogs and there was difficulty in diagnosis and treatment. This case has a limitation that pancreatitis was not diagnosed as underlying cause to steatitis before surgery. However, a defect of abdominal wall and peritonitis were observed on ultrasonography. Good prognosis could be achieved through prompt surgery and medical treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.120-123
• /
• 2003

The ZnSe epilayers were grown on the GaAs substrate by hot wall epitaxy. After the ZnSe epilayers treated in the vacuum-, Zn-, and Se-atmosphere, respectively, the defects of the epilayer were investigated by means of the low-temperature photoluminescence measurement. The dominant peaks at 2.7988 eV and 2.7937 eV obtained from the PL spectrum of the as-grown ZnSe epilayer were found to be consistent with the upper and the lower polariton peak of the exciton, $I_2$ ($D^{\circ}$, X), bounded to the neutral donor associated with the Se-vacancy. This donor-impurity binding energy was calculated to be 25.3 meV. The exciton peak, $I_1^d$, at 2.7812 eV was confirmed to be bound to the neutral acceptor corresponded with the Zn-vacancy. The $I_1^d$ peak was dominantly observed in the ZnSe/GaAs:Se epilayer treated in the Se-atmosphere. This Se-atmosphere treatment may convert the ZnSe/GaAs:Se epilayer into the p-type. The SA peak was found to be related to a complex donor like a $(V_{Se}-V_{Zn})-V_{Zn}$.

• Journal of Chest Surgery
• /
• v.13 no.2
• /
• pp.143-148
• /
• 1980

A 36 years old male patient underwent en bloc excision of the primary chondrosarcoma arising from 8th, 9th and 10th ribs of the chest wall. The tumor was 11.5 x 7.5 x 6.5 cm in size and was 320 gram in weight. After en bloc excision of the tumor, the defect of the chest wall was reconstructed with pedicle muscle flap and using compression dressing for 2 weeks, there happened no respiratory problem. And so we made a case report and review of literature.

• Journal of Chest Surgery
• /
• v.28 no.4
• /
• pp.412-415
• /
• 1995

Primary cardiac tumors are extremely rare and about 20-25% of primary cardiac tumors are malignant. Recently we have experienced a case of primary cardiac rhabdomyosarcoma originated on the right atrial wall. Patient was 41 years-old women and chief complaints were pitting edema and exertional dyspnea. Emergency operation was performed to relieve symptoms by pericardial effusion that hac been seen on the echocardiogram and large soft mass in right atrial cavity on the MRI. About 700ml amounts of bloody pericardial effusion was collected into the pericardial cavity. 4X5X5 cm sized ingrowing soft mass in the right atrial cavity and two small sized outgrowing masses were inspected. A tumor was invaded into the SA node and superior limbic portion of fossa ovalis. And then mass & right atrial free wall was resected but areas of SA node and fossa ovalis were not resected. Defect of right atrial wall was reconstruced with bovine patch. She was discharged after 2 weeks without any problems and she has been treated with chemotherapy.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.913-916
• /
• 1999

Recent developments of carbon nanotubes are reviewed［1,2,3,4］. We use Tersoff carbon potential for bonded interactions［5］ and Lennard-Jones 12-6 potential for non bonding interactions［6］to describe mechanical properties of the temperature-dependent armchair single wall carbon nanotube. At first we report that through defect number and bonding energy calculation, how single wall carbon nanutube is capped in the constant temperature. (300K, 2000K, 3000K, 4000K) At second, we perform MD simulation, which are performed on the energy optimized structure of carbon nanotube.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.730-735
• /
• 2009

The purpose of this study is to consider improvement performance to prevent condensation and draw the optimum insulation design method for building using simulation tool. In this study, the three corners, weak part in condensation, were conducted by three-dimensional steady state simulation. From the results, it is required to strengthen insulation design, and it is founded that existing insulation system typically applied to most Korean apartment buildings has serious insulation defect that insulation is disconnected by structural components at the joints of wall-slab and wall-wall in envelope. So, it is considerate to need a concrete technology improvement.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.5
• /
• pp.191-195
• /
• 2007

We investigated photoluminescence characteristics of ZnO nano needle-like rods grown on a c-plane $AL_2O_3$ substrate by the hot wall epitaxy method. The nano-rods were vertically well aligned along the ZnO c-axis. The diameters of the ZnO nano-rods ranged from 20 nm to 30 nm and their lengths were between 600 and 700 nm. In the photoluminescence spectrum at 10 K, the exciton emission bound to the neutral donor dominated while defect related emission was weakly observed. With a further increase of temperature, the free exciton emission appeared and eventually became dominant at room temperature.

• Journal of the Korean Society of Combustion
• /
• v.10 no.2
• /
• pp.1-8
• /
• 2005

Incomplete combustion due to quenching in a narrow confinement has been a major problem for realization of a reliable micro combustion device. In most micro combustors, effects of flows are absent in the quenching because the flow is laminar and no severe stretch is present. In such circumstance, quenching is caused either by heat loss or by removal of active radicals to the wall surface of the confinement. An experimental investigation was carried out to investigate the relative significance of these two causes of quenching of a premixed flame. A premixed jet burner with a rectangular cross section at the exit was built. At the burner exit, the flame stands between two walls with adjustable distance. The gap between the two walls at which quenching occurs was measured at different wall surface conditions. The results were analyzed to estimate the relative significance of heat loss to the wall and the removal of radicals at the surface. The measurements indicated that the quenching distance was independent of the wall surface characteristics such as oxygen vacancy, grain boundary, or impurities at low temperature. At high temperature, however, the surface characteristics strongly affect the quenching distance, implying that radical removal at the wall plays a significant role in the quenching process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.533-542
• /
• 2006

In order to assess the integrity of pipes with local thinning area, the plastic strain as well as the elastic strain at the root of thinned region are required particularly when fluctuating load is applied to the pipe. For estimating elastic-plastic strain at local wall thinning area in a straight pipe under tensile load, an estimation model with idealized fully circumferential constant depth wall thinning area is proposed. Based on the compatibility and equilibrium equations a nonlinear estimation equation, from which local elastic-plastic strain can be determined as a function of pipe/defect geometry, material and the applied strain was derived. Estimation results are compared with those from detailed elastic-plastic finite element analysis, which shows good agreements. Noting that practical wall thinning in nuclear piping has not only a circular shape but also a finite circumferential length, the proposed solution for the ideal geometry is extended based on two-dimensional and three-dimensional numerical analysis of pipes with circular wall thinning.