• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.9-13
• /
• 2009

Recently, construction in downtown is often done closely at the adjacent building. In this case, underground construction need to Basement Composite Wall(BCW) construction. However, generally, during the construction process of BCW form works have many problems that are narrow working space and inefficient time consuming. Despite of these problems, there was no quantitative research for the work time of BCM assembly. Therefore, in this study, work time of CBW form assembly in underground construction is identified by the work analysis. The results of this study reveal that buttress work of basement form take lots of time in the entire work process of Basement Composite Wall form assembly.

• Structural Engineering and Mechanics
• /
• 제29권4호
• /
• pp.433-453
• /
• 2008

The equation of motion of a one way (vertical) spanning strip wall, as an assembly of two rigid bodies, is presented. Only one degree of freedom is needed to completely describe the wall response as the bodies are assumed to be perfectly rectangular and are allowed to rock but not to slide horizontally. Furthermore, no arching action occurs since vertical motion of the upper body is not restrained. Consequently, the equation of motion is nonlinear, with non constant coefficients and a Coriolis acceleration term. Phenomena associated with overburden to self weight ratio, motion triggering, impulsive energy dissipation, amplitude dependency of damping and period of vibration, and scale effect are discussed, contributing to a more complete understanding of experimental observations and to an estimation of system parameters based on the wall characteristics, such as intermediate hinge height and energy damping, necessary to perform nonlinear time history analyses. A comparison to a simple standing, or parapet, wall is developed in order to better highlight the characteristics of this assembly.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3207-3216
• /
• 2021

Three-dimensional structures of a vortical flow field and heat transfer characteristics in a partially blocked 7-pin fuel assembly mock-up of sodium-cooled fast reactor have been investigated through a numerical analysis using a commercial computational fluid dynamics code, ANSYS CFX. The simulation with the SST turbulence model agrees well with the experimental data of outlet and cladding wall temperatures. From the analysis on the limiting streamline at the wall, multi-scale vortexes developed in axial direction were found around the blockage. The vortex core has a high cladding wall temperature, and the attachment line has a low cladding wall temperature. The small-scale vortex structures significantly enhance the convective heat transfer because it increases the turbulent mixing and the turbulence kinetic energy. The large-scale vortex structures supply thermal energy near the heated cladding wall surface. It is expected that control of the vortex structures in the fuel assembly plays a significant role in the convective heat transfer enhancement. Furthermore, the blockage plate and grid spacer increase the pressure drop to about 36% compared to the bare case.

• Advances in concrete construction
• /
• 제13권 2호
• /
• pp.153-162
• /
• 2022

Prefabricated exterior wall panel is the main non-load-bearing component of assembly building, which affects the comprehensive performance of thermal insulation and durability of the building. It is of great significance to develop new prefabricated exterior wall panel with durable and lightweight characteristics for the development of energy-saving and assembly building. In the prefabricated sandwich insulation hanging wall panel, the selection of material for the outer layer and the arrangement of the connector of the inner and outer wall layers affect the mechanical performance and durability of the wall panels. In this paper, high performance cement-based composites (HPFRC) are used in the outer layer of the new type wall panel. FRP bars are used as the interface connector. Through experiments and analysis, the influence of the arrangement of connectors on the mechanical behaviors of thin-walled composite wall panel and the panel with window openings under two working conditions are investigated. The failure modes and the role of connectors of thin-walled composite wallboard are analyzed. The influence of the thickness of the wall layer and their combination on the strain growth of the control section, the initial crack resistance, the ultimate bearing capacity and the deformation of the wall panels are analyzed. The research work provides a technical reference for the engineering design of the light-weight thin-walled and durable composite sandwich wall panel.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.726-739
• /
• 2003

A multi-dimensioanl model is being increasingly used to predict the thermo-flow field in the gas turbine combustor. This article addresses an integrated survey of modeling of the liquid spray formation and fuel distribution in gas turbine with high-shear nozzle/swirler assembly. The processes of concern include breakup of a liquid jet injected through a hole type orifice into air stream, spray-wall interaction and spray-film interaction, breakup of liquid sheet into ligaments and droplet,5, and secondary droplet breakup. Atomization of liquid through hole nozzle is described using a liquid blobs model and hybrid model of Kelvin-Helmholtz wave and Rayleigh-Taylor wave. The high-speed viscous liquid sheet atomization on the pre-filmer is modeled by a linear stability analysis. Spray-wall interaction model and liquid film model over the wall surface are also considered.

• 한국압력기기공학회 논문집
• /
• 제17권1호
• /
• pp.56-63
• /
• 2021

The feedwater ring is an assembly in steam generator internal piping, which distributes feedwater into the secondary side of the steam generator. It consists of an assembly of carbon steel piping, pipe fittings and J-nozzles which are inserted into the top of the feedwater ring and welded to the diameter of the ring. The feedwater ring at the attachment region of the J-nozzle may be susceptible to flow accelerated corrosion (FAC) due to flow turbulence which increases local fluid velocities. If a J-nozzle becomes a loose part, it can cause damage to tubing near the tube sheet. In this paper, the structural stress analysis for a wall thinned feedwater ring and integrity evaluations under assumed loading conditions are carried out in compliance with ASME B&PV SecIII, NB-3200.

• 시큐리티연구
• /
• 제50호
• /
• pp.307-337
• /
• 2017

집회의 자유는 헌법에서 보장하고 있는 기본권적 자유이다. 우리의 현실을 보면 집회의 자유는 경찰의 관리통제 하에 있을 때에만 보장되고, 그렇지 않을 때는 진압해야 할 대상으로 인식되고 있다. 심지어 경찰은 '깨진 유리창 이론(broken window theory)'을 거론하면서 조그만 불법이 심각한 불법․폭력시위로 변질될 수 있다는 이유로 집회의 평화성 보다는 '준법'여부에 집착하고 있는 듯한 태도를 보여주고 있다. 이러한 태도는 집회에 참여하는 시민을 진압해야 할 대상으로 내몰게 되는 결과를 초래하고 있다. 이 글은 최근 문제되고 있는 경찰물리력 사용수단으로서 차벽과 물포를 중심으로 물리력 사용요건과 현황을 분석하고, 그 개선방안을 제시하였다. 우선, 차벽의 설치는 집회장소를 항의의 대상으로부터 분리시킴으로써 집회가 갖는 본질적인 소통의 기능을 차단하고 있다. 따라서 차벽설치는 불법행위에 직면하여 예방을 위한 경고에도 불구하고 차벽설치 이외 다른 방법으로는 '사람의 생명 신체에 위해를 끼치거나 재산에 중대한 손해를 끼칠 우려가 있는 긴급한 경우'에 한하여 허용되어야 할 것이다. 이러한 긴급성이 없다면 차벽은 사전예방적 차원뿐만 아니라 사후예방적 차원에서도 허용되어서는 안된다. 물포는 사람의 생명․신체에 위해를 가할 우려가 있는 경찰장비로서 기본권의 중대한 제한을 가져오는 강제조치이다. 따라서 사람의 신체에 중대한 위험을 초래할 수 있는 조준 직사살수는 원칙적으로 금지되어야 한다. 다만 그 위험성을 고려하여 타인의 법익이나 공공의 안녕질서에 직접적인 위험이 '명백하게 초래'된 경우에 한하여 다른 대안이 없는 경우에 보충적으로 사용하여야 한다. 아울러 그 사용기준 등에 대해서는 물포가 위해성 경찰장비인 점을 고려하여 법률로 명시해야 한다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권1호
• /
• pp.56-65
• /
• 2010

본 연구는 외기에 노출된 경골목조벽체의 수분축적을 감소시킬 수 있는 벽체 구성을 찾기 위해 수행되었다. 이를 위해 다음 다섯 가지 형태의 벽체 구성을 대상으로 벽체 내 수분이동과 수분축적을 평가하였다; 일반적인 벽체구성(기본벽체 T), 실내 측 방습지 추가(P1), 실내 측과 단열재 구간의 방습지 추가(P2), 환기를 위한 사이딩 뒷면의 공기층 추가(P3), P3벽체에서 실외 측 방습지의 실내 측으로 이동(P4). 옥외 실험가옥에 기본벽체와 제안벽체를 설치하여 외기에 노출된 벽체의 수분이동과 수분축적을 평가하였다. 실험결과 계절에 따라 추가 방습지와 공기층의 개선 정도가 다르게 나타났으나 연간 벽체 내 수분축적 감소에 유리한 벽체 구성은 1) 공기층 추가 및 실내 측으로 방습지 이동(P4), 2) 실내 측 방습지 추가(P1), 3) 기본벽체(T), 4) 공기층 추가(P3), 5) 실내 측 및 단열재 구간 방습지 추가(P2) 순으로 나타났다.

• 설비공학논문집
• /
• 제25권5호
• /
• pp.261-268
• /
• 2013

Technologies for preventing contaminants deposition are a key issue in a modern duct system. When particulate matters deposit inside the exhaust pipes, which are widely used in the Urea-SCR system to reduce $NO_x$ emission from heavy duty diesel engines, many problems arise associated with increased flow resistance and corrosion. Therefore, the development of the urea deposition avoidance technologies is being treated as an important issue of the Urea-SCR system. An analytical study was carried out to investigate the effects of the wall flow around the mixer with the variation of the mixer housing surrounding and supporting the mixer, which is designed to increase the wall flow and then to reduce droplet deposition. The housing angles and the position of the mixer were changed：angles of $0^{\circ}$, $1^{\circ}$, $2^{\circ}$, and $3^{\circ}$, and mixer positions of 0 L, 0.5 L, and 1 L. The axial velocity distributions, maximum velocity, the half-width, and momentum distribution of the wall flow were investigated to examine the effect of the mixer-housing assembly geometry.

• 한국유체기계학회 논문집
• /
• 제14권2호
• /
• pp.25-28
• /
• 2011

The control rod assemblies do freely fall into the reactor core by the gravity from the control rod drive mechanism. In order to achieve a rapid shutdown and control the reactor power, it is required to insert control rod assemblies as soon as possible. In this paper, we evaluated the drop time and flow characteristics caused around guide tube for SMART(System-integrated modular advanced reactor) control rod assembly. Numerical analyses are carried out with FLUENT program of computational fluid dynamics. This study results show that the drop time of the control rod assembly in the operating condition of SMART is more 20 percent rapidly than the drop time of the room temperature and ambient atmosphere condition.