• 대기
• /
• 제26권4호
• /
• pp.635-647
• /
• 2016

The effects of sea surface temperature (SST) gradient induced by the previous typhoon on the following typhoon motion over East Asia have been investigated using Weather Research and Forecasting (WRF) model for the previous Typhoon Bolaven (1215) and following Typhoon Tembin (1214). It was observed that Typhoon Bolaven remarkably reduced SST by about $7^{\circ}C$ at Yellow Sea buoy (YSbuoy). Using the WRF experiments for the imposed cold wake over West of Tembin (WT) and over East of Tembin (ET), this study demonstrates that the effects of eastward SST gradient including cold wake over WT is much significant rather than that over ET in relation to unexpected Tembin's eastward deflection. This difference between two experiments is attributed to the fact that cold wake over WT increases the magnitude of SST gradient under the eastward SST gradient around East Asia and the resultant asymmetric flow deflects Typhoon Tembin eastward, which is mainly due to the different atmospheric response to the SST forcing between ET and WT. Therefore, it implies that the enhanced eastward SST gradient over East Asia results in larger typhoon deflection toward the region of warmer SST according to the location of the cold wake effect. This result can contribute to the improvement of track prediction for typhoons influencing the Korean Peninsula

• 한국항공우주학회지
• /
• 제38권7호
• /
• pp.629-636
• /
• 2010

본 논문에서는 시간전진 자유후류 모델이 고려된 비정상 패널 코드를 이용하여 비정상 로터-동체 상호작용에 대한 수치적 해석기법에 대한 연구를 수행하였다. 이전 개발된 시간전진 자유후류 모델이 고려된 비정상 패널 코드는 후류와 깃(Blade)이 아주 근접한 경우에 불안정성이 발생하였다. 이를 제거하기 위해 장속도 기법을 적용하여 코드를 개선하였다. 개선된 코드를 이용하여 NASA에서 실험된 ROBIN(ROtor Body Interaction) 형상에 대한 해석을 수행하였다. 로터가 있을 때와 없을 때의 동체 표면 압력과 유도 유입류의 비를 실험결과 및 기존 수치해석 결과들과 비교하였다. 개발된 코드는 로터-동체 상호 작용으로 인해 발생하는 유동 특성과 생성되는 복잡한 후류의 형상을 잘 예측하였다.

• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.861-867
• /
• 2014

In the present study, the flow around a circular cylinder at $Re=3.6{\time}10^6$ is numerically simulated using URANS approach. The objective of this study is to evaluate the turbulence models(Realizable k-${\varepsilon}$, RNG k-${\varepsilon}$) through the prediction of the unsteady flow characteristics around the cylinder. The time-averaged drag coefficients and vortex shedding phenomenon in the wake region are compared to available experimental data and other numerical results. The simulation with Realizable k-${\varepsilon}$ model is found to be more dissipative due to large eddy viscosity predicted in the wake region while the simulation with RNG k-${\varepsilon}$ model predicts a complex vortex shedding phenomenon with more coherent structures realistically.

• 한국유체기계학회 논문집
• /
• 제3권2호
• /
• pp.15-23
• /
• 2000

The present work describes the prediction method for the unsteady flow field and the acoustic pressure field of a ducted axial fan. The prediction method is comprised of time-marching free-wake method, acoustic analogy, and the Kirchhoff-Helmholtz BEM. The predicted sound signal of a rotor is similar to the experiment one. We assume that the rotor rotates with a constant angular velocity and the flow field around the rotor is incompressible and inviscid. Then, a time-marching free-wake method is used to model the fan and to calculate the flow field. The force of each element on the blade is calculated by the unsteady Bernoulli equation. Lowson's method is used to predict the acoustic source. The newly developed Helmholtz-Kirchhoff BEM lot thin body is used to calculate tile sound field of the ducted fan. The ducted fan with 6 blades is analysed and the sound field around the duct is calculated.

• 대한조선학회논문집
• /
• 제33권1호
• /
• pp.9-18
• /
• 1996

본 논문은 불균일한 선미 유동장에서 작동하는 프로펠러의 성능 해석을 위한 포텐셜을 기저로 한 판요소법을 기술하고 있다. 본 방법은 법선 다이폴과 쏘오스를 프로펠러의 날개, 허브, 그리고 후류면에 분포하였고, 비정상 유동의 해석 방법으로는 시간 전진법에 의한 방법을 취함으로써 다이폴의 세기를 미지수로 하는 적분방정식을 얻고, 이산화하여 수치적으로 계산하였다. 2차원 날개에 대한 수치해석을 수행하여 해석해와 비교함으로써 시간간격에 대한 수렴성을 확보하였다. 또한, DTRC 4118 프로펠러에 대하여 조화반류하에서 작동하는 프로펠러의 비정상 성능을 해석하여 실험치와 비교함으로써 시간영역에서 프로펠러의 비정상 성능해석이 가능함을 보였다.

• 대한조선학회논문집
• /
• 제30권1호
• /
• pp.73-86
• /
• 1993

균일 유동장 중에서 작동 중인 선박 프로펠러의 정상 성능 추정을 위하여 포텐셜을 기저로한 패널법을 기술하고 있다. 본 방법은 법선 다이폴과 쏘오스를 프로펠러 날개, 허브, 후류면에 분포함으로써 다이폴의 세기를 미지수로 하는 적분방정식을 얻고, 이산화과정을 거쳐 수치적으로 계산된다. 비평면 사각형 패널위에 있는 법선 다이폴에 의해 유기되는 포텐셜을 구하기 위하여 쌍곡면 요소를 채택하고 있다. Kutta 조건은 반복계산에 의해 날개 뒷날에서의 압력 점프를 없앰으로써 만족시킨다. 수렴성을 보이기 위하여 상세한 수치시험을 수행하였으며, 동시에 후류면 모형화가 성능에 미치는 영향도 조사하였다. 프로펠러의 단독 모형시험 결과와 수치추정 결과가 잘 일치하는 것을 보였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권2호
• /
• pp.145-153
• /
• 2010

In this work, the comprehensive structural dynamics codes including DYMORE and CAMRAD II are used to validate the higher harmonic control aeroacoustic rotor test (HART) II data in descending flight condition. A total of 16 finite elements along with 17 aerodynamic panels are used for the CAMRAD II analysis; whereas, in the DYMORE analysis, 10 finite elements with 31 equally-spaced aerodynamic panels are utilized. To improve the prediction capability of the DYMORE analysis, the finite state dynamic inflow model is upgraded with a free vortex wake model comprised of near shed wake and trailed tip vortices. The predicted results on aerodynamic loads and blade motions are correlated with the HART II measurement data for the baseline, minimum noise and minimum vibration cases. It is found that an improvement of solution, especially for blade vortex interaction airloads, is achieved with the free wake method employed in the DYMORE analysis. Overall, fair to good correlation is achieved for the test cases considered in this study.

• 한국가시화정보학회지
• /
• 제10권1호
• /
• pp.47-54
• /
• 2012

Single Stage To Orbit (SSTO) missions which require its engines to be operated at varying back pressure conditions, use engines operate at high combustion chamber pressures (more than 100bar) with moderate area ratios (AR 70~80). This ensures that the exhaust jet flows full during most part of the operational regimes by optimal expansion at each altitude. Aero-spike nozzle is a kind of altitude adaptation nozzle where requirement of high combustion chamber pressures can be avoided as the flow is adapted to the outside conditions by the virtue of the nozzle configuration. However, the thrust prediction using the conventional thrust equations remains to be a challenge as the nozzle plume shapes vary with the back pressure conditions. In the present work, the performance evaluation of a new aero-spike nozzle is being carried out. Computational studies are carried out to predict the thrust generated by the aero-spike nozzle in varying back pressure conditions which requires the unsteady pressure boundary conditions in the computational domain. Schlieren pictures are taken to validate the computational results. It is found that the flow in the aero-spike nozzle is mainly affected by the base wall pressure variation. The aerospike nozzle exhibits maximum performance in the properly expanded flow regime due to the open wake formation.

• 한국안전학회지
• /
• 제10권1호
• /
• pp.64-73
• /
• 1995

A preliminary study is performed in order to design an effective ventilation equipment for the control of possible pollutants in a workshop. To this end, the Patankar's SIMPLE methodology is used to investigate the flow characteristics of the contaminated thermal deflected jet which is encounted often in practical hood system. SIMPLE-Consistent algorithm is employed for the pressure-velocity coupling appeared in momentum equations. A two equation, k-$\varepsilon$ model is used for Reynolds stresses. The prediction data is compared well against the experimental results by Chang(1989). Considering the control of the wake due to its high turbulence together with the stagnant feature has been investigated in term of major parameters such as temperature and magnitude of the discharge velocity. Detailed discussions are made to reduce the size of the wake region which give rise to pollutant concentration stratification.

• Journal of Mechanical Science and Technology
• /
• 제15권10호
• /
• pp.1423-1433
• /
• 2001

A flow modeling method has been developed to analyze the flow in the annular base (rear- facing surface) of a circular engine nacelle flying at subsonic speed but with a supersonic exhaust jet. Real values of exhaust gas properties and temperature at an altitude of 30, 000 feet are employed. Potential flows of the air and gas streams are computed for the flow past a separated wake. Then a viscous jet mixing is superimposed on this inviscid solution. Conserva- tion of mass, momentum and energy for the wake flow field is achieved by multiple iterations with modest computer requirements.