• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1397-1403
• /
• 2011

In this paper, fabrication of sample holder was studied for an analysis of electromagnetic(EM) wave property in W-band(75 GHz~110 GHz). First of all, a propagation theory of EM wave was considered in the rectangular waveguide, and measurement technique was suggested for analysis of characteristics. A sample holder using in W-band was designed and fabricated, and used for analysis of material property and absorption ability using RAM samples. As a result, the sample holder test was verified exactly for measuring EM wave property of RAM sample. In the future, the proposed sample holder would like to be used for the EM wave property analysis in W-band.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.410-413
• /
• 2003

We have developed the measurement system for the high power laser The absorber is made of gold-plated copper cavity. The calibration heater is using a manganin(CuMn12Ni ; Isabellenhutte) coil, and output power is measured by using of resistance bridge with composed manganin and copper coil. Developed system can measure for 5∼1000w laser output power range. Calibration factors are 489.13 J/mV at 100W range and 489.13 J/mV at 500W range. Correction factors are 0.99 at 100W range and 1.006 at 500W range.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.2
• /
• pp.4096-4104
• /
• 1976

This experiment was carried out to investigate the efficient turning method which will be able to use every cutting methods, to calculate the width of the center field which must transpose from rotary cutting method to return cutting method, to investigate the effects of L/W and unit field on the operation efficiency. The results are summarized as follows: 1. In case of cutting in the outer field, the efficient turning method is the "$\alpha$" type turning method (half U-shaped turning method) at the first rotation, is the "$\beta$" type turning method (T-shaped turning method) at the second to fourth rotation. 2. In case of cutting in the inner field, the efficient turning method which takes the least turning time is the "a" type turning method ($\Delta$-shaped turning method). 3. The width of the center field (W') changes by the length-width ratio (L/W) and width (W), W' is 9.0m in case that L/W is 2.5 and W is 30m. 4. The larger L/W and area of unit field (A) become, the more operation efficiency (E) increases, and the limits that E is affected signicantly by L/W is 2 to 3.5 and A is within 5,000$m^2$. within 5,000$m^2$.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.560-567
• /
• 2004

In this paper, the design and implementation of a high power(300W) forward converter using a planar transformer is presented. The overall size and volume of the converter is decreased by replacing a planar transformer in stead of using a conventional winding transformer. Due to the decreased size and volume, power density of the applied forward converter is increased. Also, in this paper, the 300W ZVS forward converter with active clamp snubber circuit is compared to the 300W hard switching forward converter planar transformer, the decreased size and volume, the 300W ZVS forward converter with active clamp snubber circuit, 30W hard switching forward converter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.306-313
• /
• 2007

In this paper, we efficiently implemented turbo code algorithm in FPGA H/W(hardware) resource. The used turbo code algorithm has the characteristics; the size of constraint is 3, encoder type is 1/3, the size of random interleaver is 2048. The proposed H/W consists of MAP block for calculating alpha and delta using delta value, storing buffer for each value, multiplier for calculating lamda, and lamda buffer. The proposed algorithm and H/W architecture was verified by C++ language and was designed by VHDL. Finally the designed H/W was programmed into FPGA and tested in wireless communication environment for field availability. The target FPGA of the implemented H/W is VERTEX4 XC4VFX12-12-SF363 and it is stably operated in 131.533MHz clock frequency (7.603ns).

• Korean Journal of Veterinary Research
• /
• v.11 no.2
• /
• pp.145-148
• /
• 1971

Serum Samples from adult of Korean cattles including 40 females and 20 males were analyzed by sodium salt precipitation and colorimetric method in the purpose of the determination of total serum protein, albumin, globulin, ${\alpha}$-globulin, ${\beta}$-globulin and ${\gamma}$-globulin. The results obtained arc summarized as follows: 1. Mean value of total serum protein showed a slight variation from 7.6%, and its regional and sex differences were not found to be significant. 2. Contents of albumin in serum showed lower level than that of globulin as low level of A/G ratio 0.4 in proportion. 3. Contents of Serum ${\alpha}$-globulin showed 1.4w/v% and $1.51{\pm}0.46$w/v% in each group of female, and $1.31{\pm}0.26$w/v%, in the group of male. 4. Contents of serum ${\beta}$-globulin showed 1.74w/v%, 1.95w/v%, in each group of female, and 1.82w/v% in the group of male. 5. Contents of serum ${\gamma}$-globulin showed 2.32w/v%, 2.30w/v% in each group of female, and 2.30w/v%, in the group of male.

• Journal of applied mathematics & informatics
• /
• v.20 no.1_2
• /
• pp.35-59
• /
• 2006

In this paper, we generalized the results of [23, 26], and get the results of the condition number of the W-weighted Drazin-inverse solution of linear system W AW\chi=b, where A is an $m{\times}n$ rank-deficient matrix and the index of A W is $k_1$, the index of W A is $k_2$, b is a real vector of size n in the range of $(WA)^{k_2}$, $\chi$ is a real vector of size m in the range of $(AW)^{k_1}$. Let $\alpha$ and $\beta$ be two positive real numbers, when we consider the weighted Frobenius norm $\|[{\alpha}W\;AW,\;{\beta}b]\|$(equation omitted) on the data we get the formula of condition number of the W-weighted Drazin-inverse solution of linear system. For the normwise condition number, the sensitivity of the relative condition number itself is studied, and the componentwise perturbation is also investigated.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.345-349
• /
• 2005

Low resistive ($300{\mu}{\Omega}$-cm) W-C-N films have been deposited on tetraethylorthosilicate (TEOS) interlayer dielectric by atomic layer deposition (ALD) with $WF_6-N_2-CH_4$ gas. The exposure cycles of $N_2$ and $CH_4$ are synchronized with pulse plasma. The W-C-N films on TEOS layer follow the ALD mechanism and keep constant deposition rate of 0.2 nm/cycle from 10 to 100 cycles. As a diffusion barrier for Cu interconnection the W-C-N films maintain amorphous phase and Cu inter-diffusion is not occurred even at $800^{\circ}C$ for 30 min.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.28-30
• /
• 1992

Long incubation period of W nucleation on the TiN glue layer is a serious problem in blanket W process. In this study we investigated the dependence of W nucleation and growth rate on the preparation method of the TiN film, deposition temperature, chemistry, $SiH_4/WF_6$ ratio and sputter etching, ion implantation, and $SiH_4$ flushing pre-treatments. Incubation periods of W nucleation and deposition rates of W growth on three different TiNs are in the order of TiN>RTP-TiN> annealed TiN and TiN${\leq}$RTP-TiN${\leq}$ annealed TiN, respectively. $\beta$-W is not found on TiN substrate even for high $SiH_4/WF_6$ ratio. Sputter etching pre-treatment increases incubation period of W nucleation, while it decreases deposition rate. $SiH_4$ flushing pre-treatment decreases incubation period, but it slightly decreases deposition rate.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.1
• /
• pp.105-109
• /
• 2004

This study was conducted to investigate the potential origin of Weissella species, which were found in ingredients of kimchi, such as salted Chinese cabbage, radish, green onion, red pepper powder, pickled shrimps, garlic, and ginger. Ten strains of Weissella species (Weissella thailandensis, W. kimchii, W. koreensis, W. minor, W. halotolerans, W. hellenica, W. kandleri, W. confusa, W. viridescens, and W. paramesenteroides) and lactic acid bacteria isolated from ingredients of kimchi were analyzed by SDS-PAGE of whole-cell proteins. Several strains with patterns identical to those of Weissella kimchii were isolated from green onion. On the basis of biochemical characteristics and 16S rDNA sequence comparisons, these strains were identified as Weissella kimchii, suggesting green onion as a major origin of Weissella kimchii found in kimchi.