• Bulletin of the Korean Mathematical Society
• /
• v.50 no.1
• /
• pp.161-173
• /
• 2013

This paper is concerned with the space $\mathcal{K}_{w^*}(X^*,Y)$ of $weak^*$ to weak continuous compact operators from the dual space $X^*$ of a Banach space X to a Banach space Y. We show that if $X^*$ or $Y^*$ has the Radon-Nikod$\acute{y}$m property, $\mathcal{C}$ is a convex subset of $\mathcal{K}_{w^*}(X^*,Y)$ with $0{\in}\mathcal{C}$ and T is a bounded linear operator from $X^*$ into Y, then $T{\in}\bar{\mathcal{C}}^{{\tau}_{\mathcal{c}}}$ if and only if $T{\in}\bar{\{S{\in}\mathcal{C}:{\parallel}S{\parallel}{\leq}{\parallel}T{\parallel}\}}^{{\tau}_{\mathcal{c}}}$, where ${\tau}_{\mathcal{c}}$ is the topology of uniform convergence on each compact subset of X, moreover, if $T{\in}\mathcal{K}_{w^*}(X^*, Y)$, here $\mathcal{C}$ need not to contain 0, then $T{\in}\bar{\mathcal{C}}^{{\tau}_{\mathcal{c}}}$ if and only if $T{\in}\bar{\mathcal{C}}$ in the topology of the operator norm. Some properties of $\mathcal{K}_{w^*}(X^*,Y)$ are presented.

• Journal of the Korean Magnetics Society
• /
• v.5 no.3
• /
• pp.191-196
• /
• 1995

NiCuZn ferrites were prepared by a solid-state reaction and sintered at $900^{\circ}C$ for 5 hours. Its properties were investigated by controlling the ferrite composition and processing. NiCuZn ferrite with a composition of ${(Ni_{0.2}Cu_{0.2}Zn_{0.6}O)}_{1.02}{(Fe_{2}O_{3})}_{0.98}$ was found to have the maximum initial permeability as a result of the variation of Cu content and the (Ni+Cu)/Zn ratio. Curie temperature($T_{c}$) of NiCuZn ferrite was decreased with the larger Cu content and increased with the larger Ni content. NiCuZn ferrites of ${(Ni_{0.2}Cu_{0.2}Zn_{0.6}O)}_{1-w}{(Fe_{2}O_{3})}_{1+w}$ composition milled for 20~80 hours had the maximum initial permeability at w=-0.015 and Curie temperature ($T_{c}$) was decreased with the increasing of $Fe_{2}O_{3}$ deficiency(w).

• The Korean Journal of Mycology
• /
• v.23 no.4 s.75
• /
• pp.298-304
• /
• 1995

Decolorization of poly R-478, congo red and methylene blue by 5 white rot fungi which were isolated in Korea has been carried out. Coriolus versicolor KR-11W and C. versicolor KR-65W gave the best results when they were grown under stationary culture. C. versicolor KR-11W decolorizes 100% of poly R-478 in 13 days, 100% of congo red in 7 days and 90% of methylene blue in 7 days. C. versicolor KR-65W decolorizes 100% of poly R-478 in 15 days, 85% of congo red in 7 days and 100% of methylene blue in 7 days. Phanerochaete chrysosporium IFO 31249, which was used as a control, decolorizes 35% of poly R-478 in 15 days, 85% of congo red in 7 days and 95% of methylene blue in 7 days.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.111-116
• /
• 1997

In this paper, the limit temperature for applying maturity method are discussed. 4 kinds of W/C in combination of 7kinds of curing temperature are selected as experimental parameters. According to the experimental results, high curing temperature and low W/C gain in strength rapidly. And maturity rule can be applied less than $30^{\cire}C$ in W/C of 30~60% in the conditions of this experiment.

• Journal of Powder Materials
• /
• v.11 no.2
• /
• pp.149-157
• /
• 2004

High temperature deformation behavior of activated sintered W powder compacts was investigated. The compression tests were carried out in the temperature range between 900 and 110$0^{\circ}C$ at the strain rate of $10^{-3}s^{-1}$. The sintered specimens of Ni-doped submicron W powder compacts showed decrease in W grain size with increasing the Ni content. As the result, the flow stress was significantly increased with increasing the Ni content. We obtained Ni-activated sintered W compacts with the relative density of 94 $\pm$ l％and the average grain size of less than 5${\mu}{\textrm}{m}$. A moderate true strain up to 0.60 was obtained without fracture even at 110$0^{\circ}C$ with the strain rate of $10^{-3}s^{-1}$ for the activated W compact despite adding the 1.0 wt％Ni to submicron W powder.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.4
• /
• pp.3611-3616
• /
• 1974

Alluvial plain of the coast of Kum river tail were found as being mostly consisted of weak foundation. The settlement of the ground, density and change of moisture content which were formed by the load due the construction of earth works were disclossed by the field investigations and laboratory tests. The results are as follow, 1) Banking materials are SM and soft soil stratum is CL. 2) Field moisture content; Wf=19-1.37c c; percentage of clay (less than 0.005mm) 3) optimum water content and maximum density of banking materials; rt=2.15$\mid$0.0165W(12%24%) 4) Density and moisture coutent of banking materials; rt=2.146-0.0095W (8%50%) 5) Density and moisture content of weak foundation; rt=2.06-0. 007W After construction (20%50%) Befor construction (40%60%) 6) Load and settlement of weak foundation; Everage settlement ratio; 12% of actual load p Maximum settlement ratio; 19% of actual load p Minimum settlement ratio: 5% of actual load p 7) Relation of cohesion and unconfined compression test value; c=1/2qu (qu<0.5kg/$\textrm{cm}^2$) c=1/3qu (qu<0.5kg/$\textrm{cm}^2$)

• Journal of Pharmaceutical Investigation
• /
• v.37 no.4
• /
• pp.217-222
• /
• 2007

To develop cleansing tissue composed of silicone multiple emulsions which could easily remove make-up residues and confer skin protecting effect without damaging skin, we formulated various silicone multiple emulsions and evaluated the physicochemical properties including viscosity, cleansing effect, and safety effect. Also, cleansing tissue incorporated with silicone multiple (W/Si/W) emulsion was stored for 6 months, and judged its stability through microscopes under accelerated and long-term condition. Cleansing effect was evaluated by chromameter. Skin hydration effect was determined by corneometer and incorporation effect into non-woven fabric cotton was evaluated by volunteer survey. Low viscosity ranged from 400 centipoise (cP) to 1,000 cP was obtained from a stabilized W/Si/W emulsion containing more than 10% volatile silicone. Mean diameter of fresh W/Si/W emulsion was $20{\mu}m$, but after storage for 3 months at $45^{\circ}C$, the particle size of the W/Si/W emulsion increased up to $50{\mu}m$. Both W/Si/W emulsion-incorporated cleansing tissue and commercial product showed equally good cleansing effect. In addition, skin allergies such as erythema, edema, scaling itching, stinging, burning, tightness and prickling were not observed through macroscopic examination. From the transepidermal water loss results, the cleansing tissue consisting of W/Si/W emulsion showed superior hydration effect to commercial product. In conclusion, this study suggests cleansing tissue using W/Si/W emulsion could be used for an excellent efficacy compared with commercialized cleansing tissue.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.8 no.3
• /
• pp.1-11
• /
• 2012

Mongolia has three(3) geothermal zones and eight(8) hydrogeothermal systems/regions that are, fold-fault platform/uplift zone, concave-largest subsidence zone, and mixed intermediate-transitional zone. Average temperature, heat flow, and geothermal gradient of hot springs in Arhangai located to fold-fault platform/uplift zone are $55.8^{\circ}C$, 60~110 mW/m2 and $35{\sim}50^{\circ}C/km$ respectively and those of Khentii situated in same zone are $80.5^{\circ}C$, 40~50 mW/m2, and $35{\sim}50^{\circ}C/km$ separately. Temperature of hydrothermal water at depth of 3,000 m is expected to be about $173{\sim}213^{\circ}C$ based on average geothermal gradient of $35{\sim}50^{\circ}C/km$. Among eight systems, Arhangai and Khentii located in A type hydrothermal system, Khovsgol in B type, Mongol Altai plateau in C type, and Over Arhangai in D type are the most feasible areas to develop geothermal power generation by Enhanced Geothermal System (EGS). Potential electric power generation by EGS is estimated about 2,760 kW at Tsenher, 1,752 kW at Tsagaan Sum, 2,928 kW at Khujir, 2,190 kW at Baga Shargaljuut, and 7,125 kW at Shargaljuut.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.408-412
• /
• 2010

내화수림대 조성을 위하여 난대수종 중 내화성 수종을 선발하고자 콘칼로미터를 이용하여 5수종(감탕나무, 구실잣밤나무, 동백나무, 붉가시나무, 후박나무)을 대상으로 수피, 가지, 생엽 등 부위별 연소특성을 분석하였다. 난대수종의 평균 열방출율(HRR)은 감탕나무($167.66kW/m^2$)>구실잣밤나무($142.80kW/m^2$)>동백나무($116.78kW/m^2$)>후박나무($95.48kW/m^2$)>붉가시나무($79.80kW/m^2$) 순으로 나타났다. 따라서, 붉가시나무가 산불 발생시 다른 수종에 비해서 화재강도가 낮은 것으로 사료된다. 수종별 부위(생엽, 가지, 수피)의 착화특성을 분석한 결과, 생엽에서 최초자연발화온도는 동백나무, 감탕나무($697^{\circ}C$)>후박나무($672^{\circ}C$)>구실잣밤나무($663^{\circ}C$)>붉가시나무($658^{\circ}C$) 순으로 나타났으며, 가지에서는 구실잣나무($671^{\circ}C$)>후박나무($669^{\circ}C$)>감탕나무($661^{\circ}C$)>붉가시나무($657^{\circ}C$)>동백나무($591^{\circ}C$) 순으로 나타났으며, 수피에서 동백나무($839^{\circ}C$)>후박나무($804^{\circ}C$)>동백나무($784^{\circ}C$)>붉가시나무($780^{\circ}C$)>감탕나무($749^{\circ}C$) 순으로 나타났다. 수종별 부위에 있어서 최초자연발화온도가 다른 것은 수종에 따라 조직과 세포간극 형태에 따라 수분함량의 차이가 착화특성을 다르게 나타내는 것으로 사료된다.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.1
• /
• pp.39-44
• /
• 2000

We reinvestigate UV line emissions of 44i Boo, W UMa, AW UMa and VW Cep, which are indicaters of chromospheric activity of these stars. C I, C II, C IV, Si IV lines show significant variation in orbital phase. Among those lines, the Line of C IV showed the strongest line flux. while other Si IV and N V lines showed relative low line intensities. 44i Boo emitted the strongest flux than other stars. UV light curves of target stars shoed UV maximum at phase around 0.2 an 0.8 Such UV emissions are generally believed to be observed at the active regions and contacting parts of the two stars due to the clear visibility at the phase 0.2 and 0.8. Total emissivity of four transitions lines lead to conclude that the activity of this region is 40 times larger than the quiet sun. It is obvious that the activity decrease according to increase period. We obtained also Mg II light curve of AW UMA and VW Cep. These stars showed more clearly phase-dependent light curves. We estimated effective temperature of two star, AW UMa and VW Cep, using by Mg II flux.