• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.92-99
• /
• 2013

The ratio of mobility handicapped was 12,110,000 in late 2009 about 24.4% of total population. The number of handicapped population is increasing continuously due to traffic accidents and industrial disasters. Therefore, the purpose of this research is to suggest a design for passengers on wheelchairs to get into and off to raise handicapped or elderly people's right of mobility. The scope of this research is mobility handicapped especially wheelchair passengers who use vans, small buses, and trains. The ramp design of vans is module form. The ramp is moved with screw jack and guides are installed on each side to increase stability. Moreover, a bridge was installed for smooth getting in and off of the van. The ramp design for small bus is lowed by 200m in order not to have obstacle such as speed bump when getting in or off. In order to reduce vulnerable environment and administration, air slide cylinder was chosen. Lastly, for the ramp design of train, the principle of link was used that the simpler structure made the weight lighter and installation in the train became easier. If we look at the conjugation condition of heterogeneous materials to produce a ramp, proper welding condition for cold steel plate and stainless plate is 3kW output and 3-5m/min of welding speed using laser beam seems proper.

• 대한공간정보학회지
• /
• 제15권1호통권39호
• /
• pp.39-46
• /
• 2007

강원도 지역은 산지지형이 많고 여름철 장마나 이상기후에 의한 국지적인 집중호우에 의해서 산사태가 발생하기 쉬운 자연조건을 가지고 있는데, 특히 강우는 산사태를 유발하는 직접적인 원인이 되는 요소이다. 산사태 발생면적과 4개월간의 누적강우량과의 관련성을 분석해 보면, 3개월간의 강우량이 1,100mm 이상이 되는 지역에서는 극심한 산사태 피해가 발생하게 되고 누적강우량이 많을수록 산사태의 규모도 커진다. 이러한 분석결과는 산사태 취약지역에서 강우에 의해 산사태가 발생할 가능성이 있다는 것을 의미함과 동시에 일정이상의 강우가 발생하면 취약성이 낮은 지역에서도 산사태가 발생할 가능성이 충분히 존재함을 의미한다. 따라서 이 연구에서는 강원도 남부지역을 대상으로 산사태 유발인자들에 대한 GIS DB를 구축하고 산사태 취약성을 평가한 자료를 이용하여, 강우조건을 달리하면서 산사태 취약지의 분포 변화를 모의 실험하였다. 그 결과 강우량이200mm이상 발생하였을 때 산사태 발생가능성이 생성되는 것을 확인할 수 있었다.

• 한국직업건강간호학회지
• /
• 제6권2호
• /
• pp.79-95
• /
• 1997

The purposes of this study were to develop a job stress measurement tool and to identify the job stress according to the characteristics of worker and work condition at the small and medium-sized plants. Data were collected through face-to-face survey for April-May, 1997. Subjects were 180 workers at 36 small and medium-sized plants located near Seoul. Data were analyzed by item analysis, factor analysis, and ANOVA. The results were as follow : 1, Number of items of job stress measurement were 33 and Cronbach's $\alpha$ was .9262 except 13 items with low values of Cronbach's coefficient. Factor analysis was done in order for construct validity and 8 factors were extracted and cumulative percent of variance was 65.6%. 2. The job stress scores of male, the younger, 2-shift workers, and over-time workers were significantly higher than those of female, the older, 1-shift workers, and 48 hour workers per week. 3. There were no significant difference between job stress scores and the groups by number of worker, and the types of manufacturing. The stress measurement tool is valid and very reliable to measure worker's stress. Furthermore, the job stress managent program for health promotion of the workers at the vulnerable work condition is needed more and more.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2315-2325
• /
• 2015

Induction motors are widely used in industrial processes since they offer a very high degree of reliability. But like any other machine, they are vulnerable to faults, which if left unmonitored, might lead to an unexpected interruption at the industrial plant. Therefore, the condition monitoring of the induction motors have been a challenging topic for many electrical machine researchers. Indeed, the effectiveness of the fault diagnosis and prognosis techniques depends very much on the quality of the fault features selection. However, in induction-motor drives, rotor defects are the most complex in terms of detection since they interact with the supply frequency within a restricted band around this frequency, especially in the no-loaded case. To overcome this drawback, this paper deals with an efficient and new method to diagnose the induction-motor rotor fault based on the digital implementation of the monitoring algorithm based on the association of the Time Synchronous Averaging technique and Discrete Wavelet Transform. Experimental results are presented in order to show the effectiveness of the proposed method. The obtained results are largely satisfactory, indicating a promising industrial application of the combined “Time Synchronous Averaging – Discrete Wavelet Transform” approach.

• 한국농공학회논문집
• /
• 제60권6호
• /
• pp.55-63
• /
• 2018

This paper aimed to characterize the spatial and temporal pattern of agricultural drought in Pre-Kharif season using Vegetation Health Index (VHI) and illustrated drought characteristics in Bangladesh during 2001-2015. VHI was calculated from TCI (Temperature Condition Index) and VCI (Vegetation Condition Index) derived from MODIS Terra satellite data, LST (Land Surface Temperature) and EVI (Enhanced Vegetation Index), respectively. The finding showed that all drought-affected areas were experienced by mild, moderate, severe and extreme droughts in several years of Pre-Kharif seasons. Significant drought events were found in the year of 2002 and 2013. On average, Chittagong district covered the largest drought area in all drought stages, and the fraction of drought area was the highest in Sylhet and Rangpur for Pre-Kharif season. Finally, overlaying annual VHI raster maps resulted in that the most vulnerable district to agricultural drought were Sylhet, Rangpur, and Mymensingh in the northern and eastern regions of Bangladesh.

• 수산해양교육연구
• /
• 제28권3호
• /
• pp.831-840
• /
• 2016

Hydrodynamic condition can be used to predict particle movement within water column and the results used to optimize environmental conditions for effective site selection, setting of environmental quality standard, waste dispersion, and pathogen transfer. To predict the extent of movement of particle from land, 3D hydrodynamic model that includes particle tracking module was applied to Geoje Bay and to calibrate particle tracking model, floating buoy measurement is operated. The model results show that short time is required for particles released into system from river to be transported to the shellfish farming area. It takes about 2 days for the particles to shellfish farming area under mean flow condition. It meant Geoje Bay, especially shellfish farming area is vulnerable to anthropogenic waste from river.

• The Plant Pathology Journal
• /
• 제29권4호
• /
• pp.471-476
• /
• 2013

Plants are frequently exposed to numerous environmental stresses such as dehydration and high salinity, and have developed elaborate mechanisms to counteract the deleterious effects of stress. The phytohormone abscisic acid (ABA) plays a critical role as an integrator of plant responses to water-limited condition to activate ABA signal transduction pathway. Although perception of ABA has been suggested to be important, the function of each ABA receptor remains elusive in dehydration condition. Here, we show that ABA receptor, pyrabactin resistance-like protein 8 (PYL8), functions in dehydration conditions. Transgenic plants overexpressing PYL8 exhibited hypersensitive phenotype to ABA in seed germination, seedling growth and establishment. We found that hypersensitivity to ABA of transgenic plants results in high degrees of stomatal closure in response to ABA leading to low transpiration rates and ultimately more vulnerable to drought than the wild-type plants. In addition, high expression of ABA maker genes also contributes to altered drought tolerance phenotype. Overall, this work emphasizes the importance of ABA signaling by ABA receptor in stomata during defense response to drought stress.

• 디지털산업정보학회논문지
• /
• 제16권1호
• /
• pp.1-10
• /
• 2020

This paper is a IoT-based radon meter control system and a radon meter control method using it. The IoT-based radon meter control system is control system for controlling a radon meter by network-connecting radon meter and a user terminal. The radon measuring device may be provided with a radon sensor to measure a radon value of a preset management target area, it collect and store numerical data. The radon meter control system monitors the condition of the radon meter, it includes control center configured to deliver radon meter management information generated to a user terminal. Also radon measurements to determine the exact amount of radon gas. Therefore, the situation-specific actions based on radon numbers can be promptly implemented to ensure adequate protection for those who are vulnerable to radon and those who live in the area. Condition monitoring allows the radon meter to respond quickly to failure or failure of the radon meter. In addition, it is possible to secure a baseline of radon's influence and to obtain research data to cope with radon by establishing big data with radon measurements.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.36-39
• /
• 2014

We report on the superconducting and structural characteristics of Pb-based alloy ($Pb_{0.9}In_{0.1}$, $Pb_{0.8}In_{0.2}$ and $Pb_{0.85}Bi_{0.15}$) thin films, depending on the film deposition rate. The maximum critical magnetic field strength of $Pb_{0.85}Bi_{0.15}$ is almost six times larger than that of $Pb_{0.9}In_{0.1}$, and more rapid growth of the film enhances the critical magnetic field strength even for the same alloy material. Scanning electron microscopy inspection indicates that lower deposition rate condition is vulnerable to the formation of void structure in the film. Topographic images using atomic force microscopy are useful to optimize the deposition condition for the growth of smooth superconducting film. Our work can be utilized for future studies on hybrid superconducting devices using low-dimensional nanostructures.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권5호
• /
• pp.591-595
• /
• 2010

본 논문에서는 자동화 컨테이너 터미널에서 컨테이너를 운반하는데 사용되는 무인 운반 차량(AGV)의 교통흐름을 동적으로 최적화하는 방안을 제안한다. 터미널 환경은 다수의 차량이 한정된 영역 내에서 주행하므로 높은 생산성을 위해서는 차량 사이의 간섭 및 병목현상을 최소화하도록 교통흐름을 제어해야 한다. 제안 알고리즘은 터미널 환경의 동적 변화에 대응하여 유전알고리즘을 이용하여 AGV의 교통흐름을 최적화한다. 알고리즘의 속도향상을 위해 이전에 수행한 최적화 결과를 활용하는 방안이 시도되었다. 시뮬레이션 실험을 통해 제안 알고리즘의 성능을 확인하였다.