• Bulletin of the Korean Chemical Society
• /
• 제21권6호
• /
• pp.628-634
• /
• 2000

Crosslink is the most important chemistry in a rubber vulcanizate. Degree and type of crosslinks of the vulcanizate determine its physical properties. Change of crosslink density and deformation of a rubber vulcanizate by thermal aging were studied using natural rubber (NR) vulcanizates with various cure systems (conventional, semi-EV, and EV) and different cure times (under-, optimum-, and overture). All the NR vulcanizates were deformed by the thermal aging at 60-100 $^{\circ}C.$ The higher the aging temperature is, the more degree of the deformation is. The undercured NR vulcanizates after the thermal aging were deformed more than the optimumand overcured ones. The NR vulcanizates with the EV cure system were less deformed than those with the conventional and semi-EV cure systems. The deformation of the NR vulcanizates was found to be due to change of the crosslink density of the vulcanizates. The crosslink densities of all the vulcanizates after the extraction of organic materials were also changed by the thermal ging. The sources to change the crosslink densities of the vulcanizates by the thermal aging were found to be dissociation of the existing sulfur crosslink and the formation of new crosslinks by free sulfur, reaction products of curing agents, and pendent sulfide groups.

• Bulletin of the Korean Chemical Society
• /
• 제19권2호
• /
• pp.174-178
• /
• 1998

Blowout of NR and SBR vulcanizates was studied using a microwave oven. Rubber vulcanizates with different contents of carbon black (0, 30, 50, 70 phr) and various cure systems (conventional, semi-EV, and EV) were prepared. Unfilled rubber vulcanizates did not exploded by irradiation of microwave, while carbon black-filled ones exploded within 10 min. A blowout time of the carbon black-filled rubber vulcanizate decreases with an increase of the content of carbon black in the vulcanizate. A blowout temperature of the organic additive-extracted vulcanizate is higher than that of the not-extracted one, but the extracted vulcanizate blows out faster than the not-extracted one. A blowout temperature of the overcured vulcanizate is higher than that of the undercured one with the same cure system. Temperatures of unfilled SBR vulcanizates heated by the microwave irradiation are lower than those of unfilled NR ones. The carbon black-filled SBR vulcanizates blow out at higher temperatures than the carbon black-filled NR ones. Blowout times of the carbon black-filled SBR vulcanizates are longer than those of the carbon black-filled NR ones.

• Macromolecular Research
• /
• 제13권1호
• /
• pp.30-38
• /
• 2005

Sulfur-cured gum natural rubber vulcanizates were devulcanized using two different concentrations of diallyl disulfide. The devulcanization process was performed at $110^{\circ}C$ min in an open two-roll cracker-cum-mixing mill. Natural rubber vulcanizates having various sulfur/accelerator ratios were used to study the cleavage of monosulfide, disulfide, and polysulfide bonds. The properties of devulcanized natural rubber increased upon increasing the disulfide concentration and the mechanical properties of the revulcanized natural rubber increased upon decreasing the sulfur content in the original rubber vulcanizates. The scorch time and the maximum state of cure both increased when the ground vulcanizates were treated with higher amounts of disulfide. TGA and DMA were conducted to study the effects of the devulcanization on the thermal stability and the $T_g$ behavior of the vulcanizates. SEM analysis was conducted to study how the failure mechanism was affected by the devulcanization process. It was possible to recover $70-80\%$ of the original gum rubber properties by using this process. From IR spectroscopic analysis, we observed that the oxidation of the main chains did not occur during high-temperature milling.

• Elastomers and Composites
• /
• 제20권3호
• /
• pp.189-204
• /
• 1985

The purpose of this study is to examine the dynamic properties, especially the damping and fatigue properites, of NR vulcanizates and to find out the vulcanizate which can be used as damping materials in industry. The results of this study can be summarized as follows: 1. In the ODR test, the S-2 vulcanizate was the fastest one in terms of having reached to optimum cure times($t_{90}$) and, with the same formula, when 50phr of HAF carbon black loaded, the shortest optimum cure times has shown. 2. The S - 2 vulcanizate was the best than the others in the physical properties. In aging properties, however, the E - 1 vulcanizate appeared to be better than the other vulcanizates. 3. The results of the RDS test for the NR vulcanization system under the condition of 0.1% strain amplitude and 1 Hz frequency showed no connection between Tg and the the nature of the crosslinking system, but 50phr loading of HAF carbon black increased Tg. The damping values of vulcanizates in the elastic region showed a strong relations the damping values and the crosslinking system. The S - 2 vulcanizate with higher crosslink density had lower damping values than other vulcanizates, and furthermore, the SH - 2 vulcanizates with 50phr loading of HAF carbon black increased the damping values. 4. The Goodrich Flexometer test showed that the heat buildup for the gum NR vulcanizates was less than for those which contained 50phr of HAF carbon black. In particular, the fatigue life of the vulcanizate with lower damping values appeared to be longer than that of the vulcanizates with higher damping values. In the fatigue test, the increasment of the loading or the temperature, applied to the vulcanizates, appeared to be shorten their fatigue life.

• 폴리머
• /
• 제24권2호
• /
• pp.220-227
• /
• 2000

충전물의 함량비 및 배합방법을 달리하여 실리카/카본블랙 충전 천연고무 가황물을 제조하였다. 충전물의 함량은 고무에 대해 70 phr이 되도록 하였으며, 이들을 동시에 배합하여 제조한 가황물과 실리카를 먼저 배합하고 일정 시간 경과 후 카본블랙을 배합하여 제조한 가황물의 가황특성, 모폴로지, 그리고 인열특성 및 크랙성장속도 등의 파열특성을 비교하였다. 가공시, 단계배합물은 동시배합물보다 경화 속도($t_{90}$ )는 약간 느렸으나, 긴 유도시간($t_2$), 낮은 최대 토오크 값($T_{max}$ )을 보였다. 단계 배합물은 인열특성 및 크랙성장 특성에 있어서도 상대적으로 우수함을 보였으며, 실리카의 함량이 30 phr인 경우에 가공성 및 파열 특성이 가장 우수하였다.

• Elastomers and Composites
• /
• 제20권1호
• /
• pp.13-24
• /
• 1985

It is generally agreed that strong linkages exist between rubber chains and reinforcing filler particles. The purpose of this study is to examine the effect of rubber-filler attachments on the various mechanical properties of the rubber. In particular, the modulus and strength will be altered by these attachments. For this study, the curing properties are examined by means of ODR (Oscillating Disk Rheometer), the physical properties by means of Instrong. The results of this study can be summarized as follows. In the ODR test, the carbon black filled stock has shorter scorch time than gum stock and, the silica and clay filled stock has longer scorch time than gum stock. In the modulus, ten sile and swelling properties, the vulcanizates filled with carbon black had higher those values than inorganic filler loaded NR vulcanizates, but the rebound rate showed that the silica filled NR vulcanizates was lower than other inorganic filler contained NR vulcanizates and the ISAF filled NR vulcanizates was lower than other carbon block contained NR vulcanizates.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.73-79
• /
• 2003

Generally, field performance of elastomeric track pad components has been poor, especially for the medium to heavy tonnage tracked vehicles, which are operated on the hilly cross-country course. The service life of these track pad, is affected not only by the terrain and environmental conditions but also by the speed, cornering, braking, weight of the vehicle, and the track tread design. In this research, modulus, tearing energy, and the rate of crack propagation of vulcanizates are evaluated by changing base materials to improve the service time of track pad. By increasing the contents of carbon black, modulus, tearing energy, and fatigue crack growth resistance of vulcanizates improved. Compared with the NR vulcanizate, the HNBR vulcanizate had a higher value of tearing energy. The rate of crack propagation of vulcanizates using smaller size carbon black was slower than that using larger size carbon black. When the HNBR was blended with the ZSC, the tearing energy of the vulcanizates was a little reduced because of the high modulus but the crack propagation rate was reduced significantly. In the relation between the crack propagation rate and the strain energy release rate, though up to 100% strain were applied to specimens, the slope on the log scale ($\beta$) varied between 1.72 and 2.3 with the kind of elastomer.

• Elastomers and Composites
• /
• 제22권4호
• /
• pp.293-304
• /
• 1987

The purpose of this study is to examine the effect of rubber-filler attachments on inorganic filler contained NR vulcanizatic. The results of this study showed as follows. The reinforcing properties and damping values of the vulcanizates in the elastic region showed strong relation with the filler characteristics and temperture. The vulcanizates filled with nature-activated inorganic filler like silica had higer elastic modulus and damping values than the vulcanizates of nature-nonactivated inorganic filter. The reinforcing effects of differential filler loadings on NR raised the effects with temperature rise, but the damping values varied with the filler characteristics and temperature variations.

• 대한화학회지
• /
• 제6권2호
• /
• pp.99-103
• /
• 1962

The usefulness of a propionylated paper chromatography to the identification of various insoluble organic antioxidants in rubber vulcanizates was studied. Purified commercial antioxidants and commercially mixed antioxidants could be identified by the propionylated paper chromatography. Antioxidants were identified by the propionylated paper chromatography from acetone extract of pure gum vulcanizates, which were either unaged or aged in Geer-Oven. The $R_f$ values from acetone extracts of vulcanizates were a little lower than those purified samples, but the colours and shapes of the spots support the identification. No spot could be obtained by the method from the aged vulcanizate containing antioxidant 200 (2,6 Di-tert-butyl-p-cresol). This indicates that the antioxidant was converted or decomposed to other compound after aging. It was concluded from the above results that the propionylated paper chromatography is useful to identify the antioxidants from vulcanizates and presents a key for elucidating the mechanism of the inhibition.

• 고무기술
• /
• 제5권2호
• /
• pp.94-103
• /
• 2004

The present work describes modification of dual phase filler by electron beam irradiation in presence of multifunctional acrylates like trimethylol propane triacrylate (TMPTA) or silane coupling agent like bis (3-triethoxysilylpropyltetrasulphide) and in-fluence of the modified fillers on the physical properties of styrene-butadiene rubber (SBR) vulcanizates. Modulus at 300 % elongation increases whereas the tensile strength decreases with increase in radiation dose for the dual phase filler loaded styrene-butadiene rubber vulcanizates (SBR). However, modulus and tensile strength significantly increase, which is more, pronounced at higher filler loadings for TMPTA modified dual phase filler loaded SBR. These changes in properties are explained by the equilibrium swelling data and Kraus plot interpreting the polymer-filler interaction. Electron beam modification of the filler results in a reduction of tan ${\delta}$ at $70^{\circ}C$, a parameter for rolling resistance and increase in tan ${\delta}$ at $0^{\circ}C$, a parameter for wet skid resistance of the SBR vulcanizates. Finally, the influence of modified fillers on the properties like abrasion resistance, tear strength and fatigue failure and the improvement in the properties have been explained in terms of polymer-filler interaction.