• Journal of Mechanical Science and Technology
• /
• 제14권4호
• /
• pp.441-447
• /
• 2000

Direct numerical simulation has been used to study turbulent boundary layers with convex curvature. A direct numerical simulation program has been developed to solve incompressible Navier-Stokes equations in generalized coordinates with the finite volume method. We considered two boundary layer thicknesses. When the curvature effect is small, mean velocity statistics show little difference with those of a plane channel flow. Turbulent intensity decreases as curvature increases. Contours suggest that streamwise vorticities are strong where large pressure fluctuations exist.

• 대한토목학회논문집
• /
• 제26권5B호
• /
• pp.459-467
• /
• 2006

본 연구에서는 화력발전소 순환수취수로의 유량증가가 취수펌프장 흐름에 미치는 영향을 해석하고 개선하기 위하여 수리 및 수치모형실험을 수행하였다. 수치모형실험결과에 의하면 화력발전소 순환수취수로의 유량이 증가하면 취수로내의 유속과 순환수취수 펌프장의 연직방향와도가 증가하여 순환수취수 펌프장내의 와류발생가능성이 크게 증가하는 것을 알 수 있었다. 수리모형실험을 수행하여 순환수취수펌프장 유입부의 수면 근처 흐름은 거의 균등한 유량 배분이 이루어지고 반면에, 바닥 근처의 흐름은 유량 배분이 균등하게 이루어지지 못하여 취수펌프장내에서 역류현상이 발생하는 것을 밝혀냈다. 삼각형 도류벽을 취수펌프장 유입부에 설치하여 유속분포의 불균일성을 제거할 수 있었고 역류발생문제를 제거하였다.

• 한국가시화정보학회지
• /
• 제15권2호
• /
• pp.21-25
• /
• 2017

If a liquid droplet evaporates on a solid substrate, when it completely dries, it leaves a peculiar pattern, which depends on the composition of the liquid. Not only a single component liquid but also complex liquids are studied for a different purpose. In particular, a binary mixture droplet has been widely studied and used for an ink-jet printing technology. In this study, we focus on investigating to visualize the internal flow field of an ethanol-water mixture by varying a concentration ratio between two liquids. We measure the in-plane velocity vector fields and vorticities. We believe that this fundamental study about the internal flow field provides a basic idea to understand the dried pattern of the binary mixture droplet.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권1호
• /
• pp.60-72
• /
• 1994

The effect of free stream tubulence on the coherent structure in the near wake of a circular cylinder was investigated by a conditional sampling technique. The measurements were made from C.T.A. with hot wire I-probe and a Split-film sensor. Contours of phase-averaged velocity and vorticities were presented and discussed. It was found that the value of the vortex strength increased with increasing free stream turbulence which can enhance the roll-up of the shear layer.

• 한국가시화정보학회지
• /
• 제8권4호
• /
• pp.26-30
• /
• 2010

A PTV algorithm was constructed using a linear transformation, in which the merits of the conventional PIV and PTV were adopted. In PIV calculations, the obtained velocity vectors are affected by the filtering effects by its calculation principle. PTV techniques are widely used for their excellences of measuring small scaled flows, such as nano and bio flows. However, PTVs produce vector errors due to interpolation process. To overcome these problems, a hybrid PTV algorithm was constructed by combining PTVs' and PIVs' benefits using a linear transformation. The Taylor-Green vortex flows were generated for the tests of vorticity calculations. The conventional gray-level cross-correlation PIV technique and 2-Frame PTV technique were tested for the same flows for comparisons with those obtained by the constructed hybrid algorithm. The excellence of the constructed hybrid algorithm was validated through an actual experiment on the cylinder wake.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.302-312
• /
• 1992

Three dimensional velocity measurements of a 35.deg. inclined jet issuing into turbulent boundary layer on both concave and convex surfaces have been conducted. To investigate solely the effect of each curvature on the flow field, streamwise pressure variations are minimized by adjusting the shape of the opposite wall in the curved region. From the measured velocity components, streamwise mean vorticities are calculated to determine jet-crossflow interface. The results on convex surface show that the injected jet is separated from the wall and the bound vortex maintains its structure far downstream. On concave surface, the secondary flow in the jet cross-sections are enhanced and in some downstream region from the jet exit, the flow on the concave surface has been developed to Taylor-Gortler vortices

• 한국수자원학회논문집
• /
• 제38권8호
• /
• pp.631-643
• /
• 2005

신설될 복합화력발전소 취수펌프장 계획안에 대하여 수치 및 수리모형실험을 수행하고 순환수취수펌프운영에 문제를 발생시킬 가능성이 발견되면 개선안을 도출하는 것이 본 연구의 목적이다. 수리모형은 1:20의 크기로 아크릴을 이용하여 제작되었고 2차원 수치모형실험은 RMA2모형을 이용하였다. 수리 및 수치모형실험의 결과를 평가하기 위하여 취수로 및 취수펌프장내 흐름에 대한 평가기준을 설정하였다. 복합화력발전소 취수펌프장의 계획안에 대한 2차원 수치모형실험을 통하여 얻어진 연직방향 와도를 수리모형실험결과와 비교하여 흐름평가기준의 하나인 와류발생 가능성을 평가하였다. 계획안은 취수펌프장내에서 큰 규모의 와류가 발생하여 순환수취수펌프운영에 문제를 발생시킬 수 있을 것으로 판단되었다. 이에 따라서 9개 개선안이 고안되어 수치모의되었다. 9개중 4개의 개선안에 대하여 수리모형실험이 수행되었다. 수리모형실험에 근거하여 4개의 개선안의 하나가 최종개선안으로 제시되었다. 공간적인 제약조건이 있는 순환수취수펌프장 및 취수로 설계의 경우 격벽과 도류벽을 이용하면 순환수취수펌프장의 흐름상황을 개선할 수 있는 것으로 나타났다.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.581-589
• /
• 2019

In order to understand the characteristics of beach deformation, in this study, numerical simulations were conducted using a 3-D hydro-morphodynamic model (HYMO-WASS-3D) to analyze the characteristics of beach deformation due to the coastal groundwater levels. HYMO-WASS-3D directly analyzed the nonlinear interaction between the hydrodynamic and morphodynamic processes in the coastal area. The simulation results of HYMO-WASS-3D showed good agreement with the experimental results on the changes in the profile of the beach in the surf and swash zones. Then, numerical simulations were conducted to examine the characteristics of beach deformation due to the variation of the level of the coastal groundwater. As a result, the beach profiles were examined in relation to the wave breaking in the surf zone and the wave uprush and backwash in the swash zone due to the differences in the water levels. This paper also discussed the temporal and spatial distributions of the velocities, vorticities, and suspended sediments in the surf and swash zones with various levels of the coastal groundwater.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.95-101
• /
• 2002

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a sin91e pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents. Hence, flow into the pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found within a sump of pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface due to different clearances from back-wall to vertical intake pipe with bell mouse and without. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.

• 물과 미래
• /
• 제21권3호
• /
• pp.291-291
• /
• 1988

2차원 흐름이 원주주위를 지날 때 발생하는 흐름의 변화가 기본방정식인 연속방정식과 운동량방정식에 의하여 수치적으로 해석된다. 수치해석 과정은 기본방정식에 유함수, 와도 및 흐름의 특성을 나타내는 무차원 매개변수를 도입하여 무차원 유함수-와소수송식을 유도한 후, successive over relaxation scheme과 alternating direct implicit scheme으로 수행된다. 수치실험은 레이놀즈수 125-275를 기존의 수치해석에서는 주로 수치실험 결과와 비교한다. 원주표면의 압력을 구하는 방법에 있어서 기존의 수치해석에서는 주로 방사 운동량방정식만을 사용하였으나, 본 논문에서는 기존의 방법외에 방사 운동량방정식 및 접선 운동량방정식에 의해 압력을 계한하고, 두 값을 비교하여 레이놀즈수에 따른 압력을 구하는 방법을 제시한다. 또한 와도의 분포를 도시하여 원주에 의한 후류의 영향을 받지 않는 외부경계의 한계를 새로이 설정한다.