• 한국의상디자인학회지
• /
• 제17권3호
• /
• pp.61-71
• /
• 2015

In this study, visual evaluation was performed with changes in peplums design to provide data which can enhance wearing image effects at the production of peplums one-piece. According to changes in volume and position of peplums, a total of 9 stimulants were chosen. Then, they were evaluated using a seven-point rating scale against 50 fashion students. The data has been analyzed by Factor Analysis, ANOVA, $Scheff{\acute{e}}$'s Test and the MCA method. The results of the study are as follows : 1. According to factor analysis, the components of visual evaluation depending on the changes in volume and position variations of peplums were divided into four factors: elegance, individuality, upper body correction and upper body emphasis. 2. According to visual evaluation depending on changes in the position variations of peplum, 'high waist' and 'natural waist' revealed a significant difference in elegance, individuality and upper body correction. 'Low waist' was observed in all four positions. 3. According to visual evaluation depending on the changes in volume of peplums, a significant difference at $45^{\circ}$ was observed in except for elegance. Significant differences at $90^{\circ}$ and $180^{\circ}$ were observed in all four positions. 4. In terms of interactions over in volume and position variations of peplums, interaction effects were found in two factors.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2782-2791
• /
• 1996

The effective longitudinal shear modulus(LSM) of continuous composites is studied theoretically and numerically using 3-phase unit cell model. Circular, hexagonal and rectangular shapes of reinforced fiber are considered to predict the shear modulus as a function of elastic modulus of each phase and volume fraction of interphase and reinforced fiber. It is found that rectangular fiber shape in low fiber volume fraction($v_f$<30%) and circular fiber shape in high volume fraction($v_f$>40%) shows the higher longitudinal shear modulus. Also the obtained values of LSM for rectangular array and by numerical analysis are higher than those of hexagonal array and by theoretical analysis respectively. The reinforcing effects of interphase are more significant in cases of higher fiber volume fraction and circular fiber shape. Not only the spatial distribution and shape of reinforcing fiber but also the volume of interphase have a pronounced effects on the overall LSM. It is also found that the tangent moduous of 2-and 3-phase polymer matrix composites is insensitive to the shape and distribution of reinforcing fibers.

• 수산해양교육연구
• /
• 제28권2호
• /
• pp.596-602
• /
• 2016

Experiments were carried out examine short-term effects of human chorionic gonadotropin (hCG) and long-term effects of luteinising hormone releasing hormone analogue (LHRHa) on milt production of the tongue sole Cynoglossus semilaevis. In the first experiment, each fish was implanted with a blank cholesterol pellet (control), 100 and $200{\mu}g$ LHRHa per kg body weight. In the second experiment, fish were injected with either 100, 200, 400 and 800 IU hCG per kg body weight or same volume of marine fish Ringer's solution. In the first experiment, milt volume was increased in male implanted with $200{\mu}g$ LHRHa pellet compared with other groups at day 10. Injection of 400 and 800 IU hCG resulted in an increase in the milt volume at hour 96 after the treatment. Although statistical difference is unable to confirm because of small milt volume, compared with the control group, hormone pellet-treated groups had a reduction in the mean spermatocrit (Sct) and sperm concentration (Sc). The results suggest that the increase in milt volume is at least partially gonadotropin (GtH)-dependent and increased milt volume has a relationship with milt hydration.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.250-258
• /
• 2000

The reinforcing effects of ductile short-fiber reinforced brittle matrix composites are studied by, measuring flexural strength, fracture toughness and impact energy as functions of fiber volume fraction and length. The parameters of fracture mechanics, K and J are applied to assess fracture toughness and bridging stress. It is found that fracture toughness is greatly, influenced by the bridging stress ill which fiber pull-out is occur. For the reinforcing effects as functions of fiber volume fraction($V_f$ = 1, 2, 3 %) and length(L = 3, 6. 10cm), the flexural strength is maximum at $V_f$ = 1% and both fracture toughness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.424-426
• /
• 2002

The surface and volume resistivity in the polymers, PE(polyethylene) and PP(polypropylene) mixtures are tested and measured by the ASTM D257(KS M3015) standard. Humidity effects on surface and volume resistivity in two polymers have been studied qualitatively at room temperature. The results of resistivity in these polymers show that the values of surface resistivity (and volume resistivity) at the humidity of 90% are remarkably small compared with those at the humidity of 50%, independing on applied voltage. When we varied the humidity in two polymers, it was found to takes many hours to recover into original surface resistivity (and volume resistivity) of these polymers.

• Computers and Concrete
• /
• 제4권2호
• /
• pp.157-166
• /
• 2007

The paper considers a theoretical model to study sulfate ion diffusion in saturated porous media - cement based mineral composites, accounting for simultaneous effects, such as filling micro-capillaries (pores) with ions and chemical products and liquid push out of them. Pore volume change and its effect on the distribution of ion concentration within the specimen are investigated. Relations for the distribution of the capillary relative radius and volume within the composite under consideration are found. The numerical algorithm used is further completed to consider capillary size change and the effects accompanying sulfate ion diffusion. Ion distribution within the cross section and volume of specimens fabricated from mineral composites is numerically studied, accounting for the change of material capillary size and volume. Characteristic cases of 2D and 3D diffusion are analyzed. The results found can be used to both assess the sulfate corrosion in saturated systems and predict changes occurring in the pore structure of the composite as a result of sulfate ion diffusion.

• Journal of Welding and Joining
• /
• 제15권3호
• /
• pp.47-55
• /
• 1997

Dynamic characteristics of the short circuit mode are investigated using the Volume of Fluid (VOF) method. When the initial molten drop volume, contact area and wire feed rate are given, rate change of the molten bridge profiles, pressure and velocity distributions are predicted. The electromagnetic force with proper boundary conditions are included in the formulation to consider the effects of welding current. It is found that the molten metal is transferred to the weld pool mainly due to the pressure difference caused by the curvatures in the initial stage, and electromagnetic force becomes dominant factor in the final stage of short circuit transfer. Necking occurs at the contact position between the molten drop and weld pool, and the initial molten drop volume and welding current have significant effects on break-up time.

• 한국환경보건학회지
• /
• 제28권2호
• /
• pp.141-148
• /
• 2002

This study was performed to examine the effects of rice straw as bulking materials on temperature, pH, weight and volume reduction, porosity, C/N ratio, salinity, and conductivity in aerobic composting of food wastes. Volume ratios of food wastes to rice straw in reactor control, RS-1, RS-2, RS-2 and RS-4 were 4:0, 4:1. 4:2. 4:3 and 4:4, respectively. Reactors were operated for 24days with 1 hour stirring by lrpm and 2hours aeration per day. The values of pH of food wastes and rice straw were 4.39 and 7.4, respectively. The lowering of the volume ratio of food wastes to rice straw resulted in the high reaction temperature and the fast weight and volume reduction rates. C/N ratio in control was larger than that in rice straw containing reactors. Salinity and conductivity in reactors were condensed and increased by reaction days.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.389-397
• /
• 1999

Recently the use of Pd catalyst have been continued to expand because of cost avaliabilityand performance advantages. Especially the Pd+Rh catalyst instead of the Pt+Rh catalyst had been used for most of three way catalysts because of the more stringent emission standards and its higher temperature effectiveness. The main purpose of this study is to investigate the design parameter impacts on the Pd+Rh cat-alyst for the automotive exhaust catalysts application. This study was investigated on the catalyst efficiency for the volume and the precious metal loading of the Pd+Rh ceramic monolithic cata-lyst. And experiments concerning the effects of volume and precious metal loading on Pd+Rh three way catalysts were conducted to examined the catalyst light-off temperature and conver-sion efficiency on higher volume demonstrated almost similar performance. But their effects on higher precious metal loading demonstrated considerably better performance.

• 중환자간호학회지
• /
• 제2권1호
• /
• pp.15-25
• /
• 2009

Purpose: This study investigated the effects of chest physiotherapies on intensive care unit patients mechanical ventilated. Methods: Good lung down position, chest percussion, postural drainage was applied to patients who admitted to ICU. Each patients divided into four groups and each group received different treatments. Sputum amount, lung compliance, tidal volume and oxygen saturation were measured before treatment and immediately, and time flowing. Data was analyzed with frequency, percentage, ANOVA and paired t-test using via SPSSWIN 12.0 program. Results: There were significant differences in variables each characteristics of subjects. Chest percussion increased tidal volume, static lung compliance for the mean time. Desaturation related to suction. Conclusion: Chest percussion influences on lung compliance. Based on this study results and limitation, this study suggests repeated studies in various groups