• 한국농공학회지
• /
• 제25권4호
• /
• pp.29-37
• /
• 1983

This study was carried out not only to prepare available materials that can be utilized in basic planning of irrigation reservoirs, but also to contribute to the study on countermeasures for reasonable irrigation water development in Korea in the future, through the investigation for the structural characteristics of reservoirs and their change trend by an epoch. During this study 123 sites of sample reservoirs were analysed in their dimensions of physical constituent factors. The physical characteristics and their change trends revealed by this study are summarized as follows: 1. For the irrigation earth dam in Korea the correlation between dam volume (v) and dam height & length (H$^2$L) can be described as the formula of v=1. 434H2L~17, 300 (r=0. 933), from which embankment amount is assumed to be quickly estimated under determined dam height and length of the proposed reservoir. 2. The ratio of dam volume to dam height & length ranges approximately from 0.5 to 3 (1.7 in average), that of storage capacity to dam volume 2 to 10 (8.4 in average), that of irrigation area to full water surface area 5 to 20 (13 in average) and that of catchment area to irrigation area 2 to 5 (4 in average). Though correlation between dam volume and dam height & length is high, that between others is relatively low. 3. Average storage depth ranges approximately from 4m to l0m (6.6m in average), unit storage capacity 0. 4m to 0. 8m (0.54 in average) and shape factor of dam 5 to 20 (10.5 in average). 4. The more recently planned the reservoirs were, the less storage capacity, dam volume, full water surface and dam shape factor they have. 5. The more recently planned the reservoirs were, the larger storage depth and unit storage capacity they have.

• 대한교통학회지
• /
• 제30권3호
• /
• pp.31-41
• /
• 2012

VMS, 교통방송(라디오), SNS 등 교통정보제공을 통한 교통량 분산에 대한 관심이 높아짐에 따라 교통정보에 대한 운전자의 반응행태 및 효과에 대한 연구가 지속적으로 이루어지고 있다. 본 연구는 FTMS 및 TCS 데이터가 구축되어 있는 전국 고속도로 본선부를 분석 대상으로, FTMS 데이터와 TCS 데이터를 이용하여 경로전환 교통량과 그에 따른 경로전환율을 추정하는 방법론을 제시하고, 실제 대상구간의 경로전환율을 산출하여 시간 및 공간적 경로 전환율 변동에 대한 특성을 분석하였다. 본 연구에서는 교통정보 제공 이후, 해당 시간대의 평균 유출교통량에 비해 유출교통량이 일시적으로 증가한 경우 이 편차(도로교통상황의 동적인 특성으로 인한 편차 고려)는 교통정보 제공으로 인한 경로전환 교통량이라 정의하고, 본선 교통량과의 비율을 경로전환율로 계산하였다. 시간흐름에 따른 경로전환율 변화를 분석한 결과, 혼잡상황에 대한 교통정보를 먼저 얻게 되는 상류부 IC에서의 초기 경로전환율(유출교통량) 변화는 일시적으로 매우 큰 것으로 나타났다. 이후 공간적 시간적 흐름에 따라 상류부 IC에서의 경로전환율의 변화는 하류부 IC에서의 경로전환에 영향을 미치고, 이는 다시 상류부 IC에서의 변화를 유도하는 등의 경로전환 순환체계(feedback control loop)가 있음을 확인하였다.

• 대한화학회지
• /
• 제54권5호
• /
• pp.594-602
• /
• 2010

반도체의 경박단소화, 고밀도화에 따라 향후 반도체 패키지의 주 형태는 CSP(Chip Scale Package)가 될 것이다. 이러한 CSP에 사용되는 에폭시 수지 시스템의 흡습특성을 조사하기 위하여 에폭시 수지 및 충전재 변화에 따른 확산계수와 흡습율 변화를 조사하였다. 본 연구에 사용된 에폭시 수지로는 RE-304S, RE-310S, 및 HP-4032D를, 경화제로는 Kayahard MCD를, 경화촉매로는 2-methyl imidazole을 사용하였다. 충전재 크기 변화에 따른 에폭시 수지 성형물의 흡습특성을 조사하기 위하여 충전재로는 마이크로 크기 수준 및 나노 크기 수준의 구형 용융 실리카를 사용하였다. 이러한 에폭시 수지 성형물의 유리전이온도는 시차주사열량계를 이용하여 측정하였으며, 시간에 따른 흡습특성은 $85^{\circ}C$ and 85% 상대습도 조건하에서 항온항습기를 사용하여 측정하였다. 에폭시 수지 성형물의 확산계수는 Ficks의 법칙에 기초한 변형된 Crank 방정식을 사용하여 계산 하였다. 충전재를 사용하지 않은 에폭시 수지 시스템의 경우, 유리전이온도가 증가함에 따라 확산계수와 포화흡습율이 증가 하였으며 이는 유리전이온도 증가에 따른 에폭시 수지 성형물의 자유부피 증가로 설명하였다. 충전재를 사용한 경우, 충전재의 함량 증가에 따라 유리전이온도와 포화흡습율은 거의 변화가 없었으나, 확산계수는 충전재의 입자 크기에 따라 많은 변화를 보여주었다. 마이크로 크기 수준의 충전재를 사용한 경우 확산은 자유부피를 통하여 주로 이루어지나, 나노 크기 수준의 충전재를 사용한 에폭시 수지 성형물에서는 충전재의 표면적 증가에 따른, 수분 흡착의 상호작용을 통한 확산이 지배적으로 이루어진다고 판단된다.

• 한국방재학회 논문집
• /
• 제10권4호
• /
• pp.89-93
• /
• 2010

유역의 급격한 도시화는 지체시간, 첨두유량 및 총 유출량 등 홍수 유출특성 뿐만 아니라 개발행위에 따른 토사유출특성 변화를 초래하여 배수관로내의 토사퇴적을 유발하여 도시홍수 발생 가능성 등 다양한 문제를 유발하고 있다. 본 연구에서는 도시화가 진행 중인 시험유역을 선정하여 지난 3년 동안 토지이용분포의 변화양상은 물론 강우 및 수위 자동계측기를 이용하여 연속적으로 유출수문 특성을 계측하였으며 유량-유사량 관계곡선을 유도하였다. 실측결과로부터 호우사상별 토지이용분포 변화에 따른 유출률과 첨두유출량의 변화를 정량적으로 분석하였으며 유역개발 건설과정에 따른 토사유출량의 변화특성을 정성적으로 분석하였다. 도시화가 진행될수록 합리식의 유출계수는 증가하였다. 토사의 경우 공사기간 중 유출량의 변화가 심하다는 사실과 특히, 공사기간 중 1 cms 미만의 유출을 유발하는 소규모 강우에 의한 부유사 유출은 약 10배 이상 증가한다는 사실을 확인하였다. 그러나 소류사의 경우 강우의 크기에 민감하지 않음을 확인할 수 있었다.

• 동력기계공학회지
• /
• 제20권6호
• /
• pp.87-92
• /
• 2016

This research dealt with performance characteristics of OTEC system applying an ejector and additional pump. Each system using five kinds of working fluids was analyzed, and primary parameters with respect to entrainment ratio were examined: Turbine gross power, evaporation capacity, pump work, efficiency and volume flow ratio. The primary results were as following. The efficiency of ejector-pump OTEC system was dependent on entrainment of the ejector. The degree of efficiency change was different from applied working fluid, and amount of pump work was turned out to be primary factor affected system efficiency. Meanwhile, optimized entrainment ratio was different from applied working fluid since their different vapor density. System efficiency at optimized entrainmet ratio of each working fluid was around 5%, showing minor difference each other.

• Journal of Multimedia Information System
• /
• 제8권2호
• /
• pp.93-100
• /
• 2021

Under the time-varying temperature, the high-temperature radiation of forgings and the change of reflection characteristics of oxide skin on the surface of forgings lead to the difficulty of obtaining images to truly reflect the geometric characteristics of forgings. It is urgent to study the clear and reliable acquisition method of hot forging feature image under time-varying temperature to meet the requirements of visual measurement of hot geometric parameters of forgings. Based on this, this chapter first puts forward the quality evaluation method of forging feature image, which provides guarantee for the accurate evaluation of feature image quality. Furthermore, the factors that affect the image quality, such as the radiation characteristics of forgings and the photographic characteristics of cameras, are analyzed, and the imaging spectrum which can effectively suppress the radiation intensity of forgings is determined. Finally, aiming at the problem that the quality of image acquisition is difficult to guarantee due to the drastic change of radiation intensity of forgings under time-varying temperature, an image acquisition method based on minimum signal-to-noise ratio (SNR) based laser light intensity adaptation is proposed, which significantly improves the definition of feature light strips in forging images at high temperature, and finally realizes the clear acquisition of feature images of large-scale hot forging under time-varying temperature.

• 한국식품영양과학회지
• /
• 제28권2호
• /
• pp.429-437
• /
• 1999

A mathematical model was established for estimating changes in pressure and volume of permeable kimchi packages. The model comprises the CO2 gas production from kimchi and permeation of O2, CO2 and N2 through the permeable film or sheet. Using the developed model, the effects of various packaging variables on the pressure and volume changes were analyzed for rigid and flexible packag es of kimchi(3% salt content) at 15oC, and then effect of storage temperature was also looked into. In case of rigid pack of 400g, using the plastic sheet of high CO2 permeability and initial vacuumizing can help to relieve the problem of pressure build up. The lower fill weight can further reduce the pressure, but will result in higher packaging cost. For the flexible package of 3 kg, highly permeable films such as low density polyethylene(LDPE) and polypropylene can reduce the volume expansion. Higher ratio of CO2 permeability to O2 and N2 permeabilities are effective in reducing the volume expansion. Increased surface area cannot contribute to reduction of volume expansion for highly permeable flexible packages of kimchi. For the impermeable packages, pressure and volume at over ripening stage (acidity 1.0%) increase with decreased temperature, while those at optimum ripening stage(acidity 0.6%) change little with temperature. Pressure of permeable rigid LDPE package increases with tem perature at any ripening stage, and temperature affects the volume of flexible LDPE package very slightly. Experimental verification of the present results and package design with economical consid eration are needed as a next step for practical application.

• 열처리공학회지
• /
• 제15권6호
• /
• pp.255-259
• /
• 2002

Effect of martensite on the mechanical properties of austempered ductile cast iron was investigated after obtained the martensite by subzero treatment. Retained austenite was transformed to martensite by subzero treatment, and with decreasing subzero treatment temperature, volume fraction of martensite was increased. With increasing of the volume fraction of martensite, tensile strength was increased and elongation was decreased, ratio of increasing of strength and decreasing of elongation was higher in case of specimens with lot's of Cu contents. With increasing of the volume fraction of martensite, hardness slowly increased until only about 5% and it rapidly increased in a straight proportion when it is above 5%, while impact value was rapidly decreased until about 7% but it had a little change when it is above 7%.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1115-1122
• /
• 1993

Several yield criteria for porous materials are compared with each other, defining the apparent yield stress as the yield stress of the porous material in simple compression. It was found that the plastic Poisson's ratio is the parameter needed to define the yield criterion, rather than the relative density. The plastic Poisson's ratio is regarded as a material characteristic that is obtained from a simple compression test. A new form of yield criterion was suggested, and it was applied to hydrostatic compression as well as uniaxial strain compression of sintered Al-2024 powder. The crossover point in the mean stress vs volume change curves of the processes was predicted. It is presented that the flow stress of the fully densed material can be obtained from that of the porous material using relations obtained from the yield criterion.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.481-484
• /
• 2003

This study is intended to investigate application of mica waste(MS) to fine aggregate for mortar by comparing it with cement mortar in which crushed sand(CS) and river sand(NS) are used. According to the results, as the physical properties of aggregate, specific gravity is large in order of MS, NS and CS, absorption ratio in order of MS, CS and NS, and unit weight and solid volume percentage in order of NS, CS and MS. In the case of MS mortar, mechanical properties, drying shrinkage and heat conduction ratio are reduced, but the radiative amount of infrared light is excellent compared with NS mortar. Fluidity and unit weight of MS mortar is larger than those of CS mortar, and strength does not make differences. Length change by drying shrinkage is larger, but heat conduction ratio and radiative amount of infrared light are smaller than CS mortar. Thus, it proves that MS can be used in place of NS and CS, but its quality is deteriorated slightly.