• 천문학회보
• /
• 제45권1호
• /
• pp.48.2-48.2
• /
• 2020

We present a new void definition that connects voids with clusters, the high-density counterpart. We use a pair of ΛCDM simulations whose initial density fields are sign inverted versions to each other, and study the relation between the effective void volume and the corresponding cluster mass. Massive cluster halos (M ≥ 1013M⊙/h) are identified in one simulation at z=0 by linking dark matter particles. The corresponding void to each cluster is defined in the other simulation as the region occupied by the member particles of the cluster. We find a universal functional form of density profiles at z=0 and 1. We also find a power-law relation between the void effective radius and the corresponding cluster mass. Based on these findings, we identify cluster-counterpart voids directly from a density field without using the pair information by utilizing three parameters such as the smoothing scale, density threshold, and minimum core fraction. We identified voids corresponding to clusters more massive than M ≥ 3 × 1014M⊙/h at approximately 70-74 \% level of completeness and reliability. Our results suggest that we can detect voids comparable to clusters of a particular mass-scale.

• 설비공학논문집
• /
• 제22권10호
• /
• pp.710-718
• /
• 2010

A numerical study was performed to predict refrigerant charge amount in a mini-channel condenser for a R410A residential air-conditioning system. Multi-channel flat tubes with 12 mini-channels of 1.17 mm average hydraulic diameter for each tube were applied to the condenser. The condenser consisted of 3 passes, and the first, second, and third pass had 44, 19, and 11 tubes, respectively. Each pass was connected by a vertical header. In this study, the condenser was divided into 410 finite volumes, and analyzed by an $\varepsilon$-NTU method. With thermophysical properties and void fraction models for each volume element, the R410A amount distribution and a total charge amount in the condenser were calculated. The predicted total charge amount was compared with the experimentally measured charge amount under a standard ARI A condition. The developed model could predict the charge amount in the mini-channel condenser within prediction errors from -23.9% to -3.0%. Air velocity distribution at the condenser face was considered as non-uniform and uniform by the simulation model, and its results showed that the air velocity distribution could significantly influence the charge amount and vapor phase distribution in the condenser.

• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1877-1889
• /
• 1992

본 연구에서는 업셋팅의 변형해석 및 온도해석(열전달 해석)을 비연계 방식으 로 동시에 해석하고 실제 공정에 가깝게 접근하는 축대칭 열점소성 유한요소 프로그램 을 이용하여, 시뮬레이션에 의해 공정을 해석하여 불량감소 및 원가절감을 위해 단조 공정을 개선하는 것이다. 업셋팅공정의 연구에 있어서는 대형강괴의 주 불량요인인 기공의 소멸을 위한 공정방안을 연구하는데 있다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.79-82
• /
• 2003

In case of performing resin transfer molding (RTM), race track effects and non-uniform fiber volume fraction may cause undesirable resin flow pattern and thus result in dry spots, which affect the mechanical properties of the finished parts. In this study, a real time RTM control strategy to reduce these unfavorable effects is proposed. Through numerical simulations and experiments, the validity of the proposed scheme is demonstrated.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.217-220
• /
• 2003

The effective thermoelastic properties of porous metals are discussed herein after each material forming process such as hot pressing or extrusion. The voids in metal matrix are assumed to be initially spherical in shape and to be distributed randomly. Once the porous material deforms plastically due to each material forming process, the voids change their shape from a sphere to an ellipsoid and align in one direction. Since the voids are compressible in nature, the void volume fraction is assumed to be decreasing during each material forming process.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.1-11
• /
• 2000

The influence of the first coating layer on the properties of the second coating layer is reported. For various model coating composition, ratios of first and second coating weights are used to generate coating layers. The void volume, pore size distribution and light scatter coefficient of the coatings are measured. In some cases, the fine material from the second layer seems to penetrate the first layer to reduce the void fraction of the total system. Rapid setting coating, for example thin layers on porous first layer tends to generate porous coating layers.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권3호
• /
• pp.351-357
• /
• 2001

The rapid formation of a cream line cannot be observed in raw goat's milk standing at a low temperature. Although the poor creaming ability of goat's milk has been considered to be due to the small size of milk fat globules and the lack of euglobulin capable of being adsorbed on milk fat globules, there is much left to study. The present work attempted to elucidate a factor for poor creaming ability of goat's milk. The creaming ability of the experimental milks reconstituted from creams and skim milks separated from cow's milk or goat's milk was measured by the volume of the cream layer and the fat content of bottom layer. The polypeptides composition of the P1 the fraction (i.e., the high molecular weight fraction eluted near the void volume obtained by the gel filtration of whey) and milk fat globule membrane prepared from both milks were compared. It was found that the promotion of creaming originated from goat's skim milk was lower than that from cow's skim milk. The P1 fraction in goat's skim milk was less than that in cow's skim milk. The polypeptide (M.W. $4.3{\times}10^4$), found in the P1 fraction of cow's milk was not found in the P1 fraction of goat's milk. It is suggested that the poor creaming ability of goat milk is caused mainly by the difference from cow milk in the amount and the composition of the P1 fraction.

• Korea-Australia Rheology Journal
• /
• 제21권1호
• /
• pp.71-79
• /
• 2009

The incomplete saturation and the void formation during the resin infiltration into fibrous porous media in the resin transfer molding process cause failure in the final product during its service. In order to better understand flow behavior during the filling process, a finite-element scheme for transient flow simulation across the micro-structured fibrous media is developed in the present work. A volume-of- fluid (VOF) method has been incorporated in the Eulerian frame to capture the evolution of flow front and the vertical periodic boundary condition has been combined to avoid unwanted wall effect. In the microscale simulation, we investigated the transient filling process in various fiber structures and discussed the mechanism leading to the flow fingering in the case of random fiber distribution. Effects of the filling pressure, the shear-thinning behavior of fluid and the volume fraction on the flow front have been investigated for both intra-tow and the inter-tow flows in dual-scale fiber tow models.

• 소성∙가공
• /
• 제21권5호
• /
• pp.285-290
• /
• 2012

In spite of progress in predicting ductile failure, the development of a macroscopic yield criterion to describe damage evolution in HCP (hexagonal close-packed) materials remains a challenge. HCP materials display strength differential effects (i.e., different behavior in tension versus compression) in their plastic response due to twinning. Cazacu and Stewart(2009) developed an analytical yield criterion for porous material containing randomly distributed spherical voids in an isotropic, incompressible matrix that shows tension-compression asymmetry. The goal of the calculations in this paper is to investigate the effect of the tension-compression asymmetry on necking induced by void nucleation, evolution and consolidation. In order to investigate the effect of the tension-compression asymmetry of the matrix on necking and fracture initiation, three isotropic materials A, B, and C were examined with different ratios of tension-compression asymmetry. The various types of material had BCC, FCC, and HCP crystal structures, respectively. The ratio between tension and compression in plastic flow significantly influences the fracture shape produced by damage propagation as well as affecting the localized neck.

• 상하수도학회지
• /
• 제10권1호
• /
• pp.112-120
• /
• 1996

In this study, the porous glass media was utilized as biomass carrier, and the optimum characteristics of this new media in fixed bed biofilm process were investigated. The characteristics of media considered here are a void volume fraction, a specific surface area, and surface characteristics of media. The effect of surface roughness and material could be clearly demonstrated by the fact that the porous glass media showed a good potential for biofilm development. This might results from the fact that biofilm is initially formed in the surface cavities of the media is protect from the shear effect. Therefore, the microcolonies are not readily detached by the fluid shear. In the steady state, biofilm formation along the packing bed depth was different from media to media. The specific area was also an important factor for the attachment of microorganism on the media surface. The specific area was also an important factor for the attachment of microorganism on the media surface. In the case of porous glass media, about $100m^2/m^3$ was enough to obtain a good organic removal efficiency The organic removal efficiency could be improved by increasing the void volume fraction in the reactor, at least 80% was required to obtain a high removal efficiency and prevent clogging. From the analysis of kinetics study, the yield coefficient, Y, was 0.42 mgMLSS/mgSBOD, endogenous respiration coefficient, ke, was $0.12day^{-1}$ and substrate removel coefficient of Mckinney. km, was $16.8hr^{-1}$ for the porous glass media G-2