• 소음진동
• /
• 제10권4호
• /
• pp.669-678
• /
• 2000

This paper reviews the improved moving frame acoustic holography (MFAH) method and its application. Moving frame acoustic holography was originally proposed to increase the aperture size and the spatial resolution of hologram by using a moving line array of microphones. The hologram of scanned plane can be obtained by assuming the sound field to be product of spatial and temporal information. Although conventional MFAH was only applied to sinusoidal signals, it allows us to visualize the noise generated by moving noise sources by employing a vertical line array of microphones affixed to the ground. However, the sound field generated by moving sources becomes different from that of stationary ones due to the movement of the sources. Firstly, this paper introduces the effect of moving noise sources on the obtained hologram by MFAH and the applicability of MFAH to the visualization of moving sources. Secondly, this paper also reviews improved MFAH that can visualize a coherent narrow band noise and a pass-by noise. The practical applicability of the improved MFAH was demonstrated by visualizing tire noise during a pass-by test.

• 한국항해항만학회지
• /
• 제28권1호
• /
• pp.17-22
• /
• 2004

이 논문에서는 해양사고 통계예측 결과의 의미를 쉽게 이해할 수 있는 3차원 가시화 시스템의 구현에 관해서 기술했다. 이 시스템 개발에는 그래픽 사용자 인터페이스 방식(GUI)과 웹(Web) 기반 가상현실(VR) 기술을 주로 적용하였다. 그리고, 매일의 상황을 예보하기 위하여 시간기반 해양사고 예측모델과 위험수준 지표를 개발하였다. 시스템 작동실험 결과, 3차원 가상공간에 단순한 색으로 복잡한 통계결과를 나타낼 수 있었다. 또한, 매일의 위험수준을 막대 그래프에 나타낼 수 있었다.

• 한국가시화정보학회지
• /
• 제9권3호
• /
• pp.59-64
• /
• 2011

In this study the change of free surface vortex is expressed through the time volume fraction using multiphase unsteady condition in sump, because in previous studies of the pump sump did not represent the behavior of the free surface vortex exactly due to the reason it was calculated using single phase and steady condition. The reliability of the computational analysis is verified through comparing experimental results with that of present numerical analysis. Homogeneous free surface model is used to apply interactions of air and water. The results show that the free surface vortex can be identified on the isotropic surface at air volume fraction 1%~5%. The vortices make an air column from the free surface to the sump intake and are created and destroyed repeatedly. The behavior of free surface vortex at numerical analysis is quite similar to experimental test. The result of vortex motion according to time, works on a cycle.

• 한국가시화정보학회지
• /
• 제8권1호
• /
• pp.39-45
• /
• 2010

The optimal design is needed for the blade geometry of the quad-rotor blades which is mainly used for Unmanned Aerial Vehicle. To do this, it is important to analyze the wakes under the blades. In the present study, the flow around the rotating blades was analyzed using PIV(Particle Image Velocimetry) and CFD(Computational Fluid Dynamics). The maximum axial velocity was measured at about 60% position toward the radial direction of the blade. The positions of vorticities in the test section obtained by PIV and CFD were turned out to be almost alike. The values in the difference of pressure coefficients at the upper and the lower blades were increased depending on the radial direction. Then, the values were decreased at the blade tip. The data of the flow analysis in the present study are expected to be served as the design of blades and ducts for the thrust improvement in the future.

• 한국CDE학회논문집
• /
• 제8권2호
• /
• pp.65-74
• /
• 2003

For virtual reality, virtual manufacturing system, or simulation based design, we need to visualize very large and complex 3D models which are comprising of very large number of polygons. To overcome the limited hardware performance and to attain smooth realtime visualization, there have been many researches about algorithms which reduce the number of polygons to be processed by graphics hardware. One of these algorithms, occlusion culling is a method of rejecting the objects which are not visible because they are occluded by other objects, and then passing only the visible objects to graphics hardware. Existing occlusion culling algorithms have some shortcomings such as the required long preprocessing time, the limitation of occluder shape, or the need for special hardware implementation. In this study, an efficient occlusion culling algorithm is proposed. The proposed algorithm reads and analyzes Z-buffer of graphics hardware using Microsoft DirectX, and then determines each object's visibility. This proposed algorithm can speed up visualization by reading Z-buffer using DirectX which can access hardware directly compared to OpenGL, by reading only the region to which each object is projected instead of reading the whole Z-Buffer, and the proposed algorithm can perform more exact visibility test by using simplified model instead of using bounding box. For evaluation, the proposed algorithm was applied to very large polygonal models. And smooth realtime visualization was attained.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.66-72
• /
• 2003

이 논문에서는 해양사고 통계예측 결과의 의미를 쉽게 알 수 있도록 가시화하기 위한 3차원 가시화 시스템의 구현에 관해서 기술했다. 이 시스템 개발에는 그래픽 사용자 인터페이스 방식(GUI)과 웹(Web) 기반 가상현실(VR) 기술을 주로 적용하였다. 그리고, 매일의 상황을 나타내기 위하여 해양사고와 위험수준의 시간기반 예측 모델을 개발하였다. 시스템 작동실험 결과, 3차원 가상공간에 단순한 색으로 복잡한 통계결과를 나타낼 수 있었다.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.382-394
• /
• 1988

Dynamic characteristics of thermally-forced stratification process in a square enclosure with a linear temperature profile at the side walls have been investigated through flow visualization experiment and numerical analysis. The experiment was performed on air with the Rayleigh numbers of order $10^5$. A particle tracer method is used for the flow visualization and to obtain a sudden linear temperature profile at the side walls copper blocks which already have a linear temperature profile are come into contact with the thin copper plates of the test section. Immediately a meridional circulation is developed and heat transfer takes place from the wall to the interior region by circulation of fluid and finally a thermal stratification is achieved. In the numerical study, QUICK scheme for convective terms, SIMPLE algorithm for pressure correction, and the implicit method for the time marching are adopted for the integration of conservation equations. Comparison of flow visualization and numerical results shows that the developing flow patterns are very similar in dynamic nature even though there is a time lag due to the inevitable time delay in setting up a linear temperature profile. For high Rayleigh numbers, the oscillatory motion is likely to take place and stratified region is extended. However, initial temperature adjustment process is much slower than that for low Rayleigh numbers.

• 한국가시화정보학회지
• /
• 제21권1호
• /
• pp.103-109
• /
• 2023

This research developed a measurement technique that can measure the oxygen temperature inside a high temperature furnace. Instead of measuring only changes in frequency components within a small range used in the existing variable laser absorption spectroscopy, laser spectroscopy technology was used to spread out wavelength of the light source passing through the gas Based on a total of 20,000 image data, research was conducted to predict the temperature of a high-temperature furnace using CNN with black and white images in the form of spectral bands by temperature of 25 to 800 degrees. The optimal model was found through Hyper parameter optimization, R2 score is 0.89, and the accuracy of the test data is 88.73%. Based on this research, it is expected that concentration measurement and air-fuel ratio control technology can be applied.

• 한국정보전자통신기술학회논문지
• /
• 제11권3호
• /
• pp.215-220
• /
• 2018

중견/중소 IT기업의 사업 수행 기회 증대, 기회 균등과 역량 강화라는 취지로 소프트웨어(SW)산업진흥법 개정으로 공공정보화시장에 대기업 참여를 제한되었다. 이러한 환경에서의 중견/중소 SW기업들의 사업을 수행하면서 발생한 사업 수행 역량 미흡으로 공공정보화사업의 품질저하, 위험관리 미숙, 일정관리 저하 등 여러 문제점을 발생시키고 있다. 이를 해결하기 위해 본 논문은 시스템통합 사업 수행 시 품질 저하 요인을 도출하였으며, 이를 해결하기 위한 방안으로 VISUALIZATION, 엄격한 시험관리, Agile방법론의 일부 활동을 적용하여 프로젝트를 수행하는 것을 제안했다. 이러한 방안을 중견/중소 IT기업이 개발한 보건의료 IT 프로젝트에 적용한 결과 의사소통의 개선, 수치화된 진척관리 및 프로젝트의 가시성이 개선되었다. 또한, 결함 해결시간 최소화, 요구사항 커리리지 비율 개선, 불필요한 회의시간이 단축이 되어 품질 향상에 기여하였습니다.

• 대한치과의사협회지
• /
• 제56권9호
• /
• pp.462-478
• /
• 2018

임플란트와 지대주 간에 허용가능한 적합도를 넘는 부적합을 발견하고 이에 대처하는 것은 중요한 과제이다. 부적합을 임상에서 평가하고 발견하는 방법은 대부분 부적합의 정성적 평가에 치중하고 있으며 술자의 숙련도에 의존하고 있어 정확한 평가방법이라고 하기는 어렵다. 부적합의 정도를 판단하고 원인을 실험적으로 분석하는 방법 중 본 문헌고찰에서는 광탄성 분석법, 유한요소분석법, 스트레인게이지, 미생물 균체 분석 등 조건을 모형화하여 분석하는 모형화법과 사진 측량, 삼차원 좌표 측정, 현미경분석 및 방사선분석을 통해 부적합의 정도를 정밀하게 측정하는 수치법을 각각 설명하고 그 장단점 및 적용의 한계를 분석하였다. 지금까지 살펴본 실험실 부적합 평가 방법들을 장, 단점 및 정확도와 재현성을 기준으로 표로 정리한 것이 Table 3이다. 어떤 방법도 모든 경우에 적용할 수 있을 정도로 완벽하지는 않으므로 평가하고자 하는 부적합의 특성에 따라 적절한 평가방법을 선택하여 적용하는 것이 필요하다고 사료된다.