• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.1-6
• /
• 2017

Visual evaluation of chest radiograph images is the most practical and effective method. This study compared the Body Mass Index, waist circumference, and mAs with chest radiographs of 351 women. The Bureau of Radiological Health method was used to evaluate the image quality of chest X-ray images by anatomical and physical methods. The average age of the subjects was $30.17{\pm}4.73$ and the average waist circumference was $66.91{\pm}4.67cm$. The mean Body Mass Index value was $20.21{\pm}2.23$, the mean value of mAs was $3.04{\pm}0.78$, and the mean value of Bureau of Radiological Health was $79.83{\pm}8.45$. When the Body Mass Index value increased, waist circumference and mAs mean value increased. The mean value of Body Mass Index was statistically significant(p<0.05) in Group 4 compared to Groups 1 and 2, with increasing Body Mass Index. Exposure control of the automatic exposure control system is considered to be well performed according to body thickness or Body Mass Index at the time of chest radiography. As the Body Mass Index increases, the thickness of the body increases and the breast thickness of the woman also increases. Therefore, it is considered that the exposure amount is changed by the automatic exposure control device to affect the image quality.

• The Korean Journal of Nuclear Medicine
• /
• v.31 no.1
• /
• pp.43-49
• /
• 1997

We studied to investigate the predictive values of gated SPECT for the improvement of wall motion after bypass surgery. As we compared postoperative SPECT with preoperative ones, we defined viability as wall motion improvement. We peformed rest T1-201/s1ress Tc-99m-MIBI gated SPECT in 25 patients before and 3 months after bypass surgery. Myocardial wall motion was graded as normal, hypokinesia, akinesia, and dyskinesia by pair-wise visual analysis of gated pre and postoperative SPECT's on the same monitor screen. Myocardial wall thickening was determined good or poor Among 92 segments with wall motion abnormalities before operation, 69 (75%) improved and 23 did not. Before operation, we could find segments with good systolic thickening in 64 segments among total 92. Thickening of the remaining 28 was poor. Wall motion improved postoperatively in 45 segments (70%) among 64 with good thickening. Twenty four(86%) among 28 segments with poor thickening had also improved. We grouped segments into mild(hypokinetic) and severe(akinetic/dyskinetic) ones. Among 33 segments with severe motion abnormalities, 14 had good thickening and 19 did not. Nine(60%) improved out of 14 segments having severe abnormality with good thickening However, 16(84%) segments out of 19 haying severe abnormality with poor thickening also improved. Neither degree of perfusion decrease nor severity of wall motion abnormalities could explain the high rate of false negatives. In conclusion, as we defined viability as wall motion improvement by comparing pre and postoperative SPECT, systolic thickening observed by gated Tc-99m-MIBI SPECT in myocardial segments with wall motion abnormalities predicted wall motion improvement after bypass surgery. However, poor thickening could not be referred as evidence of nonviable myocardium both in mild and severe contractile dysfunction, so that we might need stimulation study such as dobutamine echocardiography or dobutamine gated SPECT.

• Journal of the Korean Society for Library and Information Science
• /
• v.11
• /
• pp.3-42
• /
• 1984

This is to establish a model of the standardization of shelving, chairs, tables and card cabinets for college and university libraries in Korea. The size of furniture was measured on the base of the analysis of the human factors, such as the standard size of human bodies of the college students in Korea, the scope of work area, the moving degree of muscles, the limit of the visual field, etc. The results of this study are as follows: 1. It is desirable that the standard shelf length should be 800mm. and the maximum . shelving height should not exceed 1,803mm. And it is desirable that the bottom shelf has a ground clearance of about $210\~390mm$. 2. It is advisable that the sloped shelving has the slope from about 1,000mm, or 930mm, and the gradient should be $19^{\circ}$ from the above mentioned sloping position and the bottom of each shelf. And it is desirable that the slope height of each shelf should be 77mm. 3. It is advisable that the seat area for users should be $410\~420\times420mm$, and the seat height should be $390\~0400mm$. 4. It is desirable that the table size per user should exceed $490\times880\~890mm$, and the table height should be $680\~690mm$. 5. It is advisable that each tray of the card cabinet should hold about 740 cards, and the depth should exceed 430mm. And it is desirable that the maximum height of card cabinets should be as follows: 60du(drawer units)-$1,400\~1,460mm$, 30du-1, 300mm, 15du-1,100mm. In addition, it is advisable that the 30du cabinet should accomodate 5 trays vertically and 6 trays horizontally for avoiding the worst working position rather than 6 trays vertically and 5 trays horizontally. 6. It is desirable that the height of sliding reference shelves in card cabinets, or consultation tables should be 900mm. But in the case of the sliding shelves, it is desirable to be as follows: 15du-900mm when the card cabinet height is more than 1,100, mm, but unnecessary when less than 1,100mm high, 30du-1,000mm, or 1,100mm in the case of $5\times6du$, but 900mm in the case of $6\times5du$, $60du-900\~950mm$ when the card cabinet height is $1,400\~1,460mm$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.6
• /
• pp.619-627
• /
• 2016

Cells of a PV (photovoltaic) module can suffer defects due to various causes resulting in a loss of power output. As a malfunctioning cell has a higher temperature than adjacent normal cells, it can be easily detected with a thermal infrared sensor. A conventional method of PV cell inspection is to use a hand-held infrared sensor for visual inspection. The main disadvantages of this method, when applied to a large-scale PV power plant, are that it is time-consuming and costly. This paper presents an algorithm for automatically detecting defective PV panels using images captured with a thermal imaging camera from an UAV (unmanned aerial vehicle). The proposed algorithm uses statistical analysis of thermal intensity (surface temperature) characteristics of each PV module to verify the mean intensity and standard deviation of each panel as parameters for fault diagnosis. One of the characteristics of thermal infrared imaging is that the larger the distance between sensor and target, the lower the measured temperature of the object. Consequently, a global detection rule using the mean intensity of all panels in the fault detection algorithm is not applicable. Therefore, a local detection rule was applied to automatically detect defective panels using the mean intensity and standard deviation range of each panel by array. The performance of the proposed algorithm was tested on three sample images; this verified a detection accuracy of defective panels of 97% or higher. In addition, as the proposed algorithm can adjust the range of threshold values for judging malfunction at the array level, the local detection rule is considered better suited for highly sensitive fault detection compared to a global detection rule. In this study, we used a panel area extraction method that we previously developed; fault detection accuracy would be improved if panel area extraction from images was more precise. Furthermore, the proposed algorithm contributes to the development of a maintenance and repair system for large-scale PV power plants, in combination with a geo-referencing algorithm for accurate determination of panel locations using sensor-based orientation parameters and photogrammetry from ground control points.

• International Journal of Highway Engineering
• /
• v.6 no.1 s.19
• /
• pp.1-11
• /
• 2004

This study tries to propose the most effective pavement texture method through the performance evaluation of variable texture methods. Noise 2$\sim$3dB is reduced in the section of uniform space 18m longitudinal tinning. This result is proved by comparing the magnitude of noise in two sections. The noise of 26mm longitudinal firming section is greater than that of 18mm section by 2$\sim$3dB(A). The skid resistances measured in all test section show the reasonable results. The roughness or all the test sections satisfies AASHTO roughness standard (PrI 16cm/km). The result or questionnaire survey about driving quality shows that the longitudinal tinning is the most effective method. As the result of a visual measurement, it is proved that the section applied uniform space 26mm longitudinal tinning and the general section applied uniform space 26mm transverse tinning could drain water effectively. As the result of analysis with the ranking method, the 18mm longitudinal tinning in selected as one of the most effective tinning methods. In addition, 26mm longitudinal tinning, random space transverse tinning, and transverse drag are selected in order.

• Journal of radiological science and technology
• /
• v.34 no.4
• /
• pp.297-303
• /
• 2011

The existing studies of VDT syndrome have been researched only about for nurse groups without radiological technologists. The target of this study was workers who perform VDT task in general hospital placed in Daejun City such as insurance judgement, patient affairs, medical record management, medical computing service, hospital administration, and radiological sections. This study was conducted at October 15, 2009 to November 2, 2009 using structured questionnaire. Results of group A (age 20-29, less than 5 years experience at clinical site, normal staff, and unmarried group) showed significant skin and psychological conditions among recognition symptoms of VDT syndrome. Group B (age 30-39, 6-10 years experience at clinical site, managing staff, and married group) tends to be similar at orbital, whole body and muscles' frame response among recognition symptoms of VDT syndrome. Results of "Multiple Linear Regression" with dependent variable that is scores of recognition symptoms of VDT syndrome are as follows. The factors which influences for orbital-related problem is gender, health cares and obstacles during daily life. The factors which influences for whole body-related is exercise, stress and recognition for health condition and the factors which influences muscles' frame-related is 6-10 years experience at clinical site, human relationship, health cares and obstacles during daily life. These are proved to be similar by statistic analysis. There is small difference at recognition symptom of VDT syndrome between the radiological technologist and other groups in general hospital. Yet, as the working circumstance of radiological technologist gradually changes to VDT environment, the recognition symptom of VDT syndrome became conscious. This can be prevented by regular job rotation, which will escape the continuous repetition of working pattern.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.395-408
• /
• 2015

High-resolution satellite image mosaics are becoming increasingly important in the field of remote sensing image analysis as an essential image processing to create a large image constructed from several smaller images. In this paper, we present an automatic seamline extraction technique and the procedure to generate a mosaic image by this technique. For more effective seamline extraction in the overlap region of adjacent images, an NDVI-based seamline extraction technique is developed, which takes advantage of the computational time and memory. The Normalized Difference Vegetation Index(NDVI) is an index of plant "greeness" or photosynthetic activity that is employed to extract the initial seamline. The NDVI can divide into manmade region and natural region. The cost image is obtained by the canny edge detector and the buffering technique is used to extract the ranging cost image. The seamline is extracted by applying the Dijkstra algorithm to a cost image generated through the labeling process of the extracted edge information. Histogram matching is also conducted to alleviate radiometric distortion between adjacent images acquired at different time. In the experimental results using the KOMPSAT-2/3 satellite imagery, it is confirmed that the proposed method greatly reduces the visual discontinuity caused by geometric difference of adjacent images and the computation time.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.313-326
• /
• 2018

This paper introduces core techniques on ship detection and tracking based on a compact HF radar platform which is necessary to establish a wide-area surveillance network. Currently, most HF radar sites are primarily optimized for observing sea surface radial velocities and bearings. Therefore, many ship detection systems are vulnerable to error sources such as environmental noise and clutter when they are applied to these practical surface current observation purpose systems. In addition, due to Korea's geographical features, only compact HF radars which generates non-uniform antenna response and has no information on target information are applicable. The ship detection and tracking techniques discussed in this paper considers these practical conditions and were evaluated by real data collected from the Yellow Sea, Korea. The proposed method is composed of two parts. In the first part, ship detection, a constant false alarm rate based detector was applied and was enhanced by a PCA subspace decomposition method which reduces noise. To merge multiple detections originated from a single target due to the Doppler effect during long CPIs, a clustering method was applied. Finally, data association framework eliminates false detections by considering ship maneuvering over time. According to evaluation results, it is claimed that the proposed method produces satisfactory results within certain ranges.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.331-339
• /
• 2013

LiDAR has been one of the widely used and important technologies for 3D modeling of ground surface and objects because of its ability to provide dense and accurate range measurement. The objective of this research is to develop a method for automatic detection and modeling of railroad power lines using high density LiDAR data and RANSAC algorithms. For detecting railroad power lines, multi-echoes properties of laser data and shape knowledge of railroad power lines were employed. Cuboid analysis for detecting seed line segments, tracking lines, connecting and labeling are the main processes. For modeling railroad power lines, iterative RANSAC and least square adjustment were carried out to estimate the lines parameters. The validation of the result is very challenging due to the difficulties in determining the actual references on the ground surface. Standard deviations of 8cm and 5cm for x-y and z coordinates, respectively are satisfactory outcomes. In case of completeness, the result of visual inspection shows that all the lines are detected and modeled well as compare with the original point clouds. The overall processes are fully automated and the methods manage any state of railroad wires efficiently.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.1
• /
• pp.114-121
• /
• 2013

Objectives : The purpose of the research is to measure Dental Hygiene students' level of musculoskeletal pain before and after receiving scaling training which involves repetitive operations and examine effects the operations have on the students' grip and pinch strength. Methods : 15 subjects in Dental Hygiene at Y university located in Chungbuk were tested on November 2, 2011. Results : 12 students had a musculoskeletal pain before receiving scaling training. However, all the 15 students had a musculoskeletal pain after the training. Body part the largest number of the students complained of the pain on was shoulders(37.9%) followed by neck(20.8%), waist(13.9%), wrists(10.3%), then back(6.9%) before receiving the training. Then the result showed that shoulders are where the largest number of students(24.1%) felt the pain, followed by neck(17.2%), wrists and fingers(13.8%), waist(12.1%), back and lower arms(6.9%), then palms(5.2%) after the training. Visual Analogue Scale(VAS) increased to $6.35{\pm}2.09$ after receiving the training from $3.31{\pm}3.38$ and this shows statistically significant difference(p<.001). Upon inspection, average grip strength decreased to $23.23{\pm}5.79kg$ from $25.00{\pm}4.51kg$ after receiving the training and this shows statistically significant difference(p<.05). Key pinch was the strongest among the three pinch strengths followed by tripod pinch then tip pinch. Average of all the three pinch strengths showed to have statistically significant difference before and after the training(p<.05); Tip pinch from $6.53{\pm}1.36$ to $5.87{\pm}1.3$, key pinch from $13.47{\pm}2.5$ to $12.53{\pm}2.30$, and tripod pinch from $9.27{\pm}3.04$ to $8.03{\pm}2.72$. Conclusions : The result showed that scaling training has effects on Dental Hygiene students' musculoskeletal subjective symptoms and their grip and pinch strength changes after receiving the training.