• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.75-80
• /
• 2008

This paper presents a vision based autonomous inspection system for welding quality control of a RV sinking seat. In order to overcome the precision error that arises from a visible inspection by an operator in the manufacturing process of a RV sinking seat, the machine vision based welding quality control system is proposed. It consists of the CMOS camera and the NI vision system. The geometry of the welding bead, which is the welding quality criteria, is measured by using the captured image with a median filter applied on it. The image processing software for the system was developed using the NI LabVIEW software. The proposed welding quality inspection system for RV sinking seat was verified using experimentation.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1712-1713
• /
• 2008

In this paper, we develop the vision control systems of auto tracking based on image processing techniques for video conference. The developed auto tracking vision control system consists of control hardware including vision, two dc motors and dc motor drivers. Image processing techniques are used to pixel of two images. Motion detection algorithm is applied to eliminate the noise. Experiment results are presented to illustrate the effectiveness and the applicability of the approaches proposed.

• Journal of Mechanical Science and Technology
• /
• v.14 no.7
• /
• pp.782-788
• /
• 2000

In this paper, we present a new approach to visual feedback control using image-based visual servoing with stereo vision. In order to control the position and orientation of a robot with respect to an object, a new technique is proposed using binocular stereo vision. The stereo vision enables us to calculate an exact image Jacobian not only around a desired location but also at other locations. The suggested technique can guide a robot manipulator to the desired location without providing a priori knowledge such as the relative distance to the desired location or the model of an object even when the initial positioning error is large. This paper describes a model of stereo vision and how to generate feedback commands. The performance of the proposed visual servoing system is illustrated by experimental results and compared with conventional control methods for an assembly robot.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.182-187
• /
• 2000

In this paper, we have proposed a new approach to the design of robot vision system to develop the technology for the automatic test and assembling of precision mechanical and electronic parts for the factory automation. In order to perform real time implementation of the automatic assembling tasks in the complex processes, we have developed an intelligent control algorithm based-on neural networks control theory to enhance the precise motion control. Implementing of the automatic test tasks has been performed by the real-time vision algorithm based-on TMS320C31 DSPs. It distinguishes correctly the difference between the acceptable and unacceptable defective item through pattern recognition of parts by the developed vision algorithm. Finally, the performance of proposed robot vision system has been illustrated by experiment for the similar model of fifth cell among the twelve cell for similar model of fifth cell among the twelve cell for automatic test and assemblig in S company.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.559-563
• /
• 2000

In this paper we describe a method for aligning a robot gripper using image information. The region of gripper is represented from HSI color model that has major advantage of brightness independence. In order to extract the feature points for vision based position control, we find the corners of gripper shape using polygonal approximation method which determines the segment size and curvature of each points. We apply the vision based scheme to the task of alignment of gripper to reach the desired position by 2 RGB cameras. Experiments are carried out to exhibit the effectiveness of vision based control using feature points from polygonal approximation of gripper.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.96-101
• /
• 2000

In this paper, we have proposed a new approach to the design of robot vision system to develop the technology for the automatic test and assembling of precision mechanical and electronic parts for the factory automation. In order to perform real time implementation of the automatic assembling tasks in the complex processes, we have developed an intelligent control algorithm based-on neural networks control theory to enhance the precise motion control. Implementing of the automatic test tasks has been performed by the real-time vision algorithm based-on TMS320C31 DSPs. It distinguishes correctly the difference between the acceptable and unacceptable defective item through pattern recognition of parts by the developed vision algorithm. Finally, the performance of proposed robot vision system has been illustrated by experiment for the similar model of fifth cell among the twelve cell for automatic test and assembling in S company.

• Journal of Welding and Joining
• /
• v.14 no.4
• /
• pp.79-88
• /
• 1996

For improvement in productivity and weld quality, weld seam tracking and welding parameter control are very essential in the welding of a structure which can not be cxactly fit-up due to mismatch, discontinous gap, deflection, etc.. In this study, an automatic weld seam tracking system is developed for I-butt joint structure, and the system consists of XYZ working table, vision sensor and user interface program. In the developed vision sensor system, an image projection algorithm for weld-line detection and an adaptive current control algorithm for gap variation were implemented. The user interface program developed in this study by basing on the objct oriented concept could provide very convenient way to utilize the tracking system with the pull-down menu driven structure. The developed system showed a good seam tracking and weld quality control capability corresponding to deflected weld lines and gap variations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.5
• /
• pp.480-487
• /
• 2009

Autonomous Lane detection with vision is a difficult problem because of various road conditions, such as shadowy road surface, various light conditions, and the signs on the road. In this paper we propose a robust lane detection algorithm to overcome shadowy road problem using a statistical method. The algorithm is applied to the vision-based mobile robot system and the robot followed the lane with the lane following controller. In parallel with the lane following controller, the global position of the robot is estimated by the developed localization method to specify the locations where the lane is discontinued. The results of experiments, done in the region where the GPS measurement is unreliable, show good performance to detect and to follow the lane in complex conditions with shades, water marks, and so on.

• Journal of Platform Technology
• /
• v.10 no.3
• /
• pp.21-29
• /
• 2022

Recently, the scope of the smart factory has been expanded, and process research to minimize the part that requires manpower in many processes is increasing. In the case of detecting defects in the appearance of small products, precise verification using a vision system is required. Reliability and speed of inspection are inefficient for human inspection. In this paper, we propose an algorithm for inspecting product appearance defects using a machine vision system. In the case of the remote control targeted in this paper, the appearance is different for each product. Due to the characteristics of the remote control product, the data obtained using two cameras is compared with the master data after denoising and stitching steps are completed. When the algorithm presented in this paper is used, it is possible to detect defects in a shorter time and more accurately compared to the existing human inspection.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.836-841
• /
• 2004

This paper describes ASIC design for brightness revision control, A LED Pixel Matrix (LPM) design and LPM in natural color LED vision. A designed chip has 256 levels of gradation correspond to each Red, Green, Blue LED pixel respectively, which have received 8bit image data. In order to maintain color uniformity by reducing the original rank error of LED, we adjusted the specific character value 'a' and brightness revision value 'b' to pixel unit, module unit and LED vision respectively by brightness characteristic function with 'Y=aX+b'. In this paper, if designed custom chip and brightness revision control method are applied to manufacturing of natural color LED vision, we can obtain good quality of image. Furthermore, it may decrease the cost for manufacturing LED vision or installing the plants.