• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.643-646
• /
• 2000

In this study, we constructed a preview-sensing visual sensor system for weld seam tracking in real time in GMA welding. A sensor part consists of a CCD camera, a band-pass filter, a diode laser system with a cylindrical lens, and a vision board for inter frame process. We used a commercialized robot system which includes a GMA welding machine. To extract the weld seam we used a inter frame process in vision board from that we could remove the noise due to the spatters and fume in the image. Since the image was very reasonable by using the inter frame process, we could use the simplest way to extract the weld seam from the image, such as first differential and central difference method. Also we used a moving average method to the successive position data of weld seam for reducing the data fluctuation. In experiment the developed robot system with visual sensor could be able to track a most popular weld seam, such as a fillet-joint, a V-groove, and a lap-joint of which weld seam include planar and height directional variation.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2024년도 제69차 동계학술대회논문집 32권1호
• /
• pp.289-290
• /
• 2024

PCB(Printed circuit board)생산시에 중요한 역할을 담당하는 비전검사 시스템의 성능은 지속적으로 발전해왔다. 기존 머신 비전 검사 시스템은 이미지가 불규칙하고 비정형일 경우 해석이 어렵고 전문가의 경험에 의존한다. 그리고 비전검사 시스템 개발 당시의 기준과 다른 불량이 발생한다면 검출이 불가능 하거나 정확도가 낮게 나온다. 본 논문에서는 이를 개선하고자 딥러닝 영상인식을 이용한 PCB 기판 비전 검사 시스템을 구현하였다. 딥러닝 영상인식 알고리즘은 YOLOv4를 이용하고, 워핑(warping)과 시킨 PCB 이미지를 학습하여 비전검사 시스템을 구성하였다. 딥러닝 영상인식 기술의 처리 속도를 보완하고자 QR코드로 PCB 기판 종류를 인식하고, 해당 PCB 부품의 미삽은 정답 이미지 바운딩 박스 좌표와 비교하여 불량품을 발견하면 표시해준다. 기판의 부품 인식을 위해 기판 데이터는 직접 촬영하여 수집하였다. 이를 활용하여 PCB 생산 공정에서 비전검사 시스템의 성능이 향상되었고,, 다양한 PCB를 생산에 신속하게 대응할 수 있다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권4호
• /
• pp.161-164
• /
• 2006

In this thesis we designed the vision system to inspect the defect of a back light unit of plat panel display device. The vision system is divided into hardware and inspection algorithm of defect. Hardware components consist of illumination part, robot-arm controller part and image-acquisition part. Illumination part is made of acrylic panel for light diffusion and five 36W FPL's(Fluorescent Parallel Lamp) and electronic ballast with low frequency harmonics. The CCD(Charge-Coupled Device) camera of image-acquisition part is able to acquire the bright image by the light coming from lamp. The image-acquisition part is composed of CCD camera and frame grabber. The robot-arm controller part has a role to let the CCD camera move to the desired position. To take inspections of surface images of a flat panel display it can be controlled and located every nook and comer. Images obtained by robot-arm and image-acquisition board are saved on the hard-disk through windows programming and are tested whether there are defects by using the image processing algorithms.

• International Journal of Advanced Culture Technology
• /
• 제4권4호
• /
• pp.81-86
• /
• 2016

In this paper, we propose a simple and effective vision-based tracking controller design for autonomous object tracking using multicopter. The multicopter based automatic tracking system usually unstable when the object moved so the tracking process can't define the object position location exactly that means when the object moves, the system can't track object suddenly along to the direction of objects movement. The system will always looking for the object from the first point or its home position. In this paper, PID control used to improve the stability of tracking system, so that the result object tracking became more stable than before, it can be seen from error of tracking. A computer vision and control strategy is applied to detect a diverse set of moving objects on Raspberry Pi based platform and Software defined PID controller design to control Yaw, Throttle, Pitch of the multicopter in real time. Finally based series of experiment results and concluded that the PID control make the tracking system become more stable in real time.

• 한국BIM학회 논문집
• /
• 제7권1호
• /
• pp.45-53
• /
• 2017

Continuous research efforts have been made on acquiring location data on construction sites. As a result, GPS and RFID are increasingly employed on the site to track the location of equipment and materials. However, these systems are based on radio frequency technologies which require attaching tags on every target entity. Implementing the systems incurs time and costs for attaching/detaching/managing the tags or sensors. For this reason, efforts are currently being made to track construction entities using only cameras. Vision-based 3D tracking has been presented in a previous research work in which the location of construction manpower, vehicle, and materials were successfully tracked. However, the proposed system is still in its infancy and yet to be implemented on practical applications for two reasons. First, it does not involve entity matching across two views, and thus cannot be used for tracking multiple entities, simultaneously. Second, the use of a checker board in the camera calibration process entails a focus-related problem when the baseline is long and the target entities are located far from the cameras. This paper proposes a vision-based method to track multiple workers simultaneously. An entity matching procedure is added to acquire the matching pairs of the same entities across two views which is necessary for tracking multiple entities. Also, the proposed method simplified the calibration process by avoiding the use of a checkerboard, making it more adequate to the realistic deployment on construction sites.

• Journal of Biosystems Engineering
• /
• 제25권5호
• /
• pp.409-414
• /
• 2000

A machine vision system was built to obtain single stationary image from an egg. This system includes a CCD camera, an image processing board and a lighting system. A computer program was written to acquire, enhance and get histogram from an image. To minimize the evaluation time, the artificial neural network with the histogram of the image was used for eggshell evaluation. Various artificial neural networks with different parameters were trained and tested. The best network(64-50-1 and 128-10-1) showed an accuracy of 87.5% in evaluating eggshell. The comparison test for the elapsed processing time per an egg spent by this method(image processing and artificial neural network) and by the processing time per an egg spent by this method(image processing and artificial neural network) and by the previous method(image processing only) revealed that it was reduced to about a half(5.5s from 10.6s) in case of cracked eggs and was reduced to about one-fifth(5.5s from 21.1s) in case of normal eggs. This indicates that a fast eggshell evaluation system can be developed by using machine vision and artificial neural network.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.107-117
• /
• 2016

We develop a new method to globally calibrate the feature points that are derived from the binocular systems at different positions. A three-DOF (degree of freedom) global calibration system is established to move and rotate the 3D calibration board to an arbitrary position. A three-DOF global calibration model is constructed for the binocular systems at different positions. The three-DOF calibration model unifies the 3D coordinates of the feature points from different binocular systems into a unique world coordinate system that is determined by the initial position of the calibration board. Experiments are conducted on the binocular systems at the coaxial and diagonal positions. The experimental root-mean-square errors between the true and reconstructed 3D coordinates of the feature points are 0.573 mm, 0.520 mm and 0.528 mm at the coaxial positions. The experimental root-mean-square errors between the true and reconstructed 3D coordinates of the feature points are 0.495 mm, 0.556 mm and 0.627 mm at the diagonal positions. This method provides a global and accurate calibration to unity the measurement points of different binocular vision systems into the same world coordinate system.

• 한국정보전자통신기술학회논문지
• /
• 제2권2호
• /
• pp.45-50
• /
• 2009

본 논문에서는 영상처리를 이용하여 온라인으로 교통표지판을 인식하는 비젼 시스템을 제안한다. 제안된 시스템은 넓은 두 개의 카메라, 즉 광각렌즈(wide-angle lends)와 망원렌즈(telephoto lends)를 장착하였고, 이미지처리 보드가 있는 PC로 구성되었다. 이 시스템은 색상, 밝기, 형태 등과 같은 정보를 이용하여 광각이미지의 교통표지판을 추출한 다음, 보다 큰 이미지에서 정확한 표지판 후보영역을 추출하기 위해 망원렌즈에서 포착된 이미지를 이용하여 처리하였다. 실험결과로써 수동으로 촬영한 비디오 연속장면에서 포착한 영상을 시용하여 실험한 결과 속도표지판은 추출율 96.5%, 인식률 34.4% 그리고 안내표지판은 추출율 100%, 인식률 40%의 결과를 나타내었다. 또한 간단한 실행과정으로 빠른 인식률을 얻을 수 있었으며, 도로상에서의 실험으로 시스템의 효용성을 입증하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.436-438
• /
• 2019

에어하키 로봇은 머신 비전 시스템으로 하키 공을 카메라를 통해 인식하여 사용자와 플레이를 할 수 있다. 하키 공의 위치 감지는 OpenCV 라이브러리를 사용하여 공의 색 정보를 이용하여 인식하게 구현하였다. 하키 공의 위치를 감지하고 또한 그 궤적을 예측하여 결과를 ARM Cortex-M 보드로 전송한다. ARM Cortex-M보드는 2축 직교 로봇을 제어하여 에어 하키 경기를 진행한다. 에어 하키 로봇의 전략에 따라 수비, 공격, 수비과 공격 모드로 동작시킬 수 있다. 본 논문에서는 비전 시스템 개발과 궤적 예측 시스템에 관해 기술하고 에어 하키 경기를 진행하는 2축 직교 로봇을 제어하는 새로운 방법을 제시한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.369-372
• /
• 2002

In this research, a vision system for detecting tool breakage which is hardly detected by such indirect in-process measurement method as acoustic emission, cutting torque and motor current was developed and embedded into a PC-NC system. The vision system consists of CMOS image sensors, a slit beam laser generator and an image grabber board. Slit beam laser was emitted on the tool surface to separate the tool geometry well from the various obstacles surrounding the tool. An image of tool is captured through two steps of signal processing, that is, median filtering and thresholding and then the tool is estimated normal or broken by use of change of the centroid of the captured image. An air curtain made by the jetting high-pressure air in front of the lens was devised to prevent the vision system from being contaminated by scattered coolant, cutting chips in cutting process. To embed the vision system to a Siemens PC-NC controller 840D NC, an HMI(Human Machine Interface) program was developed under the Windows 95 operating system of MMC103. The developed HMI is placed in a sub window of the main window of 840D and this program can be activated or deactivated either by a soft key on the operating panel or M codes in the NC part program. As the tool breakage is detected, the HMI program emit a command for automatic tool change or send alarm to the NC kernel. Evaluation test in a high speed tapping center showed the developed system was successful in detection of the small-radius tool breakage.