• The korean journal of orthodontics
• /
• v.34 no.4 s.105
• /
• pp.333-342
• /
• 2004

The purpose of this study was to evaluate the clinical effectiveness of a plasma arc light and light emitting diode (LED), compared with shear bond strength and the failure pattern of brackets bonded with visible light in direct bonding. Brackets were bonded with Transbond XT to 60 human premolars embedded in the resin blocks according to different light-curing methods. Then, the shear bond strength of each group was measured using a universal testing machine (Instron) and the adhesive failure pattern after debonding was visually examined by light microscope. The results were as follows: 1. The shear bond strength showed no significant difference between the visible light and light emitting diode, but the plasma arc light exhibited a significantly lower shear bond strength compared with the visible light and light emitting diode. 2. In the visible light and light emitting diode, adhesive failure patterns were similar. Bond failure occurred more frequently at the enamel-adhesive interface. 3. The bonding failure of brackets bonded with plasma arc light occurred more frequently at the bracket-adhesive interface. The results of this study suggest that plasma arc light, light emitting diode and visible light are all clinically useful in the direct bonding of orthodontic brackets.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.249-255
• /
• 2014

In this paper, we proposed to reduce the interference in the visible light Communication with multi-LEDs for improving the performance of BER and satisfied the QoS. LED is not only lighting device, but also transmitting device in the VLC. Our proposed system is aim to decrease the interference in the multi-LEDs. In addition, it occurred the ISI and CCI by transmitter to receiver different distance. To solve this problem, we proposed the multi-LEDs system using walsh code to reduce ISI and CCI. In addition, our proposed system is able to improve the performance of BER and satisfied the Qos to desire users.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.560-567
• /
• 2011

In this paper, we reduced the optical noise interference using polarizers in a visible light communication system. In a transmitter, two light-emitting diodes(LEDs) are modulated synchronously by the original and the reversed signals of the transmitted data, and the two LED lights are radiated through orthogonal polarizers. In a receiver, two optical signals are detected through orthogonal polarizers and differentially amplified to remove the optical noise. In an environment that noise light from a fluorescent lamp is much stronger than the signal, the receiver with orthogonal polarizers removed the 120 Hz noise, and synchronous light transmission of the original and the reversed signals using two LEDs reduced the illumination flickering to about one-eighth that using one LED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.887-890
• /
• 2008

We present 2D slab silicon-based photonic crystal optical insulator to enhance light emission efficiency of light-emitting diode (LED). A 2D slab silicon photonic crystal is designed in such a way that light emitting diode die can be placed in the middle of the silicon photonic crystal. The device creates light propagation forbidden region in horizontal plane for Transverse Electric (TE) light with the wavelength range of 450 nm to 600 nm.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.203-209
• /
• 2012

Visible light communications (VLC) use modern solid-state light-emitting diodes (LEDs) to broadcast information. Emerging white-light LEDs allow the combination of lighting and optical wireless communication in one optical source. In this paper, a new LED lighting design using one-chip-type white LEDs is proposed for efficient illumination and optical wireless communications under the existence of several obstacles. Lighting and communication performance are analyzed to show the effectiveness of the proposed LED lighting. Specifically, the signal-to-noise ratio considering intersymbol interference and the bit-error rate of variable pulse position modulation (VPPM) with dimming control are considered.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1391-1395
• /
• 2011

In this paper, would implement a transceiver for the visible light communication that based on wireless communication driving technology for LED illumination-based infrared ray communication, and measurement analyzed a design error rate of a transceiver variable rate has made about distance change -2.5m. The error rate measured a voltage variable along illuminate change between switchable circumstances, which has illuminated insight and outright. Each analyzed and measurement on the communication distance errors along the differences of disturbance light between night and days. The LED module has implemented for number of 6 through illumination dimming in case of different values. Also, implementation for the system module of a VLC transceiver based on the infrared sensors which used feedback outcome value has analyzed with error rate.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.290-293
• /
• 2013

본 연구에서는 최근 각광받고 있는 융합기술 중의 하나인 가시광 통신 기술을 개발하고 실제 시제품을 구현하기 위한 시스템 기술에 대해서 기술한다. 전 세계적으로 LED조명 시장이 급성장하고 있고 또한 이를 활용한 가시광통신(visible light communication:VLC) 기술이 화두가 되고 있다. 이에 따라서 본 논문에서는 현재 개발중인 LED기반 VLC 시스템 기술을 송신 및 수신 모듈로 분류하고 개별 모둘에 대한 구체적인 개발 시스템에 대해서 소자 및 주요 부품의 특성을 기반으로 제시한다. 또한 실제 개발된 시스템을 통해 약 0.5m 거리에서 약 12Mbps의 데이터 전송이 가능함을 보인다. 개발된 기술은 가정 내 또는 실내 주차장 등과 같이 실내 측위 또는 데이터 서비스 등에서 중요한 역할을 할 것으로 기대된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.65-67
• /
• 2021

This thesis is to proposer a new algorithm for a position measurement system using a trilateration method through visible light communication(VLC), by light emitting diode(LED). The length from each LED to the sensor is derived, and location information is found using trilateration method based on the derived length. Unlike th existing positioning system using visible light communication, the proposed positioning system is simpler and more cost effective because it does not require communication between the transmitter and the receiver.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.565-569
• /
• 2008

• Review of Korean Society for Internet Information
• /
• v.10 no.1
• /
• pp.85-92
• /
• 2009