• Journal of the Korean Applied Science and Technology
• /
• v.4 no.1
• /
• pp.19-22
• /
• 1987

To investigate the protective action of various antioxidants on the photooxidation of rice bran oil, it was irradiated with red and visible light in presence and absence antioxidants with or without sensitizer (methylene blue). 1. Rice bran oil with and without sensitizer in chloroform-ethanol (4:1, v/v) media was largely oxidized under visible light irradiation. on the other hand, rice bran oil without sensitizer was hardly oxidized under red light irradiation. 2. Rice bran oil with sensitizer was oxidized much faster than that without. And the absorbance of it irradiated with visible was increased more than that with red light. 3. The effectiveness of antioxidants on the rice bran oil photooxidation was same order as follows: Irradiation with visible light, no addition of sensitizer ${\beta}$-carotene > dl-{$\alpha}$-tocopherol > BHT > BHA Irradiation with visible light, addition of sensitizer ${\beta}$-carotene > BHT > dl-${\alpha}$tocopherol > BHA Irradiation with red light, addition of sensitizer ${\beta}$-carotene > BHA > BHT > dl-${\alpha}$-tocopherol From these results, we concluded that rice bran oil was largely oxidized under visible light irradiation, therefore it must be protected from photooxidative deterioration by the addition of antioxidants.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.427-429
• /
• 2002

We studied iron release from ferritin by irradiating the visible light, and then followed ferritin-mediated lipid peroxidation in the rod outer segment (ROS) fraction of the porcine retina. In the presence of several phosphorus compounds such as ADP and ATP, iron release from ferritin at pH 7.0 could be induced by irradiation of the visible light to the reaction mixtures. Furthermore, iron release from ferritin in the presence of ADP depended on the incubation time and the visible light irradiation. Moreover, we investigated lipid peroxidation level in the ROS fraction by two independent assay systems including the thiobarbituric acid (TBA) and ferrous oxidation/xylenol orange (FOX) methods. The visible light induced ferritin-mediated lipid peroxidation in the ROS fraction in time- and irradiance-dependent manners. In the dark condition, iron release and lipid peroxidation were not observed. Iron release from ferritin by irradiating the visible light may play an important role in the etiology of phototoxic injuries in vivo.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.306-308
• /
• 1997

The Maxwell displacement current was investigated in the connection with stwiching characteristics by photoisomerization of monolayers. The displacement current was generated due to the trans-to-cis photoisomerization by irradiation with ultraviolet light( λ$_1$1=360nm). whereas the displacement current was generated in the opposite direction due to the sis-to-trans photoisomerization by irradiation with visible light( λ$_1$=450nm). The reversible displacement current generation was found to be sustained by alternative irradiation with UV light and visible light.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.368-382
• /
• 1998

The purpose of this study is to evaluate and compare the results of argon laser for 5 seconds, argon laser for 10 seconds, and visible light for 40 seconds photo-polymerization in compressive strength, microhardness, curing depth, temperature rising during polymerization, and polymerization shrinkage. Hybrid type composite resin(Z-100) and compomer(Dyract) were used to be compared. The compressive strength was measured by an Instron(1mm/min cross head speed) in 60 specimens and the microhardness of the surface was expressed by Vickers Hardness Number(VHN) in 30 specimens. The curing depth was evaluated comparing the different values of upper and lower VHN according to irradiation time and thickness for the light source polymerization in 60 specimens. The temperature rising during photopolymerization was observed by the temperature change with thermocouple sensitizer beneath 40 specimens at the argon laser for 10 seconds and visible light 40 seconds irradiation. The polymerization shinkage was evaluated by calculating the decrease of % volume by using a dilatometer in 30 specimens. The results were as follows ; 1. In the case of compressive strength, the argon laser polymerization groups were higher than visible light group in Z-100 (p<0.05). In Dyract, the argon laser 5 seconds group did not show a significant difference with the visible light 40 seconds group. The argon laser 10 seconds group showed the markedly low value when compared with other groups (p<0.05) 2. In microhardness, Z-100 was better than Dyract when comparing by VHNs (p<0.05); however, there was not a significant difference between two materials in the visible light 40 seconds group and the argon laser 10 seconds group. 3. In the study of curing depth, Z-100 showed the consistent polymerization in argon laser irradiation because there was no difference in the VHN decrease according to the thickness change. Over the thickness control, the results did not show a significant difference between visible light and argon laser group in Z-100; however, in the case of Dyract, the visible light 40 seconds group was better than the argon laser groups(p<0.05). 4. There was a significant difference between the two materials in temperature rising during polymerization (p<0.05), but not a significant difference between irradiation times, 5. There was not a significant difference between the two materials in polymerization shrink age. The argon laser 5 seconds group was smaller than the other groups (p<0.05). It could be concluded that Z-100 polymerization was recommended to use the argon laser for reduction of the irradiation time while Dyract was recommended to use the visible light polymerization.

• Korean Journal of Materials Research
• /
• v.25 no.9
• /
• pp.455-461
• /
• 2015

SnS-$TiO_2$ nanocomposites are synthesized using simple, cheap, and less toxic $SnCl_2$ as the tin (II) precursor. The prepared nanoparticles are characterized using powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV-Vis diffuse reflectance spectra (DRS). The XRD and TEM results indicate that the prepared product has SnS nanoparticles and a grain diameter of 30 nm. The DRS demonstrate that SnS-$TiO_2$ possesses the absorption profile across the entire visible light region. The generation of reactive oxygen species is detected through the oxidation reaction from 1,5-diphenyl carbazide (DPCI) to 1,5-diphenyl carbazone (DPCO). It is found that the photocurrent density and photocatalytic effect increase with the modified SnS. Excellent catalytic degradation of Texbrite BA-L (TBA) solution is observed using the SnS-$TiO_2$ composites under visible light irradiation. It is proposed that both the strong visible light absorption and the multiple exciton excitations contribute to the high visible light photocatalytic activity.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1589-1595
• /
• 2010

In order to effective degradation of organic dye both under visible light or ultrasonic irradiation, the MWCNTs (multiwalled carbon nanotube) deposited with Fe and $TiO_2$ were prepared by a modified sol-gel method. The Fe/$TiO_2$-MWCNT catalyst was characterized by surface area of BET, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX) and ultraviolet-visible (UV-vis) spectroscopy. The low intensity visible light and low power ultrasound was as an irradiation source and the methylene blue (MB) was choose as the model organic dye. Then degradation experiments were carried out in present of undoped $TiO_2$, Fe/$TiO_2$ and Fe/$TiO_2$-MWCNT catalysts. Through the degradation of MB solution, the results showed the feasible and potential use of Fe/$TiO_2$-MWCNT catalyst under visible light and ultrasonic irradiation due to the enhanced formation of reactive radicals as well as the possible visible light and the increase of ultrasound-induced active surface area of the catalyst. After addition of $H_2O_2$, the MB degradation rates have been accelerated, especially with Fe/$TiO_2$-MWCNT catalyst, in case of that the photo-Fenton reaction occurred. The sonophotocatalysis was always faster than the respective individual processes due to the more formation of reactive radicals as well as the increase of the active surface area of Fe/$TiO_2$-MWCNT catalyst.

• Environmental Engineering Research
• /
• v.22 no.4
• /
• pp.426-431
• /
• 2017

Some phototoxicity of titanium dioxide nanoparticles ($TiO_2$ NPs) has been reported in recent years in studies with fish embryos or larvae. However, it is necessary to focus on the potential effects of embryonic exposure due to irreversible abnormalities and mortalities observed in sac-fry, and to expand various fish embryos to generate multiple test species. The aim of this study was to evaluate the effects of $TiO_2$ NPs under different irradiation conditions in exposed Oryzias latipes (O. latipes) at the embryonic and sac-fry stages. The effects of different irradiation conditions were observed using ultra-violet (UV) and visible light, and the corresponding effects were monitored by determining cumulative mortality and abnormality. O. latipes were exposed for 8 d to 0, 1, 5, 10, or 50 mg/L $TiO_2$ NPs under UV ($4,818.86mW/m^2$ at the bottom of clear vials) or visible light, after which the embryos were transferred to NP-free embryo-rearing solution until 16 days post fertilization (dpf). Abnormalities of embryos and sac-fry increased at high $TiO_2$ NP concentrations under UV irradiation, compared to control samples treated with visible light or UV irradiation alone. This work provides information regarding the phototoxicity of $TiO_2$ NPs using O. latipes at the embryonic and sac-fry stages.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2613-2616
• /
• 2009

FeOOH/$TiO_2$, a heterojunction structure between FeOOH and $TiO_2$, was prepared by covering the surface of the $\sim$100-nm-sized FeOOH particles with Degussa P25 by applying maleic acid as an organic linker. Under visible light irradiation (${\lambda}{\geq}$ 420 nm), FeOOH/$TiO_2$ showed a notable photocatalytic activity in removal of gaseous 2-propanol and evolution of $CO_2$. It was found that FeOOH reveals a profound absorption in the spectral range of 400 - 550 nm, and its valence band (VB) level is located relatively lower than that of $TiO_2$. The considerable photocatalytic efficiency of the FeOOH/$TiO_2$ under visible light irradiation was therefore deduced to be caused by the hole transfer between the VB of FeOOH and $TiO_2$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.1
• /
• pp.42-46
• /
• 2011

Light can be divided into ultraviolet rays, visible rays, and infrared rays depending on the wavelengths. Visible rays with specific wavelength are those predominantly used for would treatment. Especially low level laser irradiates into cells, effectively stimulating cellular tissues and activating cellular function. This study was intended to verify the effect of white LED irradiation therapy on wound recovery in animal tests by applying white LED irradiator, which was independently designed and developed to emit beams of similar wavelength to that of a laser. The designed LED Irradiator was used to find out how white LED light source affected the skin wound of SD-Rat(Sprague-Dawley Rat). We divided the participants into two groups; white LED irradiation group which was irradiated 1 hour a day for 9 consecutive days, and none irradiation group. The results showed that the study group had lower incidence of inflammation and faster recovery, compared with the control group.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1882-1884
• /
• 1999

The photoisomerization of functional polyimide was investigated in the various temperatures and UV(360nm) & visible(450nm) light irradiation. The absorption spectrum of azobenzene containing polyamic acid in a mixture of N,N-dimethylacetamide and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. The absorption spectrum of LB films are also induced photoisomerization by UV and visible light irradiation.