• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.127-131
• /
• 2008

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.149-155
• /
• 2020

In this study, we employed Manchester code for illumination control and flicker prevention of the light-emitting diode (LED) used in a visible light communication (VLC) system. In the VLC transmitter, the duty factor of the Manchester code was utilized for illumination control; in the VLC receiver, the spike signal from an RC-high pass filter was utilized to recover the transmitted signal whilst suppressing the 120-Hz noise arising from adjacent lighting lamps. Instead of the clock being transmitted in a separate channel, a syncmark signal was transmitted in front of each data byte and used as the reference time for transforming the Manchester code to non-return-to-zero (NRZ) data in the receiver. In experiments, the LED illumination was controlled in the range of approximately 12-84% of the constant wave (CW) light via changing of the duty factor from 10% to 90%. This scheme is useful for constructing indoor wireless sensor networks using LED light that is flicker-free and presents capability for illumination control.

• Journal of Sensor Science and Technology
• /
• v.28 no.3
• /
• pp.191-197
• /
• 2019

In this study, we propose a dimming control method for a visible light communication (VLC) system, in which the subcarrier on-off keying (OOK) modulation of Manchester code is used for data transmission. In the VLC transmitter, non-return-to-zero (NRZ) code data is transformed to Manchester code, which is OOK modulated with a subcarrier. Manchester code is used for flicker-free lighting; the duty factor is changed for dimming control, and the subcarrier is used for preventing the adjacent noise light interference. In the experiments, the dimming control was carried out from about 8%-92% of the continuous wave (CW) LED light. This configuration is simple and effective in constructing a VLC system for indoor wireless sensor networks with flicker-free illumination and dimming control capability without adjacent noise light interference.

• Journal of Sensor Science and Technology
• /
• v.30 no.2
• /
• pp.99-104
• /
• 2021

In this study, we utilized the duty factor of the transition frequency modulation (TFM) for the illumination control of the light emitting diode (LED) light in visible light communication (VLC). The average optical power is linearly proportional to the duty factor in TFM waveforms. We used the transition frequencies of Na=5 and Nb=1 for the high and the low bits, respectively, of the non-return-to-zero (NRZ) data in the VLC transmitter. A resistor and capacitor high-pass filter (HPF) was used in the VLC receiver to eliminate the 120 Hz optical noise from adjacent lighting lamps and the spikes at the HPF output were used to recover NRZ data from the TFM waveform. In experiments, the illumination of the LED light was controlled in the range of 25-90% of the constant-wave optical power by changing the duty factor of the TFM waveforms.

• Journal of Convergence for Information Technology
• /
• v.10 no.2
• /
• pp.32-38
• /
• 2020

In this paper, we analyze the modulation scheme for high speed transmission in visible light communication system, and study non-orthogonal multiplexing, dimming level and transmission power ratio. Conventional visible light communication has a disadvantage in that it is difficult to multi-transmit to increase the transmission speed. Multi-transmission technique is necessary for high-speed transmission at the transmitter. Since general visible light communication has a limitation in multiple transmission, various researches for high-speed transmission have been conducted. In order to solve this problem, this paper proposes a multiple modulation scheme for high-speed visible light communication using non-orthogonal multiplex transmission scheme and a future research direction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.130.1-130.1
• /
• 2013

We made attempts to improve photocatalytic activity of $TiO_2$ nanoparticles under visible light exposure by combining two additional treatments. N-doping of $TiO_2$ by ammonia gas treatment at $600^{\circ}C$ increased absorbance of visible light. By coating thin film of polydimethylsiloxane (PDMS), and subsequent vacuum-annealing at $800^{\circ}C$, $TiO_2$, became more hydrophilic, thereby enhancing photocatalytic activity of $TiO_2$. Four types of $TiO_2$ samples were prepared, bare-$TiO_2$, hydrophilic-modified $TiO_2$ ($h-PDMS/TiO_2$), N-doped $TiO_2$ ($N/TiO_2$) and hydrophilic-modified and N-doped $TiO_2$ ($h-PDMS/N/TiO_2$). Adsorption capability was evaluated under dark condition and photocatalytic activity of $TiO_2$ was evaluated by photodegradation of MB under blue LED (400 nm< ${\lambda}$) irradiation. N-doping on $TiO_2$ was characterized using XPS and hydrophilic modification of $TiO_2$ surface was analyzed by FT-IR spectrometer. It was found that N-doping and hydrophilic modification both had positive effect on enhancing adsorption capability and photocatalytic activity of $TiO_2$ at the same time. Particularly, N-doping enhanced visible light absorption of $TiO_2$, whereas hydrophilic surface modification increased MB adsorption capacity. By combining these two strategies, photocatalytic acitivity under visible light irradiation became the sum of individual effects of N-doping and hydrophilic modification.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.25-30
• /
• 2021

In this paper, we studied the coding technique for flicker mitigation and BER performance improvement in visible light communication system. In order to increase the transmission speed of visible light communication, a multi-transmission multi-LED transmission system using a plurality of LEDs is being actively studied. However, when data is transmitted through N LEDs in a multi-LED visible light communication system using N LEDs, there is a continuous zero section in which 0 is transmitted simultaneously according to the data sequence, and since the transmission section of 1 is different, flickering Or, a phenomenon in which the dimming level changes occurs. The visible light communication system is a communication system that simultaneously performs communication and lighting functions. Therefore, transmission efficiency of communication and brightness of lighting must be considered at the same time. To solve this problem, we proposed a flicker reduction mapping that can alleviate flicker and dimming level problems, improve error detection and BER performance through coding mapping of each LED data sequence.

• Journal of the Korean Chemical Society
• /
• v.61 no.4
• /
• pp.168-178
• /
• 2017

$La/TiO_2$ - graphene composites were synthesized in this study, and applied to the photocatalytic degradation of Rhodamine B (RhB) under UV-visible light irradiation. X-ray diffraction (XRD), surface analysis, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM), and Transmission electron microscopy (TEM) analysis demonstrated that $La/TiO_2$ nanoparticles were well distributed on the surface of graphene, and formed the heterostructure of $La/TiO_2$-graphene. Compared to the pure $TiO_2$, $La/TiO_2$-graphene composites displayed much higher photocatalytic activities in RhB degradation under UV-visible light irradiation. The photocatalytic data of $La/TiO_2$-graphene composites exhibit extended light absorption in the visible light region, and possess better charge separation capability than that of pure $TiO_2$. The high photocatalytic activity was attributed to the composite's high adsorptivity, extended light absorption, and increased charge separation efficiency, due to the excellent electrical properties of graphene, and the large surface contact between graphene and $La/TiO_2$ nanoparticles.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.41-46
• /
• 2014

In this paper, a transceiver of VLC (Visible Light Communication) using LED white lighting has been implemented. We analyzed differences between conventional wireless communication and VLC with high-speed data transmission in a variety of environments, and confirmed symbols which passed through a channel using QAM. In order to get a high data rate, we found some variables that should be considered essentially though experiments. In addition, we set a bandwidth and found an optimal gain according to the distance between transmitter and receiver. We analyzed proposed system model through Labview and finally showed a system performance. The performance showed a 2Mbps QAM data rate in real visible light indoor channels.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.579-585
• /
• 2020

In this study, we used byte-inversion transmission method to prevent the flicker of lighting source in a visible light data communication link. In the transmitter, the non-return-to-zero (NRZ) signal with 9.6 kbps was on-off keying (OOK) modulated with a 100 kHz square wave carrier and byte-inversion signal was added after each byte to make the average optical power of the light-emitting diode (LED) constant. In the receiver, we used a band-pass filter to eliminate the interference of the 120 Hz noise which was induced from the adjacent light lamps, and an OOK demodulator to recover the original NRZ signal This scheme is useful in constructing wireless data networks using the illumination of visible light lamps.