• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.443-452
• /
• 2008

To deduce 3D linear information which express shapes of buildings out of airphoto by fusion of airphoto and LiDAR data, this research went through 2 process. First, research made LiDAR data into projected data of 2D based on airphoto. For this, the virtual points were added to solve the visual problem of building boundary area which has poor information because the attribute in LiDAR data. Research construct irregular triangular nets from modified LiDAR data and judge visual triangular nets out of image. Through this, research can make reference to information of triangular nets in each image pixel. Second, 3D information was extracted from stereo images segments by combining extracted information of visible region and 2D irregular triangular nets. Matching way based on TIN for segments from stereo images was used. Matching condition based on TIN can improve about 20% of edge matching accuracy compared to existing quadrilateral condition of epipolar geometry.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.1
• /
• pp.39-49
• /
• 2018

In the satellite operation phase, a ground station should continuously monitor the status of the satellite and sends out a tasking order, and a satellite should transmit data acquired in the space to the Earth. Therefore, the communication between the satellites and the ground stations is essential. However, a satellite and a ground station located in a specific region on Earth can be connected for a limited time because the satellite is continuously orbiting the Earth, and the communication between satellites and ground stations is only possible on a one-to-one basis. That is, one satellite can not communicate with plural ground stations, and one ground station can communicate with plural satellites concurrently. For such reasons, the efficiency of the communication schedule directly affects the utilization of the satellites. Thus, in this research, considering aforementioned unique situations of spacial communication, the mixed integer programming (MIP) model for the optimal communication planning between multiple satellites and multiple ground stations (MS-MG) is proposed. Furthermore, some numerical experiments are performed to verify and validate the mathematical model. The practical example for them is constructed based on the information of existing satellites and ground stations. The communicable time slots between them were obtained by STK (System Tool Kit), which is a well known professional software for space flight simulation. In the MIP model for the MS-MG problems, the objective function is also considered the minimization of communication cost, and ILOG CPLEX software searches the optimal schedule. Furthermore, it is confirmed that this study can be applied to the location selection of the ground stations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.985-990
• /
• 2007

The method of enhancing visibility in optical fiber sensor was investigated by improving coherence length of light source. The optical feedback technique is used to enhance coherence length in fiber laser which generates laser in near infrared wavelength region and utilizes low loss characteristics of optical communication grade fiber. In this paper, the effect to coherence length by short and long optical feedback paths are investigated by using Mach-Zehnder interferometer technique. The effect to coherence length by changing optical feedback power and optical modulation are investigated. The spectral drift was calculated by measuring the degree of phase perturbation in unbalanced Mach-Zehnder interferometer having loom path difference. The short optical feedback path was effective to reduce spectral drift to 450kHz/sec and the long optical feedback path in combination with short optical feedback path was found to further reduce spectral drift to 50kHz/sec.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1477-1482
• /
• 2022

Haze is a local weather phenomenon in which very small droplets float in the atmosphere, and the amount and characteristics of haze may vary depending on the region. In particular, these haze reduce visibility, which can cause air traffic interference and vehicle traffic accidents, and degrade the quality of security CCTVs and so on. Therefore, in the past 10 years, research on haze removal has been actively conducted to reduce damage caused by haze. In this study, local haze removal is performed by weight generation using a haziness degree evaluator to adaptively respond to haze-free, homogeneous haze, and non-homogeneous haze cases. And the proposed method improves the limitations of the existing static haze removal method, which assumes that there is haze in the input image and removes the haze. We also demonstrate the superiority of the proposed method through quantitative and qualitative performance evaluations with benchmark algorithms.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.2
• /
• pp.83-90
• /
• 2023

Blurred image is an important factor in lowering image recognition rates in Computer vision. This mainly occurs when the camera is unstablely out of focus or the object in the scene moves quickly during the exposure time. Blurred images greatly degrade visual quality, weakening visibility, and this phenomenon occurs frequently despite the continuous development digital camera technology. In this paper, it replace the modified building module based on the Deep multi-patch neural network designed with convolution neural networks to capture details of input images and Attention techniques to focus on objects in blurred images in many ways and strengthen the image. It measures and assigns each weight at different scales to differentiate the blurring of change and restores from rough to fine levels of the image to adjust both global and local region sequentially. Through this method, it show excellent results that recover degraded image quality, extract efficient object detection and features, and complement color constancy.

• Journal of the Economic Geographical Society of Korea
• /
• v.26 no.1
• /
• pp.23-39
• /
• 2023

Due to the recent population decrease and urban decline, it has become increasingly important to induce qualitative changes in the city itself and create a differentiated development model. Local culture, based on its uniqueness and diversity, generates the expansion and ripple effect of various contents through creative utilization. In this study, we examine a new local content approach called "town-stay (village hotel)" that develops cultural content and creates a place-making in terms of creating a sustainable ecosystem with cultural vitality. While the uniqueness and creativity of individual content can make a region's attractiveness stand out, we have seen in the case of small-sized cities in Korea and Japan that content elements (place, story, people) can be materialized into area-level content called town-stay(village hotel). The local contents are densely presented in a specific area to increase visibility and expand into a variety of content that reveals regional connections. Local creators, who are the core actors, understand locality, induce active activities, and pursue sustainable development that promotes not only economic value but also community solidarity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.875-884
• /
• 2000

Sea fog/stratus is very difficult to detect because of the characteristics of air-sea interaction and locality ,and the scantiness of the observed data from the oceans such as ships or ocean buoys. The aim of our study develops new algorism for sea fog detection by using Geostational Meteorological Satellite-5(GMS-5) and suggests the technics of its continuous detection. In this study, atmospheric synoptic patterns on sea fog day of May, 1999 are classified; cold air advection type(OOUTC, May 10, 1999) and warm air advection type(OOUTC, May 12, 1999), respectively, and we collected two case days in order to analyze variations of water vapor at Osan observation station during May 9-10, 1999.So as to detect daytime sea fog/stratus(OOUTC, May 10, 1999), composite image, visible accumulated histogram method and surface albedo method are used. The characteristic value during day showed A(min) .20% and DA < 10% when visible accumulated histogram method was applied. And the sea fog region which is detected is similar in composite image analysis and surface albedo method. Inland observation which visibility and relative humidity is beneath 1Km and 80%, respectively, at OOUTC, May 10,1999; Poryoung for visble accumulated histogram method and Poryoung, Mokp'o and Kangnung for surface albedo method. In case of nighttime sea fog(18UTC, May 10, 1999), IR accumulated histogram method and Maximum brightness temperature method are used, respectively. Maxium brightness temperature method dectected sea fog better than IR accumulated histogram method with the charateristic value that is T_max < T_max_trs, and then T_max is beneath 700hPa temperature of GDAPS(Global Data Assimilation and Prediction System). Sea fog region which is detected by Maxium brighness temperature method was similar to the result of National Oceanic and Atmosheric Administratio/Advanced Very High Resolution Radiometer (NOAA/AVHRR) DCD(Dual Channel Difference), but usually visibility and relative humidity are not agreed well in inland.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.58-66
• /
• 2012

Currently many devices reproduce electronic images in the various ways. However, the color that is reproduced in any device is different from the original color due to the differences in the gamut between devices. A recent trend in gamut mapping algorithms is the use of spatial information to compute the color transformation of pixels from the input to the output gamut. However, these techniques share the problem of preserving details, and avoiding halos, and hue shift. In this paper, spatial gamut mapping for preserving the details of the input image is proposed. Our approach improves visibility of detail that is not effectively represented with conventional spatial gamut mapping. In proposed method, initially, we gamut map the input image using gamut clipping and obtain a detail layer for both the input and the gamut mapped images. Next, we calculate the difference between the two detail layers, obtaining the details of the out of gamut region. Finally, we add the details of out of gamut region to the gamut mapped image. Since the resulting image has out of gamut colors, we obtain resulting image of proposed method by using a gamut clipping method. Consequently, the printed output image was more consistent with the corresponding monitor image.

• Archives of design research
• /
• v.15 no.1
• /
• pp.379-388
• /
• 2002

Since policies of each local government toward regional development have been focusing on only development of the individual applied items such as a character merchandise, co-regional brand, and developing a speciality for the region, the adverse effects of design have been came out. So we carried out this research to minimize the adverse effect of design and also we would like to give the opportunity of thinking of a new way to activate local economy, to create regional identity and to develop local resources by applying the Cl program which have bean used as the way of business improvement coping with the conceptional change of competitiveness with a comprehensive view. Therefore, for design to play an important role in regional development, as standing on the basis of regional development it is necessary to attain the various goals such as activating administrative organization, improving the administrative image, and making the local in go unique. And also it is necessary to develop the communicational strategy as an innovative and expressive program which can consider human network development as an regional resource. To carry out this communicational strategy effectively, in particular, it is not only inevitable to operate the strategic and comprehensive programs promoting the regional development according to the of 6 stages design develop cent program which consists of region's self-verification and self-recognition, self-determination, development of self-innovation, visibility to unify the regional images, creating the design system, and carrying out and verifying the program, but also it is necessary to apply regional development system which can change the regional basic plan, aiming at regional development, into unique regional trait that has an future image by improving the program with constant management and feedback through verifying the design program.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.4
• /
• pp.75-83
• /
• 2010

College campus landscape plans once focused mainly on campus functionality and aesthetically pleasing buildings. Yet now, after the rise of greater emphasis on afforestation and eco-friendly planning, building spaces for the local culture and community has become the core of the plan. This study analyzed the design strategies and details of the landscape plan that was selected through the contest to select a design plan for the cultural park at Sunchon National University. The key considerations for the landscape Design for the cultural space at Sunchon National University areas follows. First, the design plan sought ways to reach out to the local community, going one step beyond just opening up campus facilities. This means more than just the opening of physical facilities and environments. It was designed to serve as a base to organize diversified programs by generations and groups with an aim to share the history and culture of the college, the local community and the region. Second, shapes and colors were designed to establish a unified image between buildings and outdoor facilities. "Three Books" was selected as the key motif as books were believed to be the most representative symbol of colleges while 6 straight lines, hexagons and circles inspired by the shape of three books were used in the design. In terms of colors, reddish-brown was used for buildings to enhance visibility along with harmony and esthetic appreciation. For facilities, black and blue were used as dominant colors and white and yellow as point colors to promote the image of Sunchon City. Third, with an aim to overcome the limitation of the overall college campus as a closed space, it was designed to be a barrier-free space, remaining open to everyone and encouraging visits and experiences for active communication with the local community.