• Tribology and Lubricants
• /
• 제33권6호
• /
• pp.288-295
• /
• 2017

In order to improve the efficiency and reliability of the machine, the friction should be minimized. The most widely used method to minimize friction is to maintain the fluid lubrication state. However, we can reduce friction only up to a certain limit because of viscosity. As a result of several recent studies, surface texturing has significantly reduced the friction in highly sliding machine elements, such as mechanical seals and thrust bearings. Thus far, theoretical studies have mainly focused on isothermal/iso-viscous conditions and have not taken into account the heat generation, caused by high viscous shear, and the temperature conditions on the bearing surface. In this study, we investigate the effect of dimple depth and film-temperature boundary conditions on the thermohydrodynamic (THD) lubrication of textured parallel slider bearings. We analyzed the continuity equation, the Navier-Stokes equation, the energy equation, and the temperature-viscosity and temperature-density relations using a computational fluid dynamics (CFD) code, FLUENT. We compare the temperature and pressure distributions at various dimple depths. The increase in oil temperature caused by viscous shear was higher in the dimple than in the bearing outlet because of the action of the strong vortex generated in the dimple. The lubrication characteristics significantly change with variations in the dimple depths and film-temperature boundary conditions. We can use the current results as basic data for optimum surface texturing; however, further studies are required for various temperature boundary conditions.

• 대한기계학회논문집A
• /
• 제40권2호
• /
• pp.199-206
• /
• 2016

LM 볼가이드는 구름접촉을 갖는 이송시스템의 핵심요소로서 공작기계, 반도체 장비, 로봇 등 정밀기계에 널리 사용된다. 그러나 LM 볼가이드에서 발생하는 마찰력은 마찰열을 유발하여 위치 정도를 저하시키고 강성과 예압 변화를 야기한다. 이런 영향을 정확하게 분석하여 정밀 기계설계에 응용하기 위해서는 마찰력 모델의 정식화가 요구된다. 본 논문에서는 구름마찰, 점성마찰, 슬립마찰을 고려한 LM 볼가이드의 정확한 마찰력 모델을 유도한다. 그리고 다양한 조립, 부하 및 속도 조건에서 실험을 수행하여 마찰력 모델의 신뢰성을 검증하고, 마찰력 모델로부터 마찰 성분의 영향력을 분석한다.

• 수산해양교육연구
• /
• 제9권1호
• /
• pp.40-48
• /
• 1997

In this study, uniform pressure distribution with small hole on the surface of symmetric object were given to reduce the viscous frictional force. The results were as follows : 1. The velocity on upper stream were accelerated by uniform pressure distribution on symmetric objects for reducing the viscous frictional resistances. 2. The effects of the distributed small holes were reduced the viscous frictional resistances in down stream region more than upper stream due to the increasing pressure in reverse flow region. 3. The viscous skin friction on surface of symmetric objects with and without distributed small holes are effect in region of upper stream and much decreased in down stream region due to increasing of boundary layer thickness.

• 한국가스학회지
• /
• 제12권4호
• /
• pp.46-51
• /
• 2008

본 연구에서는 비선형 디스크 스프링과 고무링으로 구성된 완충장치의 감쇠에 관하여 연구하였다. 고무링의 마찰력과 디스크 스프링의 이력현상을 측정하여, 디스크 스프링의 적층 배열에 따른 이력곡선을 근사하고, 소산되는 에너지의 양을 추산하였다. 마찰력과 소산 에너지에 근거하여 네 종류의 감쇠 해석모델을 제시하였으며, 각각의 모델에 대한 충격응답을 고찰하였다. 고무링의 마찰력보다는 디스크 스프링의 이력현상이 완충장치의 감쇠거동에서 더 큰 영향을 미치었다. 가장 실용적인 감쇠 모델로는 소산되는 총 에너지의 양에 근거한 등가 점성 감쇠 모델이 다른 감쇠 모델보다 적합하다는 결론을 얻었다.

• 한국지진공학회논문집
• /
• 제7권6호
• /
• pp.17-24
• /
• 2003

이 논문의 주된 목적은 지진을 받는 구조물의 비탄성 거동을 제어하기 위해 Coulomb 마찰감쇠기의 제어성능을 산출하는 것이다. 능력스펙트럼법을 이용하여 다양한 건물의 내진성능이 평가되나, 만약 평가된 성능수준이 목표수준에 미치지 못할 때는 추가적인 감쇠비를 산출하게 된다. 추가적인 감쇠비를 얻기 위한 마찰감쇠기의 리더 마찰력은 등가 점성 감쇠의 개념을 사용하여 산정된다. 이와 같이 제안된 방법의 효과를 증명하기 위해, 다양한 주기와 항복 후 강성비를 가진 단자유도 구조물들에 대하여 수치해석을 수행하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.799-804
• /
• 2003

Friction phenomenon can be described as two parts which are pre-sliding and sliding regions. In motion of the sliding region, friction forces depend on the velocity of the system and are known as Coulomb, stick-slip, stribeck effect and viscous friction. The pre-sliding region, which is before breakaway, depends on the position of the system. The motion of friction in the sliding region can be described as the LuGre model. But the pre-sliding motion of friction, which has hysteresis characteristics in general, is not known widely. Therefore, an improved friction model, which can describe the motion of friction in the pre-sliding region, is proposed in this paper. And simulation and experimental results show the effectiveness of the proposed friction model for precise tracking control systems.

• Smart Structures and Systems
• /
• 제24권3호
• /
• pp.345-360
• /
• 2019

The shear keys are set in a seismic isolation system to resist the long-term service loadings, and are cut off to isolate the earthquakes. This paper investigated the influence of shear keys on the seismic performance of a vertical spring-viscous damper-concave Coulomb friction isolation system by an incremental dynamic analysis (IDA) and a performance-based assessment. Results show that the cutting off process of shear keys should be simulated in a numerical analysis to accurately predict the seismic responses of isolation system. Ignoring the cutting off process of shear keys usually leads to untrue seismic responses in a numerical analysis, and many of them are unsafe for the design of isolated structure. And those errors will be increased by increasing the cutting off force of shear keys and decreasing the spring constant of shear keys, especially under a feeble earthquake. The viscous damping action postpones the cutting off time of shear keys during earthquakes, and reduces the seismic isolation efficiency. However, this point can be improved by increasing the spring constant of shear keys.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.247-254
• /
• 2003

The paper presents the influence of spring dynamics and friction on dynamic responses in a spring-driven cam system. The characteristics of the friction on the camshaft are analyzed using the nonlinear pendulum experiment while the parameters of the friction model are estimated using the optimization technique. The analysis reveals that the friction of the camshaft depends on stick-slip, Stribeck effect and viscous damping. Spring elements are found to have much influence on the dynamic characteristics. Hence, they are modeled as four-degree-of-freedom lumped masses with equivalent springs. The appropriateness of the derived friction model and spring model is verified by its application to a vacuum circuit breaker mechanism of the cam-follower type.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 춘계학술대회 논문집
• /
• pp.379-386
• /
• 2001

Fluid viscous dampers have been used as energy dissipators or STU's (Shock Transmission Unit) in earthquake resistant designs for bridges. Viscous dampers have many advantages compared to other friction type or visco-elastic type of dampers. They do neither increase internal pier forces due to their out of phase response, nor produce reaction forces at the low velocities associated with thermal movements. Therefore, they anable the super structure to restore itself perfectly after a severe movement dut to seismic excitations. This paper investigates the response of bridges designed with viscous dampers in regard to damping coefficients, properties of dampers, and arrangements of dampers. For this purpose, time-history dynamic analyses have been performed using a very simple model relevant to a typical bridge example. Based on the results, it presents some design duidelines on how to determine a proper damping ratio and on how to arrange dampers. In usual cases, damping coefficients corresponding to about 0.2-0.3 of damping ratios seem to be very effective in bridge designs.

• 유공압시스템학회논문집
• /
• 제2권4호
• /
• pp.23-29
• /
• 2005

In order to improve the efficiency of hydraulic gear pumps or motors especially for high operating pressure, power losses due to viscous friction and leak flow through gear teeth end-gaps are considered in this paper. Optimal gaps minimizing the power loss for pumps and motors with uniform heights of gaps are analysed first. And the effect of the shapes of gaps with unequal heights on the power loss are studied and discussed by simulation. Considering that the outer shell lacing gear teeth may expand due to high internal pressure or thermal stress, the results drawn in this paper can be used for the design of high efficiency pumps and motors.