• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1114-1119
• /
• 2004

In a foaming process of microcellular plastics (MCPs) with a injection molding, research on the viscosity change that occurs when the gas is injected to the polymer has received little attention despite its importance. The purpose of this paper is to provide the basic data required to determine the processing condition by measuring viscosity changes against the gas injection rates of the blowing agent, and to verify the influence of the viscosity change on the flow condition of polymer inside the mold at the injection process.

• 한국건설순환자원학회논문집
• /
• 제8권3호
• /
• pp.365-371
• /
• 2020

본 연구에서는 열매를 수확한 후 폐기되는 손바닥 선인장 줄기를 재활용하기 위하여 선인장 줄기 분말을 시멘트계 재료의 혼화제로 적용하고자 하였다. 이를 위해 선인장 줄기 분말을 혼입한 모르타르의 굳지 않은 특성과 강도에 대한 연구를 수행하였다. 또한 그 결과를 기존의 당류계 혼화제인 지연제 설탕과 증점제 메틸셀룰로오스를 혼입한 모르타르의 특성과 비교하였다. 연구 결과, 선인장 줄기 분말은 지연제로서 효과를 뚜렷하게 보여주지 못하였다. 반면, 선인장 줄기 분말 혼입율이 증가할수록 플로 및 공기량이 메틸셀룰로오스를 혼입한 모르타르와 유사한 경향을 나타내어 증점제로서 활용 가능성을 확인하였다. 또한 선인장 줄기 분말의 혼입율이 0.3% 이내일 때에는 모르타르의 강도가 증가하는 것으로 나타났다.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.317-326
• /
• 2021

In this study, we investigated for Bio-EPDM foam with oyster shell surface modified earth coupling agent. Experiments were carried out to confirm the bio-EPDM/Oyster shell foam applying content of earth coupling agent. The cure characterization were evaluated by measuring the mooney viscosity and oscillating disc rheometer (ODR). Mechanical properties such as hardness, tensile strength, elogation at break and tear strength were measured, and changes of mechanical properties were also evaluated after immersion in NaCl solution. In addition degree of volume change was measured after immersing the Bio-EPDM foam in NaCl solution and the low-temperature permanent compression set was evaluated at 4℃. To evaluate the low-temperature characteristics of Bio-EPDM/Oyster shell, the glass transition temperature was measured using Differential Scanning Calorimeter (DSC). As a result as the content of the earth coupling agent increased up to 3phr, the crosslinking density and mooney viscosity increased, and the mechanical properties and low-temperature permanent compression set improved, but from 4phr, it was rather decreased. The change in the glass transition temperature was insignificant, and the foam cell appeared to be uniform when the earth coupling agent was applied.

• 한국응용과학기술학회지
• /
• 제35권3호
• /
• pp.985-1001
• /
• 2018

W/O 에멀젼; 안정성; 유화제본 연구에서는 일반적으로 O/W 에멀젼에 비해 안정화가 어려운 W/O 에멀젼, 특히 유동성이 높은 저점도 W/O 에멀젼의 안정성 증진을 위하여 유화제, 전해질, 유화 안정화제, 겔화제 등을 적용한 다양한 실험을 수행하여 보았다. 그 결과 이번 실험에서는 Polyglyceryl-4 diisostearate/polyhydroxystearate/sebacate를 주 유화제로 하면서 PEG-30 dipolyhydroxystearate와 Cetyl PEG/PPG-10/1 dimethicone을 보조 유화제로 하는 유화 체계에, 전해질로 Sodium chloride를 0.5 %, 유화 안정화제로 Distearyldimonium chloride를 1 %, 유상 겔화제로 Glyceryl behenate/eicosadioate를 0.5 % 적용한 유화 입자도 작고 조밀하며 점도도 2,000 cps 이하로 일정하게 유지되는 안정한 저점도 W/O 에멀젼을 제조할 수가 있었다. 또한 상기와 같은 에멀젼 베이스에 무기 자외선 차단성분의 적용 실험을 통하여 안정성이 우수한 저점도 플루이드형 자외선 차단제품의 개발 가능성도 긍정적으로 검토할 수가 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.198-201
• /
• 2001

Porous structures of aluminum foam have been studied by using return aluminum scrap. The apparent foam shape, foam height, density, pore size and their distributions in various section areas of the experimental samples have been investigated. The sample have been cast into metallic mold, using aluminum foam prepared from a precursor based on pure Al ingot and return aluminum scrap mixed with various amounts of 1-2wt% increasing viscosity and foam agent materials. The process provides for flexibility in design of foam structures via relatively easy control over the amount of hydrogen evolution and the drainage processes which occur during foam formation. This is facilitated by manipulating parameters such as the foaming agent, thermal histories during solidification and mix melt viscosities. A metal for producing the foamed are decomposing a foaming agent in a molten metal such that there is an initial and a subsequent expansion due to foaming agent. It has been found that the Al porous foaming with variation amount of 1∼2wt% foam agent and at 2min holding time, which melting temperature has appeared homogeneous pore size at 650∼700$^{\circ}C$. The compression strength were 10-13 kg/min at 125ppi, and increased by higher pore density. The acoustical performance of the panel made with the foamed aluminum is considerably improved; its absorption coefficient shows NRC 0.6-0.8. It has been found that the Al foam is very preferable for the compactness of the thermal system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.287-290
• /
• 1998

Recently great efforts and investment have been made in order to achieve economical production by applying new methods like minimization of man-power into construction field. Therefore in this study, we have been focused on the development and practical using of semi-high-fluidity concrete with viscosity agent and fly-ash, also we find out the optimum mix proportions to accomplish good quality semi-high-fluidity concrete. The results of this study show that semi-high-fluidity concrete with viscosity agent of 0.03~0.1%(W$\times$%) and the ratio of fly-ash replacement of 10~20% in W/B of 35~45% has better performance than the high-fluidity-concrete.

• Computers and Concrete
• /
• 제5권5호
• /
• pp.475-490
• /
• 2008

The paper explores the potential of applicability of Genetic programming approach (GP), adopted in this investigation, to model the combined effects of five independent variables to predict the mini-slump, the plate cohesion meter, the induced bleeding test, the J-fiber penetration value, and the compressive strength at 7 and 28 days of self-compacting slurry infiltrated fiber concrete (SIFCON). The variables investigated were the proportions of limestone powder (LSP) and sand, the dosage rates of superplasticiser (SP) and viscosity modifying agent (VMA), and water-to-binder ratio (W/B). Twenty eight mixtures were made with 10-50% LSP as replacement of cement, 0.02-0.06% VMA by mass of cement, 0.6-1.2% SP and 50-150% sand (% mass of binder) and 0.42-0.48 W/B. The proposed genetic models of the self-compacting SIFCON offer useful modelling approach regarding the mix optimisation in predicting the fluidity, the cohesion, the bleeding, the penetration, and the compressive strength.

• 한국조리학회지
• /
• 제13권3호
• /
• pp.44-53
• /
• 2007

This study investigated the utilization of pumpkin cream soup mixture of pumpkin P1(sweet pumpkin 25%, pumpkin 75%), and S1(rice flour 100%) and S3(rice powder 50%, glutinous rice powder 50%) as thickening agents showed highest preference for pumpkin cream soup. Rice powder was used in pumpkin cream soup as a thickening agent. Hunter's color marked the lowest value in using group of flour roux, in contrast with the highest value in using glutinous rice powder roux. The results of viscosity were diverse according to the condition of relationships between the percentage of contents flour, rice and glutinous rice control. For the sensory evaluation, parameters such as appearance, color, viscosity and savory taste increased significantly from the control at glutinous rice roux, and overall acceptability marked the lowest result in flour roux control.

• 한국세라믹학회지
• /
• 제34권10호
• /
• pp.1037-1044
• /
• 1997

Mechanical properties and water stability of HAC/PVA based MDF cement composite were investigated using polyurethane(PU) resin, silane coupling agent and various PVA. The results were as follows ; The flexural strength of MDF cement composite increased as increasing with PVA content. Low-viscosity PVA developed higher flexural strength than high-viscosity PVA under a drying curing condition. But the strength of water immersed specimen decreased. Water stability of MDF cement improved as increasing with content of PU. Consequently, water stability of polyurethane 7% added MDF cement was about 2 times higher than that of the controlled specimen. Furthermore, the strength and water stability of diamine group based silane couling agent in using MDF cement increased and improved dramatically.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.94-100
• /
• 2003

Gel-like compounds containing flammable solvents were prepared to use fur cleaning agents in field of innovative industries and general purposes. And experiments were conducted to improve the defects of liquified flammable solvents from the view point of safety and health hazards. Flammable solvents used in this study were several single component flammable solvents(turpentine oil, N-methyl-2-pyrrolidone(NMP), d-limonene) and multi component flammable solvent(gasoline and ethanol). For gelation of flammable solvents, commercially Known as Aerosil(equation omitted) 200 fumed silica and triethanolamine(TEA) were used as gelation agent dispersant. The analyses on properties of gel-like compounds was studied by gelation and viscosity test pH test, volatility test and differential scanning calorimetry(DSC) measurement. The experimental results indicate that gel-like compounds containing flammable solvents have pH stability, high viscosity, volatile organic compounds(VOC) control by the decrease of volatility and odor component generation, fluidity control etc. From the experimental values, it can be predicted that the safety in the working place is improved by manufacturing flammable solvents into gel-like compounds.