• 한국의류산업학회지
• /
• 제3권4호
• /
• pp.357-361
• /
• 2001

This paper is concern with the effect of various conditions on mechanical properties of textile fabrics by water soluble resin treatment. Resin treatment of cotton, acetate, viscose rayon, polyester, nylon and acryl fabrics were made by aqueous resin treatment to improve the mechanical properties. The mechanical properties of fabrics, the breaking strength and strain were measured and surface reflectance was measured by color eye. The breaking strength and surface reflectance of fabrics by water soluble resin treatment showed difference by the different treatment concentration. The surface reflectance was increased by water soluble resin treatment. The breaking strength was lower in fabrics with resin treatment than fabrics with none treatment.

• 한국의류학회지
• /
• 제11권3호
• /
• pp.57-65
• /
• 1987

The purpose of this study was to investigate the optimum treatment [condition for the Durable press finish of viscose rayon fabrics. Three types of commercial N-methylol crosslinking agents were applied to the fabric utilizing the pad-dry-cure technique. Changes in physical properties were evaluated for the various resin and catalyst concentrations. For DMU, the effect of different catalysts, $MgCl_2$ and $NH_4Cl$, were also compared. DMU treated fabrics showed in crease recovery angle, tensile strength and tearing strength but drastic decrease in abrasion resistance. DMDHEU and MDMDHEU treated fabrics were similar in most physical properties. However, DMDHEU treated fabrics were better in crease recovery angle and stiffness, and MDMDHEU treated fabrics were better in tensile strength, tearing strength and abrasion resistance. For a given resin system, crease recovery angle, tensile strength and stiffness increased with a increase in resin concentration. Tearing strength showed very little change, while abrasion resistance was decreased significantly as the crease recovery angle was increased. For the treatment of DMU, $MgCl_2$ catalyst was much better than $NH_4Cl$ in all physical properties. When $NH_4Cl$ catalyst was used, strength reduction and discoloration were observed. As the catalyst concentration increased, crease recovery angle, stiffness were increased. Tensile strength and tearing strength were increcased than control but at high catalyst concentration, the strength were decreased and abrasion resistance was significantly lowered. DMDHEU and MDMDHEU were more sensitive to catalyst concentrations than DMU.

• 한국의류학회지
• /
• 제23권1호
• /
• pp.3-13
• /
• 1999

This study was performed for purpose of getting fundamental information requisite to wear velvet clothes that is more comfortable for the human body and also the environment. It was carried out in a human wearing test and thermal manikin test at the same time in a controlled-condition chamber. The experimental environment had a ambient temperature of 15$\pm$0.5$^{\circ}C$ with the relative humidity at 5$^{\circ}C$$\pm$5% and with air velocity at less that than 0.2m/sec. Velvet differ from common plain weaves in thermal properties because it's constructed in two parts one is ground part and the other part is pile part. In order to investigate the thermal resistance of velvet eight different combination of 4 velvet kinds and 2 lings kinds as experimental clothes. [(4 velvet kinds : Acetate cuprammoium Rayon Cotton Wool) (2 lining kinds : acetate viscose rayon)longrightarrow8 combination: Aa, Av, Ra, Rv, Ca, Cv, Wa, Wv: the simplified character] The results of this study can be summarized as follows : 1. For the regional thermal resistance the differences in eight clothes as well as differences in each part were significant. As a whole the breast part showed the highest thermal resistance and the leg part was higher than the shank part. The rank of the total thermal resistance was put at Wa>Wv>Ca>Cv>Aa>Av>Ra>Rv in this order. 2. Considered clothing microclimate microclimate temperature has a similar tendency to the total thermal resistance. It showed a significance in the differences of eight clothes and each parts. the belly part was highest in every combination. On the other hand for clothing humidity there was a significance between back and breast part only in the human wearing test. 3. It was indicated that CLO value was highly positively correlated with the clothings' weight and showed a high negative correlation with the air permeability.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1993년도 춘계학술대회논문집
• /
• pp.100-109
• /
• 1993

To investigate the work-relatedness of carpal tunnel syndrome of some workers at packing department in a rayon manufacturing company, reseracher studied the symptoms and physical sign related to carpal tunnel syndrome of the workers at packing, ysrning, and washing department. The results are as follows: 1. By the results of ergonomic study, the packing work had the considerable probability to develop the carpal tunnel syndrome. 2. The prevalences of symptoms, physical sign and case by definition were higher in woman workers than in man workers. 3. In female workers, the age-agjusted prevalence rates of symptoms were 11.6/1, 000 in workers at washing department, 111.6/1, 000 in workers at packing department, and 70.1/1, 000 in workers at yarning department. In male workers, the age- adjusted rates of symptoms were 92.1/1, 000 in workers at washing department, 210.1/1, 000 in workers at packing and delivery department, and 0.0/1, 000 in workers at yarning department. 4. In female workers, the age-adjusted prevalence rates of physical signs were 119.5/1, 000 in workers at washing department, 104.4/1, 000 in workers at packing department, and 84.5 in workers at yarning department. In male workers, the age-adjusted rates of physical signs were 65.7/1, 000 in workers at washing department, 59.0/1, 000 in workers at packing and delivery department, and 176.9/1, 000 in workers at yarning department. 5. In female workers, the age- adjusted prevelence rates of carpal tunnel cases by case definition were 123.1/1, 000 in workers at washing department, 1117.2/1, 000 in workers at packing department, and 60.2/1, 000 in workers at yarning department. In male workers, the age-adjusted of cases were 355.9/1, 000 in workers at packing and delivery department, and 0.0/1, 000 in workers at other two departments. 6. The most of female workdrs at washing departmentn had the work history at packing department. 7. We concluded the carpal tunnel syndrome of female workers at packing department were work related.

• 한국수산과학회지
• /
• 제41권4호
• /
• pp.237-242
• /
• 2008

The tunic of Styela clava(SCT) consists of a proteoglycan network. Regenerated cellulose films were prepared by solution casting and coagulation of SCT in N-methylmorpholine-N-oxide(NMMO)/$H_2O$(87/13 wt%). The crystalline structure of powdered SCT was primarily that of cellulose I. The crystalline structure of SCT films exhibited a cellulose II structure, similar to that of viscose rayon. Physical characterization of SCT films and fibers revealed an intrinsic viscosity($\eta$) of 6.35 dL/g, average molecular weight($M_w$) of 423,000 g/M, and fiber density of 1.50 $g/cm^3$ with a moisture regain and water absorption of 10.20% and 365%, respectively. The results were similar to those of cellulose films regenerated from wood pulp. Films prepared with 6 wt% SCT exhibited strong tensile strength, high water absorption, and a greater degree of elongation. Scanning electron micrographs(SEM) of film cross-sections showed a layered, sponge-like structure.

• 한국산업융합학회 논문집
• /
• 제5권3호
• /
• pp.213-218
• /
• 2002

Total nitrogen is a major pollutant which mostly causes eutrophication and red tide. Wastewater effluent from printing of cotton-viscose rayon containing high concentrations of total nitrogen can not be effectively treated with a typical biological treatment process. This paper provides a new treatment process and experimental results for the removal of high strength nitrogen from dyeing wastewater. The optimum conditions of air stripping for the removal of total nitrogen include around pH 12, temperature $60^{\circ}C$ with 60 minutes of stripping time. In case of a filtration-air stripping process, an initial level ($500mg/{\ell}$) of total nitrogen was significantly reduced to below $60mg/{\ell}$. Deconite was synthesised for further decomposition of organic nitrogen. Thus, a filtration-decomposition-air stripping process was possibly achieved, by which a high level ($900mg/{\ell}$) of total nitrogen was effectively removed to below $60mg/{\ell}$ P. Finally, a continuous new process for the removal of total nitrogen is proposed and confirmed, based on batch experimental results, and its process validity is further discussed throughout.

• 복식
• /
• 제54권4호
• /
• pp.129-144
• /
• 2004

The modems who lives complicated society, the silence which the Orient thought asserts leads and to get comfortable. It is becoming, the like this social atmosphere will in the interest regarding a manual example and the Orient material, the use of the embroidery textile goods is increasing specially. The purpose of this article is to suggest a model for development of machine embroidery fabric material and highly value added apparel industries. The multi-headed embroidery machine where the application scope is wide from the dissertation, we are requested' NaNa company'. The multiheaded embroidery machine uses TAJIMA TMFD-G620 and SUNSTAR SWF-／B-WD(X) 620-100 the embroidery textile uses the silk, the cotton and the synthesis fertile goods etc 24 type, the embroidery thread Maraton thread(viscose rayon 100％) with used the cord. The 8 Korean motives are made on 23 fabrics, 6 of which are full-sized manufactured one-pieces and the other 17 of which are produced to home interior goods such as curtains or fashion accessories like handbags as simulations. Among the products, the pattern-4-1 and the pattern-4-2 are contracted with local fashion industry, and the pattern-1-1～3 are dealing with other companies in Japan. The computerized machine-embroidering and simulation producing of fashion items are available to reduce the cost in making samples and transfer the old labor ＆ toil-centered industry into the new technique ＆ knowledge centered one.

• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.79-91
• /
• 1993

The purpose of this study is to prepare the newer, more comfortable of urea-formaldehyde resin finished fabrics. The methods of this study are by making examinations and comparisons the relations between the thickness, fabrics counts, weight, moisture regain and crease recovery of cotton and viscose rayon fabrics caused by condition of urea-formaldehyde resin finishing and warm retaining ability and warm-cool sense. The analytic results of thermal character in state of fabrics material finished with urea-formaldehyde are as follows: 1. The warm retaining ability has no correlation with mixing ratio of resin but the increase of the warm retaining ability has correlation with the increase of concentration of urea-formaldehyde resin. 2. The result pf multiple regression analysis for effect of physical property according to the concentration of resin to the warm retaining ability revealed as below. As the weight, thickness and density increase and moisture regain decreases, the warm retaining ability increases. 3. The qmax value has no correlation with mixing ratio of resin but the increase of the qmax value has correlation with the increase of resin concentration. In the end, the effect of it promotes cool sense. 4. The result of multiple regression analysis for effect of physical property according to the concentration of resin to the qmax value revealed as below. As he weight and thickness increase, the qmax value decrease. But, as the density and crease recovery increase, the qmax value increase.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.569-573
• /
• 2013

In this study, activated carbon fabric was prepared from a cellulose-based polymer (viscose rayon) via a combination of physical and chemical activation (mixed activation) processes by means of $CO_2$ as a gasifying agent and surface and adsorption properties were evaluated. Experiments were performed to investigate the consequence of activation temperature (750, 800, 850 and $925^{\circ}C$), activation time (15, 30, 45 and 60 minutes) and $CO_2$ flow rate (100, 200, 300 and 400 mL/min) on the surface and adsorption properties of ACF. The nitrogen adsorption isotherm at 77 K was measured and used for the determination of surface area, total pore volume, micropore volume, mesopore volume and pore size distribution using BET, t-plot, DR, BJH and DFT methods, respectively. It was observed that BET surface area and TPV increase with rising activation temperature and time due to the formation of new pores and the alteration of micropores into mesopores. It was also found that activation temperature dominantly affects the surface properties of ACF. The adsorption of iodine and $CCl_4$ onto ACF was investigated and both were found to correlate with surface area.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제45차 학술발표회
• /
• pp.33-33
• /
• 2011

Artificial silk that called "Ponggi (Gyeongsangbukdo, Korea) In-Gyeun" in Korea is entirely viscose rayon of which made main component refined larches and cotton linter. It also is natural fabrics with light weight, cool texture, free from the body and well ventilation property, so, feel good touch during the wearing. In addition, it often used as summer cloth and bedding because it has good absorbancy to perspiration and antistatic. The "Hanji", made of paper mulberry, is known as useful material for human. In this research focused on dyeability of Artificial silk/paper mulberry mixed fabrics using Dendropanax morbifera Lev.(called as "Hwangchil") Especially, the results were in comparison to the dyeing properties of Hwangchil with liquid/solid fermentation or not. As the results, The ${\Delta}E$ difference was dominated when the fabric dyed with fermentation by solid state at $60^{\circ}C$. And it was confirmed that the pH of fermented dye had an important influence in the coloration.